Product Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear Customer,
- Before using a new chain saw
- Important
- Always use common sense
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inetria activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Starting and stopping
- Before use:
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Carburettor with movement limiters
- Carburettor without movement limiters
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Starter
- Air filter
- Spark plug
- Lubricating the bar tip sprocket
- Needle bearing lubrication
- Adjustment of the oil pump
- Cooling system
- ”Air Injection” centrifugal cleaning
- Winter use
- Heated handles
- Maintenance schedule
- Technical data
- Bar and chain combinations
- Saw chain filing and file gauges
- EC-declaration of conformity
English – 39
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for noise pressure
levels under various working conditions with the following time distribution: 1/2 idling, 1/2 max. load.
Note 3: Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration levels under
various working conditions with the following time distribution: 1/2 idling, 1/2 max. load.
Note 4: Different bar lengths and different saw chains apply on different markets, see the next page.
385XP 390XP
Engine
Cylinder displacement, cm
3
84,7 88
Cylinder bore, mm 54 55
Stroke, mm 37 37
Idle speed, rpm 2700 2700
Power, kW/ rpm 4,6/9600 4,8/9600
Ignition system
Manufacturer of ignition system SEM SEM
Type of ignition system CD CD
Spark plug NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer of carburettor Tillotson Tillotson
Carburettor type HS 299A HS 299A
Fuel tank capacity, litre 0,9 0,9
Oil pump capacity at 9,000 rpm, ml/min 6-24 6-24
Oil tank capacity, litre 0,5 0,5
Type of oil pump Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, kg 7,0 7,1
XPG: 7,2 XPG: 7,3
Noise emissions
(see note 1)
Sound power level, measured dB(A) 117 117
Sound power level, guaranteed L
WA
dB(A) 118 118
Sound levels
(see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A) 105,5 107,5
Vibration levels
(see note 3)
Front handle, m/s
2
5,8 5,8
Rear handle, m/s
2
8,6 7,0
Chain/bar
(see note 4)
Standard bar length, inch/cm 18"/46 18"/46
Recommended bar lengths, inch/cm 18-28”/46-70 18-28”/46-70
Usable cutting length, inch/cm 17-27"/43-68 17-27"/43-68
Pitch, inch/mm 3/8" /9,52 3/8" /9,5
Thickness of drive links, inch/mm 0,058/1,5 0,058/1,5
Type of drive sprocket/number of teeth Rim/7 Rim/7
Chain speed at max. power, m/sec 21,4 21,4