Operators Manual

English – 29
TECHNICAL DATA
Guide bar and saw chain combinations
The following cutting attachments are approved for the models Husqvarna 536LiP4 and 536LiPT5. The A318 bar is used
on the 536LiP4 and 536LiPT5 only.
Saw chain filing and file gauges
EC Declaration of Conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel [phone] declares that the battery-operated chain clearing
saw
Husqvarna 536LiP4 and 536LiPT5 with serial numbers dating 2016 and onwards (the year is clearly stated on the
rating plate, followed by the serial number) comply with the requirements of the COUNCIL’S DIRECTIVE:
- of May 17, 2006 ”relating to machinery” 2006/42/EC.
- of February 26, 2014 ”relating to electromagnetic compatibility” 2014/30/EU.
- of June 8, 2011 on the ”restriction of use of certain hazardous substances” 2011/65/EU.
The following standards have been applied:
EN 60745-1, EN 60335-1, EN ISO 11680-1:2011, EN 60335-2-29, EN 62133:2011
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC type examination in
accordance with the machinery directive’s (2006/42/EC) article 12, point 3b.
Intertek Semko AB, Box 1103, SE-164 22 Kista, Sweden has issued a voluntary type approval for Husqvarna AB.
Huskvarna January 10, 2017
Lars Roos, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
The following combinations are CE approved.
Guide bar Saw chain
Length, inch Pitch, inch Gauge, mm Type
Length, drive links
(no.)
10 1/4 1,3 Husqvarna H00 58
12 1/4 1,3 Husqvarna H00 64