Product Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear Customer,
- Before using a new chain saw
- Important
- Always use common sense
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle trigger lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fueling
- Fuel safety
- Starting and stopping
- Before use:
- General working instructions
- How to avoid kickback
- Carburettor adjustment
- Carburettor with movement limiters
- Carburettor without movement limiters
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Starter housing
- Air filter
- Spark plug
- Lubricating the bar tip sprocket
- Needle bearing lubrication
- Adjustment of the oil pump
- Cooling system
- ”Air Injection” centrifugal cleaning
- Winter use
- Heated handles
- Maintenance schedule
- Technical data
- Guide bar and saw chain combinations
- Saw chain filing and file gauges
- EC Declaration of Conformity
English – 41
TECHNICAL DATA
Guide bar and saw chain combinations
The following cutting attachments are approved for the model Husqvarna 395XP.
Saw chain filing and file gauges
Guide bar Saw chain
Length, inch Pitch, inch Gauge, mm
Max. nose
radius
Type
Length, drive
links (no.)
18 3/8
1,5
11T
Husqvarna H42
68
20 3/8 11T 72
24 3/8 11T 84
28 3/8 11T 92
18 3/8 34 mm 68
20 3/8 34 mm 72
24 3/8 34 mm 84
28 3/8 34 mm 92
24 0,404
1,6
34 mm
Husqvarna H64
76
28 0,404 34 mm 84
30 0,404 42 mm 92
36 0,404 42 mm 104