Operating Guide

CONTENTS
English
–
3
Contents Note the following before
starting:
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
Long-term exposure to noise can result in permanent
hearing impairment. So always use approved hearing
protection.
Please read the operator’s manual carefully and make
sure you understand the instructions before using the
machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please
refer to the operating instructions for the machine.
The machine is only designed for blowing lawns,
pathways, asphalt roads and the like.
KEY TO SYMBOLS
Symbols ................................................................ 2
CONTENTS
Contents ............................................................... 3
Note the following before starting: ........................ 3
WHAT IS WHAT?
What is what on the blower? ................................ 4
SAFETY INSTRUCTIONS
Personal protective equipment ............................. 5
General ................................................................. 6
WORKING TECHNIQUES
General working instructions ................................ 7
MAINTENANCE
General ................................................................. 9
Air intake screen ................................................... 9
Storage ................................................................. 9
Maintenance ......................................................... 9
TECHNICAL DATA
Technical data ...................................................... 10
EC Declaration of Conformity ............................... 10
!
WARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use original
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
WARNING! This accessory may only be
used together with the intended brush
cutter/trimmer, see under heading
”Approved accessories” in chapter
Technical data in the machine’s
Operator’s Manual.