User Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Introduction
- Maintenance schedule
- To do a general inspection
- To clean the product externally
- To clean the inner surface of the cutting cover
- To examine the cutting equipment
- To replace the blade
- To do a check of the oil level
- To change the engine oil
- Air filter
- To examine the spark plug
- To examine the fuel system
- To adjust the clutch wire
- Transportation, storage and disposal
- Technical data
- EC Declaration of Conformity
- Въведение
- Безопасност
- Монтаж
- Експлоатация
- Поддръжка
- Въведение
- График за техническо обслужване
- За извършване на обща проверка
- За външно почистване на машината
- За почистване на вътрешната повърхност на капака на режещите части
- За проверка на режещото оборудване
- За сменяне на ножовете
- За проверка на нивото на маслото
- За смяна на моторното масло
- Въздушен филтър
- За проверка на запалителната свещ
- За проверка на горивната система
- За регулиране на кабела на съединителя
- Транспортиране, съхранение и изхвърляне
- Технически характеристики
- Декларация за съответствие на ЕО
- Úvod
- Bezpečnost
- Montáž
- Provoz
- Údržba
- Přeprava, skladování a likvidace
- Technické údaje
- ES Prohlášení o shodě
- Indledning
- Sikkerhed
- Montering
- Drift
- Vedligeholdelse
- Indledning
- Vedligeholdelsesskema
- Sådan udføres et generelt eftersyn
- Sådan rengøres produktet udvendigt
- Sådan rengøres indersiden af klippeskjoldet
- Sådan efterses skæreudstyret
- Sådan udskiftes klingen
- Sådan kontrolleres oliestanden
- Sådan skiftes motorolien
- Luftfilter
- Sådan undersøger du tændrøret
- Sådan undersøger du brændstofsystemet
- Sådan justeres koblingskablet
- Transport, opbevaring og bortskaffelse
- Tekniske data
- EU-overensstemmelseserklæring
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Wartung
- Einleitung
- Wartungsplan
- So führen Sie eine allgemeine Inspektion durch
- So reinigen Sie das Produkt außen
- So reinigen Sie die Innenseite der Schneidewerkabdeckung
- So prüfen Sie die Schneidausrüstung
- So tauschen Sie das Messer aus
- So prüfen Sie den Ölstand
- So wechseln Sie das Motoröl
- Luftfilter
- So überprüfen Sie die Zündkerze
- So prüfen Sie die Kraftstoffanlage
- So passen Sie das Kupplungsseil an
- Transport, Lagerung und Entsorgung
- Technische Angaben
- EG-Konformitätserklärung
- Εισαγωγή
- Ασφάλεια
- Συναρμολόγηση
- Λειτουργία
- Συντήρηση
- Εισαγωγή
- Πρόγραμμα συντήρησης
- Για να εκτελέσετε γενική επιθεώρηση
- Για να καθαρίσετε εξωτερικά το προϊόν
- Για να καθαρίσετε την εσωτερική επιφάνεια του καλύμματος κοπής
- Για να ελέγξετε τον εξοπλισμό κοπής
- Για να αντικαταστήσετε τη λεπίδα
- Έλεγχος της στάθμης λαδιού
- Αλλαγή του λαδιού του κινητήρα
- Φίλτρο αέρα
- Για να εξετάσετε το μπουζί
- Για να ελέγξετε το σύστημα καυσίμου
- Για να ρυθμίζετε την ντίζα του συμπλέκτη
- Μεταφορά, αποθήκευση και απόρριψη
- Τεχνικά στοιχεία
- Δήλωση Συμμόρφωσης ΕΚ
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Introducción
- Programa de mantenimiento
- Para realizar una inspección general
- Para limpiar el producto externamente
- Para limpiar la superficie interior de la cubierta de corte
- Para inspeccionar el equipo de corte
- Para sustituir la cuchilla
- Para realizar una comprobación del nivel de aceite
- Para cambiar el aceite del motor
- Filtro de aire
- Para examinar la bujía
- Para inspeccionar el sistema de combustible
- Para ajustar el cable de embrague
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Declaración CE de conformidad
- Sissejuhatus
- Ohutus
- Kokkupanek
- Töö
- Hooldamine
- Transportimine, hoiulepanek ja utiliseerimine
- Tehnilised andmed
- EÜ vastavusdeklaratsioon
- Johdanto
- Turvallisuus
- Asentaminen
- Toiminta
- Huolto
- Johdanto
- Huoltokaavio
- Yleistarkastus
- Laitteen puhdistaminen ulkopuolelta
- Leikkuusuojuksen sisäpinnan puhdistaminen
- Terävarustuksen tarkistaminen
- Terän vaihtaminen
- Öljyn määrän tarkistaminen
- Moottoriöljyn vaihtaminen
- Ilmansuodatin
- Sytytystulpan tarkistus
- Polttoainejärjestelmän tarkistaminen
- Kytkinjohdon säätäminen
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- EY-vaatimustenmukaisuusvakuutus
- Introduction
- Sécurité
- Montage
- Utilisation
- Maintenance
- Introduction
- Schéma d'entretien
- Pour faire une inspection générale
- Pour nettoyer la partie extérieure du produit
- Pour nettoyer la surface interne du capot de coupe
- Pour inspecter l'équipement de coupe
- Pour remplacer la lame
- Pour contrôler le niveau d'huile
- Pour vidanger l'huile moteur
- Filtre à air
- Pour vérifier la bougie
- Pour examiner le système de carburant
- Pour régler le câble d'embrayage
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Déclaration de conformité CE
- Uvod
- Sigurnost
- Sastavljanje
- Rad
- Održavanje
- Prijevoz, spremanje i zbrinjavanje
- Tehnički podaci
- Izjava o sukladnosti EC
- Bevezető
- Biztonság
- Összeszerelés
- Üzemeltetés
- Karbantartás
- Bevezető
- Karbantartási terv
- Általános ellenőrzés
- A termék külső tisztítása
- A vágóburkolat belső felületének tisztítása
- A vágószerkezet ellenőrzése
- A kés cseréje
- Az olajszint ellenőrzése
- A motorolaj cseréje
- Légszűrő
- A gyújtógyertya ellenőrzése.
- Az üzemanyagrendszer ellenőrzése
- A tengelykapcsoló bovden beállítása
- Szállítás, tárolás és ártalmatlanítás
- Műszaki adatok
- EK megfelelőségi nyilatkozat
- Introduzione
- Sicurezza
- Montaggio
- Utilizzo
- Manutenzione
- Introduzione
- Programma di manutenzione
- Per effettuare un'ispezione generale
- Per pulire esternamente il prodotto
- Per pulire la superficie interna del coperchio di taglio
- Per controllare l’attrezzatura di taglio
- Per sostituire la lama
- Per eseguire il controllo del livello dell’olio
- Per sostituire l’olio motore
- Filtro dell’aria
- Per esaminare la candela
- Per controllare il sistema di alimentazione
- Per regolare il filo della frizione
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Dichiarazione CE di conformità
- Įvadas
- Sauga
- Surinkimas
- Naudojimas
- Priežiūra
- Transportavimas, saugojimas ir utilizavimas
- Techniniai duomenys
- EB atitikties deklaracija
- Ievads
- Drošība
- Montāža
- Lietošana
- Tehniskā apkope
- Pārvadāšana, glabāšana un utilizēšana
- Tehniskie dati
- EK atbilstības deklarācija
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Vervoer, opslag en verwerking
- Technische gegevens
- EG-conformiteitsverklaring
- Innledning
- Sikkerhet
- Montering
- Bruk
- Vedlikehold
- Innledning
- Vedlikeholdsskjema
- Slik utfører du en generell inspeksjon
- Slik rengjør du produktet på utsiden
- Slik rengjør du den indre overflaten av klippedekselet
- Slik kontrollerer du skjæreutstyret
- Slik bytter du kniven
- Slik kontrollerer du oljenivået
- Slik skifter du motorolje
- Luftfilter
- Kontrollere tennpluggen
- Slik undersøker du drivstoffsystemet
- Slik justerer du clutchvaieren
- Transport, oppbevaring og avhending
- Tekniske data
- EF-samsvarserklæring
- Wstęp
- Bezpieczeństwo
- Montaż
- Obsługa
- Konserwacja
- Wstęp
- Plan konserwacji
- Przegląd ogólny
- Czyszczenie maszyny od zewnątrz
- Czyszczenie powierzchni wewnętrznych osłony osprzętu tnącego.
- Kontrola osprzętu tnącego
- Wymiana ostrza
- Kontrola poziomu oleju
- Wymiana oleju silnikowego
- Filtr powietrza
- Sprawdzanie świecy zapłonowej
- Kontrolowanie instalacji paliwowej
- Regulacja linki sprzęgła
- Transport, przechowywanie i utylizacja
- Dane techniczne
- Deklaracja zgodności WE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Introdução
- Esquema de manutenção
- Para efetuar uma inspeção geral
- Para limpar o produto externamente
- Para limpar a superfície interior da cobertura de corte
- Para examinar o equipamento de corte
- Para substituir a lâmina
- Para verificar o nível do óleo
- Para mudar o óleo de motor
- Filtro de ar
- Examinar a vela de ignição
- Para examinar o sistema de combustível
- Para ajustar o cabo de embraiagem
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Declaração CE de conformidade
- Introducere
- Siguranţă
- Asamblarea
- Operation (Funcționare)
- Întreţinerea
- Introducere
- Program de întreținere
- Pentru a efectua o inspecție generală
- Pentru a curăța produsul la exterior
- Pentru a curăța suprafața interioară a capacului de tăiere
- Pentru a examina echipamentul de tăiere
- Pentru a înlocui lama
- Pentru a verifica nivelul de ulei
- Pentru a schimba uleiul de motor
- Filtru de aer
- Pentru a verifica bujia
- Pentru a examina sistemul de alimentare cu carburant
- Pentru a regla cablul de ambreiaj
- Transportul, depozitarea şi eliminarea
- Date tehnice
- Declarație de conformitate CE
- Введение
- Безопасность
- Сборка
- Эксплуатация
- Техническое обслуживание
- Введение
- График технического обслуживания
- Выполнение общего осмотра
- Очистка изделия снаружи
- Очистка внутренней поверхности режущей деки
- Проверка режущего оборудования
- Замена ножа
- Проверка уровня масла
- Замена моторного масла
- Воздушный фильтр
- Проверка свечи зажигания
- Проверка топливной системы
- Регулировка троса сцепления
- Транспортировка, хранение и утилизация
- Технические данные
- Декларация соответствия ЕС
- Úvod
- Bezpečnosť
- Montáž
- Prevádzka
- Údržba
- Úvod
- Plán údržby
- Vykonanie všeobecnej kontroly
- Čistenie externých povrchov výrobku
- Čistenie vnútorného povrchu krytu rezacej časti
- Kontrola rezného zariadenia
- Výmena noža
- Kontrola hladiny oleja
- Výmena motorového oleja
- Vzduchový filter
- Kontrola zapaľovacej sviečky
- Kontrola palivového systému
- Nastavenie lanka spojky
- Preprava, skladovanie a likvidácia
- Technické údaje
- ES vyhlásenie o zhode
- Uvod
- Varnost
- Montaža
- Delovanje
- Vzdrževanje
- Uvod
- Urnik vzdrževanja
- Izvajanje splošnih pregledov
- Kako čistiti zunanjost izdelka
- Kako očistiti notranjo površino pokrova rezila
- Kako pregledati rezalno opremo
- Zamenjava rezil
- Kako preveriti nivo olja
- Kako zamenjati motorno olje
- Zračni filter
- Pregled svečke
- Kako pregledati sistem za gorivo
- Kako nastaviti žico sklopke
- Transport skladiščenje in odstranitev
- Tehnični podatki
- Izjava ES o skladnosti
- Uvod
- Bezbednost
- Sklapanje
- Rukovanje
- Održavanje
- Transport, skladištenje i odlaganje
- Tehnički podaci
- EZ deklaracija o usaglašenosti
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Transport, förvaring och kassering
- Tekniska data
- EG‐försäkran om överensstämmelse
- Giriş
- Güvenlik
- Montaj
- Kullanım
- Bakım
- Taşıma, depolama ve atma
- Teknik veriler
- AT Uyumluluk Bildirimi
- Вступ
- Безпека
- Збирання
- ЕКСПЛУАТАЦІЯ
- ТЕХНІЧНЕ ОБСЛУГОВУВАННЯ
- Вступ
- Графік технічного обслуговування
- Процедура загальної перевірки
- Чищення зовнішніх поверхонь виробу
- Чищення внутрішніх поверхонь кожуха леза
- Перевірка різального обладнання
- Заміна ножа
- Перевірка рівня оливи
- Заміна моторної оливи
- Повітряний фільтр
- Перевірка свічки запалювання
- Перевірка паливної системи
- Регулювання дроту зчеплення
- Транспортування, зберігання та утилізація
- Технічні дані
- Декларація відповідності ЄС
2. Look at the blade to see if it is damaged or blunt.
Note: It is necessary to balance the blade after it is
sharpened. Let a service center sharpen, replace and
balance the blade. If you hit an obstacle that causes the
product to stop, replace the damaged blade. Let the
service center estimate if the blade can be sharpened or
must be replaced.
To replace the blade
1. Lock the blade with a block of wood.(Fig. 30 )
2. Remove the blade bolt.
3. Remove the blade.
4. Examine the blade support and blade bolt to see if
there are damages.
5. Examine the engine shaft to make sure that it is not
bent.
6. When you attach the new blade, point the angled
ends of the blade in the direction of the cutting cover.
(Fig. 31 )
7. Make sure that the blade is aligned with the center of
the engine shaft.
8. Lock the blade with a block of wood. Attach the
spring washer and tighten the bolt and washer with a
torque of 45–60 Nm.(Fig. 32 )
9. Pull the blade around by hand and make sure that it
turns freely.
WARNING: Use heavy duty gloves. The
blade is very sharp and cuts can easily
occur.
10. Start the product to do a test of the blade. If the
blade is not correctly attached, there is vibration in
the product or the cutting result is unsatisfactory.
To do a check of the oil level
CAUTION: A too low oil level can do
damage to the engine. Do a check of the oil
level before you start the product.
1. Put the product on level ground.
2. Remove the oil tank cap with the attached dipstick.
3. Clean the oil from the dipstick.
4. Put the dipstick fully into the oil tank to give a correct
picture of the oil level.
5. Remove the dipstick.
6. Examine the oil level on the dipstick.
7. If the oil level is low, fill with engine oil and do a
check of the oil level again.
To change the engine oil
WARNING: Engine oil is very hot directly
after the engine is stopped. Let the engine
become cool before you drain the engine oil.
If you spill engine oil on your skin, clean with
soap and water.
1. Operate the product until the fuel tank is empty.
2. Remove the ignition cable from the spark plug.
3. Remove the oil tank cap.
4. Put a container below the product to collect the
engine oil in.
5. Tilt the product to drain the engine oil from the oil
tank.
6. Fill with new engine oil of the type recommended in
Technical data on page 13
.
7. Do a check of the oil level. See
To do a check of the
oil level on page 12
.
Air filter
An air filter that is used for a long time cannot be fully
cleaned. Replace the air filter at regular intervals.
Note: Always replace a damaged air filter.
To clean the foam plastic filter
1. Remove the air filter cover and remove the foam
plastic filter.
2. Clean the foam plastic filter with soap and water.
3. Flush the foam plastic filter in clean water.
4. Squeeze the water from the foam plastic filter and let
it dry.
CAUTION:
Do not use compressed air. It
can cause damage to the foam plastic
filter.
5. Lubricate the foam plastic filter with engine oil.
6. Press a clean cloth against the foam plastic filter to
remove unwanted oil.
7. Put the air filter back. Make sure that the air filter
fully seals against the air filter holder.
8. Put the air filter cover back.
To examine the spark plug
CAUTION: Always use the recommended
spark plug type. Incorrect spark plug type
can cause damage to the product.
• Examine the spark plug if the engine is low on
power, is not easy to start or does not operate
correctly at idle speed.
• To decrease the risk of unwanted material on the
spark plug electrodes, obey these instructions:
12
801 - 001 - 11.06.2018