Operators Manual

Table Of Contents

CAUTION: Do not put your feet on the

product.

6. Pull the starter rope handle slowly until you feel

some resistance. When you feel resistance, pull the

starter rope handle quickly and with force.

Note: Do not wind the starter rope around your hand.

7. Continue to pull the starter rope handle until the

engine starts.

CAUTION: Do not pull the starter rope to

full extension and do not let go of the

starter rope handle. Release the starter

rope slowly. If you do not obey these

instructions, the engine can become

damaged.

8. Set the choke control to the operation position and

apply full throttle.

To start a warm engine

1. Set the stop switch to the start position.

2. Push the air purge bulb (A) approximately 6 times

until fuel starts to fill the bulb. It is not necessary to

fill the air purge bulb fully.

3. Pull the choke control (B) up and down to set start

throttle.

4. For 555RXT, 555FRM: To engage the throttle

function, push and release the throttle trigger

lockout, the throttle trigger and the start throttle

button (C).

5. Hold the body of the product on the ground with your

left hand.