Operating Guide
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Transportation and storage
- Technical data
- Accessories
- Contenido
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Programa de mantenimiento
- Para ajustar el régimen de ralentí
- Para limpiar el sistema de refrigeración
- Para realizar tareas de mantenimiento en la rejilla apagachispas
- Para examinar la bujía
- Aplique grasa al eje de dos piezas
- Para realizar el mantenimiento del filtro de aire
- Para agregar grasa al engranaje angulado
- Transporte y almacenamiento
- Datos técnicos
- Accesorios
- Table des matières
- Introduction
- Sécurité
- Montage
- Fonctionnement
- Entretien
- Transport et entreposage
- Caractéristiques techniques
- Accessoires
To add grease to the bevel gear
• Make sure that the bevel gear is filled ¾ full with
bevel gear grease.
Transportation and storage
Transportation and storage
WARNING: To prevent the risk of fire, make
sure that there are no leaks or fumes during
transportation or storage. Make sure that
there is no risk of sparks or fire.
• Empty the fuel tank before transportation or long-
term storage. Push the air purge bulb to make sure
that all fuel is removed. Discard the fuel at an
applicable disposal location.
• Make sure that the product is clean and that a full
servicing is done before long-term storage.
• Remove the spark plug and put approximately 15 ml
of two-stroke oil into the cylinder. Turn the product 3
times and install the spark plug again.
• Attach the product safely to the vehicle during
transportation.
• Keep the product in a dry, cool and clean space with
good airflow. Keep the product away from children.
Technical data
128CD
LT28CCHV
128LD
LT28CSHV
Engine Specifications
Cylinder displacement, cm
3
28 28
Electrode gap, mm 0.6 0.6
Fuel tank volume, cm
3
400 400
Idling speed, min
-1
2300-3200 2300-3200
Maximum power speed, min
-1
8000 8000
Power output, kW 0.7 0.7
Spark plug Champion QCJ-8Y Champion QCJ-8Y
Maximum output shaft rotation, min
-1
8000 8000
Emissions durability period, h 125 125
Product Dimensions
Weight (excluding cutting equipment), kg 5.0 5.0
215 - 004 - 22.05.2020 15