Operators Manual

For more information about the operating modes
Start, Park and Pause , refer to Operation on
page 33 .
3.10.4 Account
In this menu there is an overview of the account
settings and you can log off from the app.
3.10.4.1 To set the unit format
1. Select the unit format
Metric or Imperial .
3.10.5 My mowers
When choosing My mowers you can manage all
the products paired to your account, as well as
add new ones. If there are several paired
products it is possible to select one of them as
Current mower .
To pair a new product to the Automower
®
Connect app:
1. Select the plus sign (+).
2. Select model.
3. Follow the instructions in the Automower
®
Connect app to finalize the pairing.
3.10.6 Automower
®
Direct
Automower
®
Direct uses short-range Bluetooth
®
communication, and is included in Automower
®
520/550.
Automower
®
Direct is useful if the operator has
the Automower
®
Connect app and the PIN code,
but has not created a Husqvarna account.
Automower
®
Direct is also useful if the
connection with the product is only temporary.
Husqvarna cannot guarantee the time period or
coverage of the long-range cellular connectivity.
There is therefore a possibility to communicate
with the product through Bluetooth
®
if you are in
short-range of the product. You can use
Automower
®
Direct without a Husqvarna account
as long as you have the product PIN code.
Note: The Automower
®
Direct connection is only
valid as long as you are within Bluetooth
®
range.
If you move out of Bluetooth
®
range, you will
loose the Automower
®
Direct connection and you
must do the connection process again.
3.10.6.1 To start to use Automower
®
Direct
1. Download the Automower
®
Connect app on
your mobile device.
2. Select Automower
®
Direct on the start
screen of the Automower
®
Connect app.
3. Start Bluetooth
®
on your mobile device and
on the product, refer to
To do the basic
settings on page 23
.
4. Select the product to pair with in the
Automower
®
Connect app.
5. Enter the PIN code for the product.
Note: You have access to the menus and
functions as long as you are within Bluetooth
®
short-range.
3.10.7 Map
The map shows the current position of the
product and the set centerpoint for GeoFence.
3.10.7.1 Map settings
1. Open Map in the main menu.
2. Select the settings symbol.
3. Enable or disable
Movement path .
4. Enable or disable GeoFence radius .
5. Select
Map view or Satellite view .
3.11 Settings in Automower
®
Connect
The product has factory settings but
the settings can be adapted to each
work area.
3.11.1 Schedule
In Schedule you can change the
schedule settings for the product.
1439 - 002 - Installation - 25