Operator's Manual

22 – English
TECHNICAL DATA
1158419-49 Rev. 4 2018-10-09
Technical data
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! This spark ignition system complies with the Canadian ICES-002 standard.
NOTE! The sound pressure level at operator’s ear and vibrations on the handles are measured with all the approved
cutting attachments for the machine. The table indicates the lowest and highest values.
324L
Engine
Cylinder displacement, cu.in/cm
3
1,53/25,0
Cylinder bore, inch/mm 1,38/35
Stroke, inch/mm 1,03/26
Idle speed, rpm 3100
Recommended max. speed, rpm 12000
Speed of output shaft, rpm 8220
Max. engine output, acc. to ISO 8893, kW/ rpm 0,7 / 7000
Catalytic converter muffler No
Speed-regulated ignition system No
Ignition system
Manufacturer/type of ignition system Ikeda
Spark plug NGK CMR5H
Electrode gap, inch/mm 0,024/0,6
Fuel and lubrication system
Manufacturer/type of carburetor Walbro
Fuel tank capacity, US pint/litre 1,16/0,55
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 11.0/5,0
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear, measured according to
ANSI B175.3-2013, dB(A), min/max:
90/97
Vibration levels
Equivalent vibration levels (a
hv,eq
) at handles, measured according to EN ISO
11806 and ISO 22867, m/s
2
Equipped with trimmer head (original), left/right 6,5 / 10,0
Vibration levels at handles, measured according to ANSI B175.3-2013, m/s
2
At idle, left/right handles, min.: 1,9/1,8
At idle, left/right handles, max.: 2,2/1,9
At max. speed, left/right handles, min.: 4,8/11,3
At max. speed, left/right handles, max.: 8,9/14,0
324L
Approved accessories Type Cutting attachment guard, Art. no.
Arbor shaft thread M10
Trimmer head
S35 (Ø 2.4 - 3.0 mm cord) 588 54 37-01 / 503 97 71-01
T25 (Ø 2.0 - 2.7 mm line) 588 54 37-01 / 503 97 71-01
T35, T35x (Ø 2.4 - 3.0 mm cord) 588 54 37-01 / 503 97 71-01
Alloy (Ø 2.0 - 3.3 mm cord) 588 54 37-01 / 503 97 71-01