Operating Guide

Contents
Introduction..................................................................... 2
Safety..............................................................................4
Assembly........................................................................ 9
Operation...................................................................... 11
Maintenance................................................................. 15
Troubleshooting............................................................ 23
Transportation, storage and disposal........................... 23
Technical data.............................................................. 24
Accessories.................................................................. 24
Warranty....................................................................... 26
Introduction
Intended use
The product is used for cutting branches and twigs.
Note: National or local regulations can regulate the use.
Comply to given regulations.
Only use the product with accessories that are approved
by the manufacturer. Refer to Accessories on page 24 .
Product overview
14
15
13
12
11
10
17
18
22
23
9
5
7
26
25
24
27
28
29
6
8
3
2
1
19
21
20
16
4
1. Saw chain
2. Guide bar
3. Bar nut
4. Protective guard for saw chain
5. Locking knob
6. Chain lubrication adjustment screw
7. Chain oil tank
8. Chain tensioning screw
9. Shaft
10. Front handle
11. Harness support hook
12. Stop switch
2 712 - 002 -