Operating Guide

WORKING TECHNIQUES
English – 15
Safety instructions after completing work
• The transport guard should always be fitted to the
cutting attachment when the machine is not in use.
• Make sure the cutting attachment has stopped before
cleaning, carrying out repairs or an inspection.
Disconnect the battery.
• Always wear heavy-duty gloves when repairing the
cutting attachment.
The blades are very sharp and
can easily cause cuts.
• Store the machine out of reach of children.
• Use only original spare parts for repairs.
Basic working techniques
• Work with a swinging action from the bottom upwards
when trimming sides.
(Figure 21)
• When trimming a hedge the motor should always face
away from the hedge.
• Hold the machine as close to your body as possible to
get the best balance.
(Figure 20)
• Make sure that the tip does not touch the ground.
• Do not rush the work, but work steadily until all the
br
anches have been cut back cleanly.