Manual

MAINTENANCE
Adjusting the Mower Deck
WARNINGt
Before performing any service or adjustment checklist:
1. Engage the parking brake.
2. Place the Blade switch in the disengaged position.
3. Turn ignition switch to '°OFF" position and remove the key.
4. Make sure the blades and all moving parts have completely stopped.
5. Disconnect the spark plug wire from all spark plugs and place the wire where it cannot
come in contact with the plug.
WARNINGt
Blades are sharp. Protect your hands
with gloves and/or wrap blades with a
heavy cloth when handling.
Check the tire pressure before adjustment of the
mower deck. See Checking Tire Pressure in
Maintenance. Faulty mower deck adjustments will
cause an uneven mowing result.
Leveling Deck
1. Position the mower on a level, preferably
concrete, surface.
2. Check the pressure in all four tires. See Technical
Data section.
3. Rotate blade to align side to side.
4. Measure from the blade tips to the floor and
compare the results.
5. Turn adjuster nut(s) to level deck if needed.
Side to side blade alignment
8058-155
IMPORTANT INFORMATION
This procedure will place the mower in a
standard measurement position. Additional
adjustment may be required to achieve desired
cut for the type of grass or conditions.
Side to side adjuster nut
8050-015
39