Product Manual

1. Slide upper chute onto lower chute, lining up notches and

channels.

2. Stretch bungee latch up onto acorn nut on upper chute to

secure.

UPPER CHUTE INSTALLATION

HOOD SEAL INSTALLATION

1. Install the grommet into hood assembly, making

sure grommet is seated correctly and securely. It is

recommended to use a box pattern as shown when

drilling holes.

2. While holding the grommet securely in place, drill one

/64 (.203) diameter hole through the grommet and hood

assembly at a distance of ¼" (.250) from the outside edge

of the grommet. See illustration.

3. Locate the seal fastening kit (packaged separately). Install

hardware using conﬁguration shown before drilling the

next hole. Repeat procedure with each remaining hole.

CHUTE / HOOD INSTALLATION

Push upper chute through the gasketed opening in the cover

assembly.

LEVELING MOWER DECK

Be sure deck is properly leveled for best mower performance.

See the mower’s operator manual for instructions.

ASSEMBLY