Operators Manual

between the main area and the secondary area.
The product mows for a selected period of time
or until the battery is empty. When the battery is
empty, the product stops and the message
Needs manual charging shows in the product
display. Put the product in the charging station to
charge the battery. When the battery is charged,
the product moves out of the charging station and
stops. The product is now prepared to start
operation, but needs confirmation from the
operator first. In the
Secondary area mode, the
product operates for a selected period of time or
until the battery is empty.
Note: If you want to cut the main area after the
battery is charged, set the product to Main area
mode before you put the product in the charging
station.
4.4 Operating mode - Park
When selecting Park the following operation
selections can be chosen.
• Park until further notice
• Start with schedule
• Parking duration
4.4.1 Park until further notice
The operation mode Park means that the product
goes back to the charging station where it stays
until a new operation mode is selected and the
START button is pushed.
4.4.2 Start on next schedule
The product goes back to the charging station
where it stays until the next schedule setting let
the product to operate. Use the operation
selection to stop operation temporary, for
example for irrigation or for games on the lawn.
4.4.3 Parking duration
The product goes back to the charging station
and stays for the selected park duration. Use the
operation selection to temporary stop an ongoing
mowing cycle and let the product to stay in the
charging station.
4.4.4 The charging station's park button
The PARK button on the charging station is used
to call the product back to the charging station.
Park in the Automower
®
Connect app offers the
same function. The PARK button on the charging
station is useful for instance when the product
operates in a large work area and the operator
does not have access to the Automower
®
Connect app.
An LED in the PARK button is lit when the button
has been pressed. The LED diode goes out when
the product is parked in the charging station.
The product stays in the charging station until
Start in the Automower
®
Connect app is
activated.
4.4.5 Operating mode - Pause
When selecting
Pause in the Automower
®
Connect app, the product stop the current activity
and pause. The product is paused until either
Park or Start is selected in the Automower
®
Connect app.
4.5 To stop the product
1. Push the STOP button on top of the product.
The product stops and the blade motor stops.
4.6 To switch off the product
1. Press the STOP button on top of the
product.
34
- Operation
1439 - 002 -