User Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Introduction
- Maintenance schedule
- To do a general inspection
- To clean the product externally
- To clean the inner surface of the cutting cover
- To examine the cutting equipment
- To replace the blade
- To do a check of the oil level
- To change the engine oil
- Air filter
- To examine the spark plug
- To examine the fuel system
- To adjust the clutch wire
- Transportation, storage and disposal
- Technical data
- EC Declaration of Conformity
- Въведение
- Безопасност
- Монтаж
- Експлоатация
- Поддръжка
- Въведение
- График за техническо обслужване
- За извършване на обща проверка
- За външно почистване на машината
- За почистване на вътрешната повърхност на капака на режещите части
- За проверка на режещото оборудване
- За сменяне на ножовете
- За проверка на нивото на маслото
- За смяна на моторното масло
- Въздушен филтър
- За проверка на запалителната свещ
- За проверка на горивната система
- За регулиране на кабела на съединителя
- Транспортиране, съхранение и изхвърляне
- Технически характеристики
- Декларация за съответствие на ЕО
- Úvod
- Bezpečnost
- Montáž
- Provoz
- Údržba
- Přeprava, skladování a likvidace
- Technické údaje
- ES Prohlášení o shodě
- Indledning
- Sikkerhed
- Montering
- Drift
- Vedligeholdelse
- Indledning
- Vedligeholdelsesskema
- Sådan udføres et generelt eftersyn
- Sådan rengøres produktet udvendigt
- Sådan rengøres indersiden af klippeskjoldet
- Sådan efterses skæreudstyret
- Sådan udskiftes klingen
- Sådan kontrolleres oliestanden
- Sådan skiftes motorolien
- Luftfilter
- Sådan undersøger du tændrøret
- Sådan undersøger du brændstofsystemet
- Sådan justeres koblingskablet
- Transport, opbevaring og bortskaffelse
- Tekniske data
- EU-overensstemmelseserklæring
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Wartung
- Einleitung
- Wartungsplan
- So führen Sie eine allgemeine Inspektion durch
- So reinigen Sie das Produkt außen
- So reinigen Sie die Innenseite der Schneidewerkabdeckung
- So prüfen Sie die Schneidausrüstung
- So tauschen Sie das Messer aus
- So prüfen Sie den Ölstand
- So wechseln Sie das Motoröl
- Luftfilter
- So überprüfen Sie die Zündkerze
- So prüfen Sie die Kraftstoffanlage
- So passen Sie das Kupplungsseil an
- Transport, Lagerung und Entsorgung
- Technische Angaben
- EG-Konformitätserklärung
- Εισαγωγή
- Ασφάλεια
- Συναρμολόγηση
- Λειτουργία
- Συντήρηση
- Εισαγωγή
- Πρόγραμμα συντήρησης
- Για να εκτελέσετε γενική επιθεώρηση
- Για να καθαρίσετε εξωτερικά το προϊόν
- Για να καθαρίσετε την εσωτερική επιφάνεια του καλύμματος κοπής
- Για να ελέγξετε τον εξοπλισμό κοπής
- Για να αντικαταστήσετε τη λεπίδα
- Έλεγχος της στάθμης λαδιού
- Αλλαγή του λαδιού του κινητήρα
- Φίλτρο αέρα
- Για να εξετάσετε το μπουζί
- Για να ελέγξετε το σύστημα καυσίμου
- Για να ρυθμίζετε την ντίζα του συμπλέκτη
- Μεταφορά, αποθήκευση και απόρριψη
- Τεχνικά στοιχεία
- Δήλωση Συμμόρφωσης ΕΚ
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Introducción
- Programa de mantenimiento
- Para realizar una inspección general
- Para limpiar el producto externamente
- Para limpiar la superficie interior de la cubierta de corte
- Para inspeccionar el equipo de corte
- Para sustituir la cuchilla
- Para realizar una comprobación del nivel de aceite
- Para cambiar el aceite del motor
- Filtro de aire
- Para examinar la bujía
- Para inspeccionar el sistema de combustible
- Para ajustar el cable de embrague
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Declaración CE de conformidad
- Sissejuhatus
- Ohutus
- Kokkupanek
- Töö
- Hooldamine
- Transportimine, hoiulepanek ja utiliseerimine
- Tehnilised andmed
- EÜ vastavusdeklaratsioon
- Johdanto
- Turvallisuus
- Asentaminen
- Toiminta
- Huolto
- Johdanto
- Huoltokaavio
- Yleistarkastus
- Laitteen puhdistaminen ulkopuolelta
- Leikkuusuojuksen sisäpinnan puhdistaminen
- Terävarustuksen tarkistaminen
- Terän vaihtaminen
- Öljyn määrän tarkistaminen
- Moottoriöljyn vaihtaminen
- Ilmansuodatin
- Sytytystulpan tarkistus
- Polttoainejärjestelmän tarkistaminen
- Kytkinjohdon säätäminen
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- EY-vaatimustenmukaisuusvakuutus
- Introduction
- Sécurité
- Montage
- Utilisation
- Maintenance
- Introduction
- Schéma d'entretien
- Pour faire une inspection générale
- Pour nettoyer la partie extérieure du produit
- Pour nettoyer la surface interne du capot de coupe
- Pour inspecter l'équipement de coupe
- Pour remplacer la lame
- Pour contrôler le niveau d'huile
- Pour vidanger l'huile moteur
- Filtre à air
- Pour vérifier la bougie
- Pour examiner le système de carburant
- Pour régler le câble d'embrayage
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Déclaration de conformité CE
- Uvod
- Sigurnost
- Sastavljanje
- Rad
- Održavanje
- Prijevoz, spremanje i zbrinjavanje
- Tehnički podaci
- Izjava o sukladnosti EC
- Bevezető
- Biztonság
- Összeszerelés
- Üzemeltetés
- Karbantartás
- Bevezető
- Karbantartási terv
- Általános ellenőrzés
- A termék külső tisztítása
- A vágóburkolat belső felületének tisztítása
- A vágószerkezet ellenőrzése
- A kés cseréje
- Az olajszint ellenőrzése
- A motorolaj cseréje
- Légszűrő
- A gyújtógyertya ellenőrzése.
- Az üzemanyagrendszer ellenőrzése
- A tengelykapcsoló bovden beállítása
- Szállítás, tárolás és ártalmatlanítás
- Műszaki adatok
- EK megfelelőségi nyilatkozat
- Introduzione
- Sicurezza
- Montaggio
- Utilizzo
- Manutenzione
- Introduzione
- Programma di manutenzione
- Per effettuare un'ispezione generale
- Per pulire esternamente il prodotto
- Per pulire la superficie interna del coperchio di taglio
- Per controllare l’attrezzatura di taglio
- Per sostituire la lama
- Per eseguire il controllo del livello dell’olio
- Per sostituire l’olio motore
- Filtro dell’aria
- Per esaminare la candela
- Per controllare il sistema di alimentazione
- Per regolare il filo della frizione
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Dichiarazione CE di conformità
- Įvadas
- Sauga
- Surinkimas
- Naudojimas
- Priežiūra
- Transportavimas, saugojimas ir utilizavimas
- Techniniai duomenys
- EB atitikties deklaracija
- Ievads
- Drošība
- Montāža
- Lietošana
- Tehniskā apkope
- Pārvadāšana, glabāšana un utilizēšana
- Tehniskie dati
- EK atbilstības deklarācija
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Vervoer, opslag en verwerking
- Technische gegevens
- EG-conformiteitsverklaring
- Innledning
- Sikkerhet
- Montering
- Bruk
- Vedlikehold
- Innledning
- Vedlikeholdsskjema
- Slik utfører du en generell inspeksjon
- Slik rengjør du produktet på utsiden
- Slik rengjør du den indre overflaten av klippedekselet
- Slik kontrollerer du skjæreutstyret
- Slik bytter du kniven
- Slik kontrollerer du oljenivået
- Slik skifter du motorolje
- Luftfilter
- Kontrollere tennpluggen
- Slik undersøker du drivstoffsystemet
- Slik justerer du clutchvaieren
- Transport, oppbevaring og avhending
- Tekniske data
- EF-samsvarserklæring
- Wstęp
- Bezpieczeństwo
- Montaż
- Obsługa
- Konserwacja
- Wstęp
- Plan konserwacji
- Przegląd ogólny
- Czyszczenie maszyny od zewnątrz
- Czyszczenie powierzchni wewnętrznych osłony osprzętu tnącego.
- Kontrola osprzętu tnącego
- Wymiana ostrza
- Kontrola poziomu oleju
- Wymiana oleju silnikowego
- Filtr powietrza
- Sprawdzanie świecy zapłonowej
- Kontrolowanie instalacji paliwowej
- Regulacja linki sprzęgła
- Transport, przechowywanie i utylizacja
- Dane techniczne
- Deklaracja zgodności WE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Introdução
- Esquema de manutenção
- Para efetuar uma inspeção geral
- Para limpar o produto externamente
- Para limpar a superfície interior da cobertura de corte
- Para examinar o equipamento de corte
- Para substituir a lâmina
- Para verificar o nível do óleo
- Para mudar o óleo de motor
- Filtro de ar
- Examinar a vela de ignição
- Para examinar o sistema de combustível
- Para ajustar o cabo de embraiagem
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Declaração CE de conformidade
- Introducere
- Siguranţă
- Asamblarea
- Operation (Funcționare)
- Întreţinerea
- Introducere
- Program de întreținere
- Pentru a efectua o inspecție generală
- Pentru a curăța produsul la exterior
- Pentru a curăța suprafața interioară a capacului de tăiere
- Pentru a examina echipamentul de tăiere
- Pentru a înlocui lama
- Pentru a verifica nivelul de ulei
- Pentru a schimba uleiul de motor
- Filtru de aer
- Pentru a verifica bujia
- Pentru a examina sistemul de alimentare cu carburant
- Pentru a regla cablul de ambreiaj
- Transportul, depozitarea şi eliminarea
- Date tehnice
- Declarație de conformitate CE
- Введение
- Безопасность
- Сборка
- Эксплуатация
- Техническое обслуживание
- Введение
- График технического обслуживания
- Выполнение общего осмотра
- Очистка изделия снаружи
- Очистка внутренней поверхности режущей деки
- Проверка режущего оборудования
- Замена ножа
- Проверка уровня масла
- Замена моторного масла
- Воздушный фильтр
- Проверка свечи зажигания
- Проверка топливной системы
- Регулировка троса сцепления
- Транспортировка, хранение и утилизация
- Технические данные
- Декларация соответствия ЕС
- Úvod
- Bezpečnosť
- Montáž
- Prevádzka
- Údržba
- Úvod
- Plán údržby
- Vykonanie všeobecnej kontroly
- Čistenie externých povrchov výrobku
- Čistenie vnútorného povrchu krytu rezacej časti
- Kontrola rezného zariadenia
- Výmena noža
- Kontrola hladiny oleja
- Výmena motorového oleja
- Vzduchový filter
- Kontrola zapaľovacej sviečky
- Kontrola palivového systému
- Nastavenie lanka spojky
- Preprava, skladovanie a likvidácia
- Technické údaje
- ES vyhlásenie o zhode
- Uvod
- Varnost
- Montaža
- Delovanje
- Vzdrževanje
- Uvod
- Urnik vzdrževanja
- Izvajanje splošnih pregledov
- Kako čistiti zunanjost izdelka
- Kako očistiti notranjo površino pokrova rezila
- Kako pregledati rezalno opremo
- Zamenjava rezil
- Kako preveriti nivo olja
- Kako zamenjati motorno olje
- Zračni filter
- Pregled svečke
- Kako pregledati sistem za gorivo
- Kako nastaviti žico sklopke
- Transport skladiščenje in odstranitev
- Tehnični podatki
- Izjava ES o skladnosti
- Uvod
- Bezbednost
- Sklapanje
- Rukovanje
- Održavanje
- Transport, skladištenje i odlaganje
- Tehnički podaci
- EZ deklaracija o usaglašenosti
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Transport, förvaring och kassering
- Tekniska data
- EG‐försäkran om överensstämmelse
- Giriş
- Güvenlik
- Montaj
- Kullanım
- Bakım
- Taşıma, depolama ve atma
- Teknik veriler
- AT Uyumluluk Bildirimi
- Вступ
- Безпека
- Збирання
- ЕКСПЛУАТАЦІЯ
- ТЕХНІЧНЕ ОБСЛУГОВУВАННЯ
- Вступ
- Графік технічного обслуговування
- Процедура загальної перевірки
- Чищення зовнішніх поверхонь виробу
- Чищення внутрішніх поверхонь кожуха леза
- Перевірка різального обладнання
- Заміна ножа
- Перевірка рівня оливи
- Заміна моторної оливи
- Повітряний фільтр
- Перевірка свічки запалювання
- Перевірка паливної системи
- Регулювання дроту зчеплення
- Транспортування, зберігання та утилізація
- Технічні дані
- Декларація відповідності ЄС
a) Make sure that the idle speed is correctly
adjusted.
b) Make sure that the fuel mixture is correct.
c) Make sure that the air filter is clean.
• If the spark plug is dirty, clean it and make sure that
the electrode gap is correct, see
Technical data on
page 13
.(Fig. 33 )
• Replace the spark plug if it is necessary.
To examine the fuel system
• Examine the fuel tank cap and the seal for the fuel
tank cap to make sure that there are no damages.
• Examine the fuel hose to make sure that there are
no leaks. If the fuel hose is damaged, let a service
agent replace it.
To adjust the clutch wire
If the drive feels slow, it is necessary to adjust the clutch
wire.
1. Attach the clutch wire in different holes on the drive
bail to adjust the length of the clutch wire. Decrease
the length of the clutch wire to increase the drive
speed. Extend the clutch wire to decrease the drive
speed.(Fig. 34 )
Note: If the drive is engaged when you do not pull
the drive bail, it is necessary to extend the clutch
wire.
2. For small adjustment of the drive speed, turn the
adjuster screw. To increase the drive speed, turn the
adjuster screw counterclockwise. To decrease the
drive speed, turn the adjustment screw clockwise.
(Fig. 35 )
If the drive feels slow also after the adjustment, let an
approved service agent replace the drive belt.
Transportation, storage and disposal
Transportation and storage
• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel tank before you put the product in
storage for a long period of time. Discard the fuel at
an applicable disposal location
• Safely attach the product during transportation to
prevent damage and accidents.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
• Keep the product in a dry and frost free area.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
• When the product is no longer in use, send it to a
Husqvarna dealer or discard it at a recycling
location.
Technical data
Technical data
LC 140 LC 140S
Engine
Brand Briggs & Stratton Briggs & Stratton
Displacement, cm
3
125 125
Speed, rpm 2900±100 2900±100
Nominal engine output, kW
1
1.8 1.8
1
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
801 - 001 - 11.06.2018 13