Product Manual
Table Of Contents
- Symbols on the machine:
- Symbols in the operator’s manual:
- Contents
- Dear customer!
- Before using a new chain saw
- Important
- Always use common sense (2)
- Personal protective equipment
- Machine¢s safety equipment
- Chain brake and front hand guard
- Will my hand always activate the chain brake during a kickback?
- Will my inertia activated chain brake always activate during kickback in the event of a kickback?
- Will my chain brake always protect me from injury in the event of a kickback?
- Throttle trigger lockout
- Chain catcher
- Right hand guard
- Vibration damping system
- Stop switch
- Muffler
- Cutting equipment
- Fitting the bar and chain
- Fuel
- Fueling
- Fuel safety
- Starting and stopping
- Before use: (50)
- General working instructions
- How to avoid kickback
- General
- Carburetor adjustment
- Checking, maintaining and servicing chain saw safety equipment
- Muffler
- Starter housing
- Air filter
- Spark plug
- Needle bearing lubrication
- Cooling system
- ”Air Injection” centrifugal cleaning
- Winter use
- Troubleshooting schedule
- Maintenance schedule
- Technical data
- Guide bar and saw chain combinations
- Saw chain filing and file gauges
- Safety precautions for chain saw users
- YOUR WARRANTY RIGHTS AND OBLIGATIONS
- MANUFACTURER¢S WARRANTY COVERAGE
- OWNER¢S WARRANTY RESPONSIBILITIES
- WARRANTY COMMENCEMENT DATE
- LENGTH OF COVERAGE
- WHAT IS COVERED
- EMISSION WARRANTY PARTS LIST
- WHAT IS NOT COVERED
- HOW TO FILE A CLAIM
- WHERE TO GET WARRANTY SERVICE
- MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS
- MAINTENANCE STATEMENT
- Symboles sur la machine:
- Symboles dans le manuel:
- Sommaire
- Cher client,
- Mesures à prendre avant de mettre en usage une tronçonneuse neuve
- Important!
- Utilisez toujours votre bon sens (2)
- Équipement de protection personnelle
- Équipement de sécurité de la machine
- Frein de chaîne avec arceau protecteur
- Ma main active-t-elle toujours le frein de chaîne en cas de rebond?
- L’inertie du frein de chaîne est-elle toujours activée en cas de rebond?
- Le frein de chaîne me protège-t-il toujours des blessures en cas de rebond?
- Blocage de l’accélération
- Capteur de chaîne
- Protection de la main droite
- Système anti-vibrations
- Bouton d’arrêt
- Silencieux
- Équipement de coupe
- Montage du guide-chaîne et de la chaîne
- Carburant
- Remplissage de carburant
- Sécurité carburant
- Démarrage et arrêt
- Avant chaque utilisation: (50)
- Méthodes de travail
- Mesures anti-rebond
- Généralités
- Réglage du carburateur
- Contrôle, maintenance et entretien des équipements de sécurité de la tronçonneuse
- Silencieux
- Lanceur
- Filtre à air
- Bougie
- Graissage du roulement à aiguilles
- Système de refroidissement
- Épuration centrifuge ”Air Injection”
- Utilisation hivernale
- Plan de recherche de pannes
- Schéma d’entretien
- Caractéristiques techniques
- Combinaisons guide-chaîne et chaîne
- Affûtage de la chaîne et gabarits d’affûtage
- Consignes de sécurité pour les utilisateurs de tronçonneuses
- VOS DROITS ET OBLIGATIONS EN GARANTIE
- GARANTIE DU FABRICANT
- CHARGES DE LA GARANTIE DE L’UTILISATEUR
- DATE D’ENTRÉE EN VIGUEUR DE LA GARANTIE
- DURÉE DE LA GARANTIE
- CE QUI EST COUVERT PAR LA GARANTIE
- LISTE DES PIÈCES GARANTIE ÉMISSIONS
- CE QUI N’EST PAS COUVERT PAR LA GARANTIE
- DEMANDE D’INDEMNITÉ
- SERVICE APRÈS-VENTE
- ENTRETIEN, REMPLACEMENT ET RÉPARATION DES PIÈCES DU SYSTÈME DE LUTTE CONTRE LES ÉMISSIONS
- DÉCLARATION D’ENTRETIEN
- Símbolos en la máquina:
- Símbolos en el manual de instrucciones:
- Índice
- Apreciado cliente:
- Medidas a tomar antes de utilizar una motosierra nueva
- Importante
- Emplee siempre el sentido común (2)
- Equipo de protección personal
- Equipo de seguridad de la máquina
- Freno de cadena con protección contra reculadas
- ¿Activará siempre mi mano el freno de cadena en caso de reculada?
- ¿Se activa siempre por inercia el freno de cadena cuando se produce una reculada?
- ¿Me protegerá siempre el freno de cadena contra daños si se produce una reculada?
- Fiador del acelerador
- Captor de cadena
- Protección de la mano derecha
- Sistema amortiguador de vibraciones
- Botón de parada
- Silenciador
- Equipo de corte
- Montaje de la espada y la cadena
- Carburante
- Repostaje
- Seguridad en el uso del combustible
- Arranque y parada
- Antes de utilizar la máquina: (50)
- Instrucciones generales de trabajo
- Medidas preventivas de las reculadas
- Generalidades
- Ajuste del carburador
- Control, mantenimiento y servicio del equipo de seguridad de la motosierra
- Silenciador
- Mecanismo de arranque
- Filtro de aire
- Bujía
- Lubricación del cojinete de agujas
- Sistema refrigerante
- Depuración centrífuga ”Air Injection”
- Utilización en invierno
- Tabla de localización de fallos
- Programa de mantenimiento
- Datos técnicos
- Combinaciones de espada y cadena
- Afilado y calibres de afilado de la cadena de sierra
- Precauciones de seguridad para usuarios de motosierras
- SUS DERECHOS Y OBLIGACIONES DE GARANTIA
- ALCANCE DE LA GARANTIA DEL FABRICANTE
- RESPONSABILIDADES DE GARANTIA DEL PROPIETARIO
- FECHA DE INICIO DE LA GARANTIA
- DURACION DE LA GARANTIA
- ALCANCE DE LA GARANTIA
- LISTA DE PIEZAS DE LA GARANTÍA DE EMISIONES
- LO QUE NO ABARCA LA GARANTIA
- COMO HACER UNA RECLAMACION
- DONDE RECIBIR SERVICIO DE GARANTIA
- MANTENIMIENTO, SUSTITUCION Y REPARACION DE COMPONENTES RELACIONADOS CON EMISIONES
- DECLARACION DE MANTENIMIENTO
STARTING AND STOPPING
22 – English
1158605-49 Rev.2 2017-04-28
Starting and stopping
Starting
The chain brake should be activated when starting the
chain saw. Activate the chain brake by pushing the front
hand guard forwards.
(48)
Cold engine
Start position, 1:
Set the start/stop switch in the choke
position by pulling the red control outward - upward.
(44)
Air purge, 2:
Press the air purge diaphragm repeatedly
until fuel fills the diaphragm (at least 6 times). The
diaphragm need not be completely filled.
(44)
Grip the front handle with your left hand. Hold the chain
saw on the ground by placing your right foot through the
rear handle.
(45)
Pull the starter handle, 3:
Pull the starter handle with
your right hand and pull out the starter cord slowly until
you feel a resistance (as the starter pawls engage) then
pull firmly and rapidly until the engine fires.
Push down the red choke control, 4: As soon as the
engine fires which can be heard through a "puff" sound,
push down on the red choke control.
(47)
Pull the starter handle, 5:
Keep on pulling the cord
powerfully until the engine starts.
Warm engine
Start position, 1:
The correct choke/start throttle setting
for warm starting is obtained by initially moving the choke
control by pulling the red control outward - upwards.
(44)
Air purge, 2:
Press the air purge diaphragm repeatedly
until fuel fills the diaphragm (at least 6 times). The
diaphragm need not be completely filled.
(44)
Push down the red choke control, 4:
This inactivates
the choke, which is not needed when starting a warm
chain saw. However the movement of the start/stop switch
will have engaged a high idle, making warm starting
easier.
(47)
Pull the starter handle, 5: Grip the front handle with your
left hand. Hold the chain saw on the ground by placing
your right foot through the rear handle.
(45)
Pull the starter handle with your right hand and pull out
the starter cord slowly until you feel a resistance (as the
starter pawls engage) then pull firmly and rapidly until the
engine starts.
As the chain brake is still engaged the speed of the
engine m
ust be set to idling as soon as possible, this is
achieved by disengaging the throttle loc
k.
Disengagement is done by gently touching on the throttle
trigger. This prevents unnecessary wear to the clutch,
clutch drum and brake band. Allow the machine to idle a
few seconds before giving full throttle.
There is a simplified start reminder with illustrations to
descr
ibe each step on the rear edge of the saw (A).
(44)
CAUTION! Do not pull the starter cord all the way out and
do not let go of the starter handle when the cord is fully
extended. This can damage the machine.
Note! Pull the front hand guard towards the front
handle. The chain brake is now disengaged.
Your chain
saw is now ready for use.
(38)
• Never start a chain saw unless the bar, chain and all
covers are fitted correctly. See instructions under the
heading Assembly. Without a bar and chain attached
to the chain saw the clutch can come loose and cause
serious injury.
• The chain brake should be activated when starting.
See instr
uctions under the heading Start and stop. Do
not drop start.
This method is very dangerous
because you may lose control of the saw.
(48)
• Never start the machine indoors. Exhaust fumes can
be dangerous if inhaled.
• Observe your surroundings and make sure that there
is no risk of people or animals coming into contact
with the cutting equipment.
• Always hold the saw with both hands. The right hand
should be on the rear handle, and the left hand on the
front handle. All people, whether right or left handed,
should use this gr
ip. Use a firm grip with thumbs and
fingers encircling the chain saw handles.
• The chain brake is released by moving the front hand
guard mar
ked ”PULL BACK TO RESET” bac
k,
towards the front handle.
Stopping
Stop the engine by pushing the start/stop switch down.
(13)
CAUTION! The start/stop switch automatically returns to
run position. To avoid involuntary start up, the spark plug
cap must always be removed from the spark plug when
the machine is unsupervised.
(49)
!
WARNING! Note the following before
starting:
The chain brake must be engaged when
the chain saw is started to reduce the
chance of contact with the moving chain
during starting.
Never start a chain saw unless the bar,
chain and all covers are fitted correctly.
Otherwise the clutch can come loose and
cause personal injuries.
Place the machine on firm ground. Make
sure you have a secure footing and that
the chain cannot touch anything.
Keep people and animals well away from
the working area.
Never wrap the starter cord around your
hand.
!
WARNING! Long term inhalation of the
engine’s exhaust fumes, chain oil mist
and dust from sawdust can represent a
health risk.