Manual

Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the
Maintenance section=
Daimy maintenance WeekBy maintenance MontHy maintenance
Check the brake band on the chain brake
On chain saws without a catalytic for wear. Replace when less than 0.6 mm
Clean the outside of the machine, converter, check the cooling system (0,024 inch) remains at the most worn
weekly, point=
Check that the components of the throttle
control work safely. (Throttle lock and Check the starter, starter cord and return Check the clutch centre, clutch drum and
throttle controL) spring, clutch spring for wear.
Clean the chain brake and check that it
operates safely. Make sure that the chain Check that the vibration damping Clean the spark plug. Check that the
catcher is undamaged, and replace it if elements are not damaged, electrode gap is 0.5 mm (0,020 inch).
necessary.
The bar should be turned daily for more
even wear. Check the lubrication hole in
the bar, to be sure it is not ciogged. Clean Lubricate the clutch drum bearing. Clean the outside of the carburetor.
the bar groove. If the bar has a sprocket
tip, this should be lubricated=
Check that the bar and chain are getting File off any burrs from the edges of the Check fueI hose for cracks or other
sufficient oiI= bar= damage. Change if necessary.
Check the saw chain with regard to visible
cracks in the rivets and links, whether the
saw chain is stiff or whether the rivets and Clean or replace the spark arrestor mesh Empty the fuel tank and clean the inside.
on the muffler.
links are abnormally worn. Replace if
necessary.
Sharpen the chain and check its tension
and condition. Check the drive sprocket Clean the carburetor compartment. Empty the oil tank and clean the inside.
for excessive wear and replace if
necessary.
Clean the starter units air intake. Clean the air fiIter. Replace if necessary. Check atI cables and connections.
Check that nuts and screws are tight.
Check that the stop switch works
correctly=
Check that there are no fueI leaks from
the engine, tank or fuel lines=
On chain saws with a catalytic converter,
check the cooling system daily.
English - 37