Operating Guide
English
–
3
CONTENTS
Contents
Note the f
ollowing before starting:
Please read the oper
ator’s manual carefully and make sure
you understand the instructions before using the machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please refer
to the operating instructions for the machine.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
Long-term exposure to noise can result in permanent hearing
impairment. So always use approved hearing protection.
The machine is only designed for cutting branches and twigs.
KEY
TO SYMBOLS
Symbols
....................................................................... 2
CONTENTS
Contents
...................................................................... 3
Note the following before starting: ................................ 3
WHA
T IS WHAT?
What is what on the hedge tr
immer attachment? ........ 4
SAFETY INSTR
UCTIONS
Machine
′
s safety equipment ........................................ 5
ASSEMBL
Y
Fitting the hand guard and loop handle (HA 110)
......... 6
Fitting the cutting head ................................................ 6
Fitting the handle (HA 850)........................................... 6
ST
ARTING AND STOPPING
Chec
k before starting ................................................... 7
W
ORKING TECHNIQUES
Gener
al working instructions ....................................... 8
MAINTENANCE
Gear housing
............................................................... 10
Cleaning and lubrication .............................................. 10
Maintenance schedule ................................................. 10
TECHNICAL D
ATA
T
echnical data .............................................................. 28
!
W
ARNING! Under no circumstances may the
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
!
W
ARNING! This accessory may only be used
together with the intended clearing saw/
trimmer, see under heading ”Approved
accessories” in chapter Technical data in the
machine’s Operator’s Manual.