Product Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear Customer,
- Before using a new chain saw
- Important
- Always use common sense
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inetria activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Starting and stopping
- Before use:
- General working instructions
- How to avoid kickback
- General
- Carburettor adjustment
- Carburettor with movement limiters
- Carburettor without movement limiters
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Starter
- Air filter
- Spark plug
- Lubricating the bar tip sprocket
- Needle bearing lubrication
- Adjustment of the oil pump
- Cooling system
- ”Air Injection” centrifugal cleaning
- Winter use
- Heated handles
- Maintenance schedule
- Technical data
- Bar and chain combinations
- Saw chain filing and file gauges
- EC-declaration of conformity
English
–
3
CONTENTS
Contents
KEY
TO SYMBOLS
Symbols on the machine:
.............................................. 2
Symbols in the operator’s manual: ................................ 2
CONTENTS
Contents
....................................................................... 3
INTR
ODUCTION
Dear Customer
, ............................................................. 4
WHA
T IS WHAT?
What is what on the chain sa
w? ................................... 5
GENERAL SAFETY PRECA
UTIONS
Bef
ore using a new chain saw ...................................... 6
Important ....................................................................... 6
Always use common sense .......................................... 6
Personal protective equipment ...................................... 7
Machine
′
s safety equipment ......................................... 7
Cutting equipment ......................................................... 10
ASSEMBL
Y
Fitting the bar and chain
............................................... 16
FUEL HANDLING
Fuel
............................................................................... 17
ST
ARTING AND STOPPING
Star
ting and stopping .................................................... 19
W
ORKING TECHNIQUES
Bef
ore use: .................................................................... 21
General working instructions ........................................ 21
How to avoid kickback ................................................... 28
MAINTENANCE
Gener
al ......................................................................... 29
Carburettor adjustment ................................................. 29
Carburettor with movement limiters .............................. 29
Carburettor without movement limiters ......................... 30
Checking, maintaining and servicing chain saw safety
equipment ..................................................................... 32
Muffler ........................................................................... 34
Starter ........................................................................... 34
Air filter .......................................................................... 35
Spark plug ..................................................................... 35
Lubricating the bar tip sprocket ..................................... 36
Needle bearing lubrication ............................................ 36
Adjustment of the oil pump ........................................... 36
Cooling system ............................................................. 36
”Air Injection” centrifugal cleaning ................................. 37
Winter use ..................................................................... 37
Heated handles ............................................................. 37
Maintenance schedule .................................................. 38
TECHNICAL D
ATA
T
echnical data ............................................................... 39
Bar and chain combinations ......................................... 40
Saw chain filing and file gauges .................................... 40
EC-declaration of conformity ......................................... 41