Product Manual

B A TTER Y HANDLING
English – 5
• If the warning LED on the battery charger lights solid
red, there is a fault with the charger. Send the charger
to a Husqvarna service workshop.
(5)
Disposal of the batter y, battery charger
and machine
Symbols on the product or its pac kaging indicate that this
product cannot be handled as domestic waste. It must
instead be submitted to an appropriate recycling station
for the recovery of electrical and electronic equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
T echnical data
LED displa y
(Applies only
QC80F)
P ossible
faults
Possible action
Error LED is out
/ battery charger
doesn’t work
Blown fuse
Replace the blown
fuse with a new one.
Remove the screw
and split the plug and
change fuse.
Error LED
flashing
Temperature
deviation.
Use the battery
charger only when
the surrounding
temperature is
between 5
° C (41 ° F)
and 40
° C (104 ° F).
Error LED is lit
Cell difference
too much
(1V).
Contact your service
agent.
T echnical data
Batter y charger QC80 QC80F
Input Voltage, V 100-240 10-15
Power, W 100 95
Fuse, A 16
Batter y Cells (pcs) Ah Charging level
80% 100%
BLi10 10 2 50 min 70 min
BLi20 20 4 100 min 140 min
BLi80 10 2,1 50 min 70 min
BLi110 20 3 80 min 105 min
BLi150 20 4,2 110 min 140 min
BLi520x 70 14,4 7 hours
7.5
hours
BLi940x 90 26,1
13
hours
13.5
hours