User Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Transportation, storage and disposal
- Technical data
- EC Declaration of Conformity
- Въведение
- Безопасност
- Дефиниции за безопасност
- Общи инструкции за безопасност
- Инструкции за безопасност за работа
- Инструкции за безопасност при техническо обслужване
- Монтаж
- Операция
- Поддръжка
- Отстраняване на проблеми
- Транспортиране, съхранение и изхвърляне
- Технически данни
- Декларация за съответствие на ЕО
- Úvod
- Bezpečnost
- Montáž
- Provoz
- Údržba
- Odstraňování problémů
- Přeprava, skladování a likvidace
- Technické údaje
- ES Prohlášení o shodě
- Indledning
- Sikkerhed
- Montering
- Drift
- Vedligeholdelse
- Fejlfinding
- Transport, opbevaring og bortskaffelse
- Tekniske data
- EU-overensstemmelseserklæring
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Wartung
- Fehlerbehebung
- Transport, Lagerung und Entsorgung
- Technische Angaben
- EG-Konformitätserklärung
- Εισαγωγή
- Ασφάλεια
- Συναρμολόγηση
- Λειτουργία
- Συντήρηση
- Αντιμετώπιση προβλημάτων
- Μεταφορά, αποθήκευση και απόρριψη
- Τεχνικά στοιχεία
- Δήλωση Συμμόρφωσης ΕΚ
- Introducción
- Seguridad
- Definiciones de seguridad
- Instrucciones generales de seguridad
- Instrucciones de seguridad para el funcionamiento
- Instrucciones de seguridad para el mantenimiento
- Montaje
- Funcionamiento
- Mantenimiento
- Resolución de problemas
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Declaración de conformidad CE
- Sissejuhatus
- Ohutus
- Kokkupanek
- Töö
- Hooldamine
- Veaotsing
- Transportimine, hoiulepanek ja utiliseerimine
- Tehnilised andmed
- EÜ vastavusdeklaratsioon
- Johdanto
- Turvallisuus
- Asentaminen
- Käyttö
- Huolto
- Vianmääritys
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- EY-vaatimustenmukaisuusvakuutus
- Introduction
- Sécurité
- Définitions de sécurité
- Instructions générales de sécurité
- Consignes de sécurité pour le fonctionnement
- Consignes de sécurité pour l'entretien
- Montage
- Utilisation
- Entretien
- Dépannage
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Déclaration de conformité CE
- Uvod
- Sigurnost
- Sastavljanje
- Rad
- Održavanje
- Rješavanje problema
- Prijevoz, spremanje i zbrinjavanje
- Tehnički podaci
- Izjava o sukladnosti EC
- Bevezető
- Biztonság
- Biztonsági meghatározások
- Általános biztonsági utasítások
- Biztonsági utasítások az üzemeltetéshez
- Biztonsági utasítások a karbantartáshoz
- Összeszerelés
- Üzemeltetés
- Karbantartás
- Hibaelhárítás
- Szállítás, tárolás és ártalmatlanítás
- Műszaki adatok
- EK megfelelőségi nyilatkozat
- Introduzione
- Sicurezza
- Montaggio
- Utilizzo
- Manutenzione
- Ricerca dei guasti
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Dichiarazione di conformità CE
- はじめに
- 安全性
- 組立
- 操作
- メンテナンス
- トラブルシューティング
- 搬送、保管、廃棄
- 主要諸元
- EC 適合性宣言
- Įvadas
- Sauga
- Surinkimas
- Naudojimas
- Techninė priežiūra
- Gedimai ir jų šalinimas
- Transportavimas, saugojimas ir utilizavimas
- Techniniai duomenys
- EB atitikties deklaracija
- Ievads
- Drošība
- Montāža
- Lietošana
- Apkope
- Problēmu novēršana
- Pārvadāšana, glabāšana un utilizēšana
- Tehniskie dati
- EK atbilstības deklarācija
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Probleemoplossing
- Vervoer, opslag en verwerking
- Technische gegevens
- EG verklaring van overeenstemming
- Innledning
- Sikkerhet
- Montering
- Drift
- Vedlikehold
- Feilsøking
- Transport, oppbevaring og avhending
- Tekniske data
- EF-samsvarserklæring
- Wstęp
- Bezpieczeństwo
- Definicje dotyczące bezpieczeństwa
- Ogólne zasady bezpieczeństwa
- Instrukcje bezpieczeństwa dotyczące obsługi
- Instrukcje bezpieczeństwa dotyczące konserwacji
- Montaż
- Przeznaczenie
- Przegląd
- Rozwiązywanie problemów
- Transport, przechowywanie i utylizacja
- Dane techniczne
- Deklaracja zgodności WE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Resolução de problemas
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Declaração CE de conformidade
- Introducere
- Siguranţă
- Definiții privind siguranța
- Instrucțiuni generale de siguranță
- Instrucțiuni de siguranță pentru utilizare
- Instrucțiuni de siguranță pentru întreținere
- Asamblarea
- Funcţionarea
- Întreținerea
- Depanarea
- Transportul, depozitarea şi eliminarea
- Date tehnice
- Declarație de conformitate CE
- Введение
- Безопасность
- Инструкции по технике безопасности
- Общие инструкции по технике безопасности
- Инструкции по безопасности во время эксплуатации
- Инструкции по технике безопасности во время технического обслуживания
- Сборка
- Эксплуатация
- Техническое обслуживание
- Поиск и устранение неисправностей
- Транспортировка, хранение и утилизация
- Технические данные
- Декларация соответствия ЕС
- Úvod
- Bezpečnosť
- Montáž
- Prevádzka
- Údržba
- Riešenie problémov
- Preprava, skladovanie a likvidácia
- Technické údaje
- ES vyhlásenie o zhode
- Uvod
- Varnost
- Montaža
- Delovanje
- Vzdrževanje
- Odpravljanje težav
- Transport skladiščenje in odstranitev
- Tehnični podatki
- Izjava ES o skladnosti
- Uvod
- Bezbednost
- Sklapanje
- Rukovanje
- Održavanje
- Rešavanje problema
- Transport, skladištenje i odlaganje
- Tehnički podaci
- EZ deklaracija o usaglašenosti
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Felsökning
- Transport, förvaring och kassering
- Tekniska data
- EG‐försäkran om överensstämmelse
- Giriş
- Güvenlik
- Montaj
- Kullanım
- Bakım
- Sorun giderme
- Taşıma, depolama ve atma
- Teknik veriler
- AT Uyumluluk Bildirimi
- Вступ
- Безпека
- Визначення щодо безпеки
- Загальні правила техніки безпеки
- Правила техніки безпеки під час використання
- Правила техніки безпеки під час обслуговування
- Збирання
- Експлуатація
- ТЕХНІЧНЕ ОБСЛУГОВУВАННЯ
- Усунення несправностей
- Транспортування, зберігання й утилізація
- Технічні характеристики
- Декларація відповідності ЄС
LED on the battery Possible faults Possible procedure
The error LED is on Cell difference too much (1V) Speak to an approved service agent.
Battery charger
LED on the battery
charger
Possible faults Possible procedure
The error LED flash-
es
The temperature in the work en-
vironment is too high or too low
Use the battery charger in temperatures between 5°C
and 40°C.
The error LED is on Speak to an approved service agent
Control panel
For problems, other than those in this section, speak to
your service agent.
Keypad Possible faults Possible action
Error LED flashes The motor is overloaded Increase the cutting height. See
To set the cutting
height on page 19
.
The motor speed drops too much,
and the motor stops
The motor control is too hot Stop the motor and wait until it has become cool
The blade is blocked To prevent accidental start turn the safety key to
0, remove the battery and wait a minimum 5 sec-
onds. Make sure that the blade can rotate freely. If
the problem continues, speak to an authorised
service agent
Battery error or no signal from battery Put the battery in the product correctly and exam-
ine the battery connector. If the error LED on the
battery flashes, see
Battery on page 22
.
The product stops The battery is weak Charge the battery. See
To charge the battery on
page 19
.
Battery connector failure Examine the battery connector
Transportation, storage and disposal
To set the product in transport position
1. Remove the grass catcher (if installed).
2. Loosen the knobs on the upper handle and fold the
handle down. (Fig. 63)
3. Loosen the lower knobs.
4. Move the knobs to the lower end of the grooves on
the left and the right side of the product. (Fig. 64)
5. Fold the handle forward. (Fig. 65)
Transportation
• The Dangerous Goods Legislation requirements
apply to the contained Li-ion batteries.
• For commercial transports special requirements on
package and labels must be obeyed.
• Make sure that you obey the regulations for
dangerous material when you prepare the product
for transport. Local regulations can apply.
• Always remove the battery for transport.
• Put tape on the battery connectors and make sure
that the battery cannot move around during
transport.
• Attach the product during transport.
Storage
• Always remove the battery for storage.
• To prevent accidents, make sure that the battery is
not connected to the product during storage.
919 - 003 - 23.10.2019 23