Operating Guide

KEY T O SYMBOLS
220 – English
Symbols
W ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Hearing protection
• Approved eye protection
A breathing mask should be used
when there is a risk of dust.
Gloves should be worn when
necessary.
The blower can forcibly throw
objects that can bounce back.
This can result in serious eye
injuries if the recommended
safety equipment is not used.
The blower operator
must make sure that no
bystanders or animals
come nearer than 15
metres. Whenever
several operators are working in the same work area, they
should maintain a safe distance of at least 15 metres from
one another.
Severing of fingers or hand by fan
blade. Do not open or remove the
safety guards or nets while engine i
running.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
Switch off the engine b y moving the
stop switch to the STOP position
before carrying out any checks or
maintenance.
Always wear protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.