User Manual

ASSEMBLY
English – 45
where you should operate the socket spanner when
loosening or tightening the nut.
Fitting the transport guard
• Insert the blade in the transport guard (A).
• Snap the two fasteners (B) into the slots (C) to secure
the transport guard.
Adjusting the harness and brush
cutter
Quick release
At the front is an easily accessible, quick release. Use this
if the engine catches fire or in any other emergency
situation that requires you to free yourself from the
machine and harness.
!
WARNING! When using a brush cutter it
must always be hooked securely to the
harness. Otherwise you will be unable to
control the brush cutter safely and this
can result in injury to yourself or others.
Never use a harness with a defective
quick release.
1-H1158941-01,533-553RS west.fm Page 45 Tuesday, July 11, 2017 2:29 PM