Product Manual

5
UNASSEMBLED PARTS
ASSEMBLY
Slope Sheet
Key(s)
Keys
(1) Quick
Connect
(1) Oil Drain Tube
Seat
(1) Seat
(3) Flat
Washer
(3) Bolt
Battery
(2) Hex Bolts
(2) Nut Keps
(1) Knob
(1) Cup
Washer
*Installed by Dealer
*Brush Guard Kit
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly easier. Stan dard
wrench sizes are listed.
(1) 5/16" wrench Utility knife
(2) 7/16" wrenches Tire pressure gauge
(2) 1/2" wrenches Pliers
(2) 9/16" wrench
When right or left hand is mentioned in this man ual, it means
when you are in the operating po si tion (seated be hind the
steer ing wheel).
Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes.
To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use
the correct tools as necessary to ensure proper tightness.
TO REMOVE TRACTOR FROM CARTON
UNPACK CARTON
• Remove all accessible loose parts and parts cartons
from carton.
• Remove end panels and lay side panels flat.
• Check for any additional loose parts or cartons and
remove.
BEFORE REMOVING TRACTOR FROM
SKID