Use and Care Guide

SERVICE AND ADJUSTMENTS

Fig. 24

Fig. 25

NEW TINE

WORN TINE

Fig.23

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

(See Fig. 26)

The throttle control has been preset at the factory and

ad just ment should not be necessary. If adjustment is

necessary, proceed as follows:

• With engine not running, remove air cleaner cover and

cartridge (See “AIR CLEANER” in the Maintenance

section of this manual).

• Move remote throttle control to “FAST” position.

tine_3

TINE

3-1/2" MAX

(9 CM)

TRANS MIS SION

tine_13

SHARP EDGE

HAIRPIN CLIP

SHARP

EDGES

COUNTER

TINE

ROTATION

SHARP EDGES

SHARP EDGE

SHEAR PIN

HAIRPIN CLIP

SHARP

EDGE

• If throttle lever on engine touches high speed stop, no

further adjustment is necessary. If throttle lever does

not touch high speed stop, continue with adjustment

procedure.

• Loosen cable clamp screw.

• Pull cable backward until throttle lever contacts the

high speed stop, and hold in this position.

• Tighten cable clamp screw securely.

• Reinstall air cleaner cover and cartridge.