Operating Guide

6
ASSEMBLY
2. Installing the Discharge Chute
Procedure
1. Install the chute deflector to the discharge chute using
bolts and, washer, nut, deflector knob and cap plunger
(Figure 4).
2. Install the discharge chute to the chute base using
three screws and nuts.
IMPORTANT: Do not overtighten the flange nuts; other-
wise you may damage the discharge chute.
Figure 4
1. Deflector
2. Carriage bolts
3. Flange nuts 5/16-18
4. Washer
5. Knob
6. Discharge chute
7. Carriage Bolt
8. Shoulder Bolt
9. Flange nuts 1/4-20
10. Cap Plunger
2
2
7
6
3
3
8
4
9
5
10
1
3. Installing the Upper Handle
Cover
1. Install the upper handle cover to the handles using four
screws (Figure 5).
Figure 5
1. Upper handle cover
2. Screws
2
1