Product Manual

LowerChute
1. Raise the mower deck to its highest cutting
position.
2. Raiseandholdthedeectorshieldinthe
upright position.
3. Position the lower chute over the mower
opening and align the holes on the lower
chute with the holes on the mower.
4. Insert the bolts (G) through the mower and
chute and fasten with knobs (H).
UpperChute
1. Lower the mower deck to the lowest cutting
position.
2. Insert the upper chute through the opening
in the cover assembly, twisting the chute to
keep the cover gasket in place. Handle the
chute carefully to prevent damage to the full
bag indicator.
H
H
G
G
3. Move the upper chute onto lower chute,
lining up the notches and channels.
4. Stretch bungee latch up onto acorn nut on
upper chute.
4. Install the containers on the support frame,
overlapping containers at the center
supports.
5. Close the cover and lock the latch handles
over the center support tubes.
6
ASSEMBLY
6