Operators Manual
Table Of Contents
- Symbols on the machine:
- Symbols on the battery and/or on the battery charger:
- Symbols in the operator’s manual:
- Contents
- Note the following before starting:
- Dear Customer,
- General power tool safety warnings
- Personal protective equipment
- Battery and battery charger
- Machine¢s safety equipment
- Cutting equipment
- Fitting the loop handle
- Fitting the handlebar
- Assembling the guard
- Adjusting the harness and trimmer
- Standard harness
- Transport position, handlebar
- Battery status
- Battery charger
- Transport and storage
- Disposal of the battery, battery charger and machine
- Check before starting
- Connect battery to the machine
- Starting and stopping
- General working instructions
- Inspection and maintenance
- Troubleshooting schedule
- Maintenance schedule
- Technical data
- EC Declaration of Conformity (Applies to Europe only)
24 – English
TECHNICAL DATA
Technical data
Use only a Husqvarna original BLi battery in your machine.
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/
EC. The difference between guaranteed and measured sound power is that the guaranteed sound power also includes
dispersion in the measurement result and the variations between different machines of the same model according to
Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (standard
deviation) of 3 dB (A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 2 m/s
2
.
536LiL 536LiR
Motor
Motor type BLDC (brushless) 36V BLDC (brushless) 36V
Speed of output shaft, rpm 5500 5500
Cutting width, mm 400 400
Weight
Weight without battery, kg 3 3,8
Weight with battery, kg 4,2 5
Battery runtime
Battery runtime, min, (free run) with SavE activated 60 60
Noise emissions
(see note 1)
Sound power level, measured dB (A) 92 92
Sound power level, guaranteed L
WA
dB (A) 96 96
Noise levels
(see note 2)
Equivalent sound pressure level at the operator’s ear,
measured according to EN ISO 60335-91-2 and ISO
22868, dB(A):
81 76
Vibration levels
(see note 3)
Vibration levels at handles, measured according to ISO
22867, m/s
2
Equipped with trimmer head (original), left/right 1.7/0.5 2.6/2.1
Approved chargers for the specified batteries, BLi.
Battery charger QC120 QC330
Mains Voltage, V 220-240 100-240
Frequency, Hz 50-60 50-60
Power,W 125 330
Approved accessories Type Cutting attachment guard, Art. no.
Trimmer head T25B (Ø 2.0 mm line) 577 01 83-01