Operating Guide

8
KNOW YOUR TILLER
READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER.
Compare the illustrations with your tiller to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
These symbols may appear on your Tiller or in literature supplied with the product. Learn and understand their
meaning.
Fig. 7
MEETS ANSI SAFETY REQUIREMENTS
Our tillers conform to the safety standards of the American National Standards Institute.
CHOKE CONTROL - Used when starting a cold engine.
DEPTH STAKE - Controls depth at which tiller will dig.
ENGINE ON/OFF SWITCH - The engine switch enables
and disables the ignition system.
FUEL VALVE - The fuel valve opens and closes the pas-
sage between the fuel tank and the carburetor.
LEVELING SHIELD - Levels tilled soil.
OUTER SIDE SHIELD - Adjustable to protect small
plants from being buried.
RECOIL STARTER HANDLE - Used to start the engine.
SHIFT/EMERGENCY DISENGAGE LEVER - Used to
shift transmission gears and to disengage powered drive
and tines.
SHIFT LEVER INDICATOR - Shows which gear the
trans mis sion is in.
THROTTLE CONTROL - Controls engine speed.
TINE CONTROL - Used to engage tines.
OPERATION
DEPTH STAKE
SHIFT/EMERGENCY
DISENGAGE LEVER
LEVELING
SHIELD
OUTER SIDE
SHIELD
RECOIL
STARTER
HANDLE
SHIFT LEVER IN DI CA TOR
THROTTLE
CONTROL
CHOKE CONTROL
FUEL VALVE
ENGINE ON/OFF
SWITCH
TINE CONTROL
TILLING
FORWARD
NEUTRAL /
EMERGENCY
DISENGAGE
REVERSE
FAST
CHOKE FUEL OIL
RUN
STOP
SLOWCAUTION
OR WARNING
ENGINE
ON
ENGINE
OFF