Repair Parts Manual

15
TRACTOR - MODEL NO. TS 148X (96043030300), PRODUCT NO. 960 43 03-03
MOWER DECK
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
1 532 41 82-24 Kit, SVC, Weldment
6 532 19 72-48 Cover Mandrel LH
7 587 45 24-01 Cover Mandrel RH
11 532 18 00-54 Blade High Lift
12 532 40 48-51 Rod Anti-Sway
13 587 25 64-01 Shaft Asm.
14 532 18 72-81 Housing, Mandrel
15 585 32 39-01 Bearing, Mandrel
16 819 13 13-12 Washer 13/32 x 13/16 x 12 Ga.
17 872 11 05-05 Bolt 5/16-18 x 5/8
18 872 14 05-05 Bolt RdHd 5/16-18 unc x 5/8
19 532 19 42-08 Pin Cotter 5/16 Bow Tie Lock
20 532 17 43-78 Baffl e Vortex
21 873 68 05-00 Nut, Crownlock 5/16-18 unc
22 532 17 44-93 Stripper Mandrel
24 532 10 53-04 Cap Sleeve
25 532 17 81-02 Spring, Torsion
26 532 11 04-52 Nut, Push
27 532 18 17-07 Defl ector Shield
29 532 13 14-91 Rod, Hinge
32 532 15 35-32 Pulley, Mandrel
33 532 40 02-34 Nut, Flg. Top Lock
36 584 30 93-01 Screw Sems 7/16-20 x 1 Hx Hd
39 532 19 73-80 Pulley, Idler, 4.50 Hub
41 584 95 39-01 Bolt Hx Wshr. Hd 313-18 x 1.19
43 532 19 60-65 Arm, Idler
46 532 13 77-29 Screw, Thdroll. 1/4-20 x 5/8
47 593 77 34-01 Belt Deck Drive
48 532 19 73-79 Pulley Idler 4.50 RAW
49 873 90 06-00 Nut, Lock Flg. 3/8-16 unc
50 817 49 06-36 Screw TT 3/8-16 x 2-1/4
52 532 19 31-97 Pulley Idler 48" Primary
54 872 11 06-12 Bolt Carr. Sh 3/8-16 x 1-1/2 Gr. 5
97 532 17 85-15 Washer Hardened
98 532 19 61-05 Spring Drive
113 539 10 72-71 Bolt Rdhd Sqnk 5/16-18 x 1 Gr. 5
114 532 19 74-51 Rod Tension Relief
116 532 19 34-06 Bolt, Shoulder
117 589 52 73-01 Gauge Wheel
120 819 12 14-14 Washer, 5/16 Flat, Ste. Std.
122 532 18 75-57 Bushing Tension Relief
185 873 90 07-00 Nut Lock Flange 7/16-14 Gr. 5
187 532 19 51-61 Stud Fastener w/"D" Anti-Rotation
188 873 90 05-00 Nut Lock Hex Flange
189 587 14 05-02 Arm Susp. Mower Rear
190 532 19 65-39 Bolt Shoulder
194 874 49 07-36 Bolt 7/16 - 24
241 532 15 29-27 Screw TT #10-32.5 3/8 Flange
242 532 41 55-98 Port, Washout
250 585 31 80-05 Plate Reinforcement Front
251 585 32 24-05 Plate Reinforcement Side Bolt
252 592 80 78-01 Bolt 1/4-20 x 1", ZN. SQ. Nck
253 873 90 04-00 Nut Hx Flg 1/4-20 unc
- - 532 41 64-05 Coupling Quick Connect
- - 587 12 54-01 Mandrel Assembly (Includes housing
(key #14), shaft assembly (key
#13), and bearing only (key #15) -
pulley/nut/washer and blade bolt/
washers not included)
- - 532 41 82-23 Replacement Mower, Complete
KEY PART
NO. NO. DESCRIPTION