Product Manual

7
LOWER CHUTE (See Fig. 4A or 4B)
1. Identifythelowerchuteforyourmodel.
NOTE:Lowerchutefor46inchmodelsarestampedwith
part #405455. Lower chute for 48 inch modelsare not
stamped with part number.
2. Raiseandholddeflectorshieldinuprightposition.
3. Placeslotinlowerchuteovermountingtabonmower
and position lower chute over mower opening as shown.
4. Hookrearlatchintoflangeholeonbackofmower.
5. Hookfrontlatchintotabholeonfrontofmower.
4
CAUTION: Do not remove deflector
shield from mower. Raise and hold
shield when attaching lower chute
and allow it to rest on chute while in
operation.
FIG. 4A
FIG. 4B
02552
REAR LATCH
FRONT
LATCH
DEFLECTOR
SHIELD
TAB
OPTIONAL
FRONT
GAUGE
WHEEL
DEFLECTOR SHIELD
HINGE BRACKET
DEFLECTOR SHIELD
FRONT LATCH
REAR LATCH
MOUNTING
TAB
46 INCH MODELS
48 INCH MODELS
5
3. Pushinandturnupperchuteuntilitisinlinewithlower
chute.
4. Alignthebossesonlowerchutewithalignmentslots
on upper chute and slide together.
5. Securewithrubberlatchbyhookingholeinlatchover
latch pin.
LEVEL MOWER DECK
Ensuredeckisproperlyleveledforbestmowerperfor-
mance.Seeyourtractorsoperator'smanualforinstruc-
tions.
6
FIG. 5A
UPPER
CHUTE
COVER
ACORN NUT
SPLIT SPACER
WASHER
SCREW
48 INCH MODELS
46 INCH MODELS
FIG. 5B
HANDLE
FULL BAG
INDICATOR
LOWER
CHUTE
BOSSES
LATCH PIN
ALIGNMENT
SLOT
RUBBER
LATCH
UPPER
CHUTE
COVER
UPPER CHUTE (See Figs. 5A and 5B)
1. Lowermowertoitslowestcuttingposition.
2. Assembleandinstalllatchpinhardwareintoappropriate
holeasshowninfigure5A.
3. Assembleupperchute byinserting curvedend into
holeinbackofcover.
TIP: Holding upper chute as shown and twisting while
installingincoverwillhelpkeeptherubbersealinplace.
NOTE: Handle carefully so as not to damage full bag
indicator.