User Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Introduction
- Maintenance schedule
- To do a general inspection
- To clean the product externally
- To clean the inner surface of the cutting cover
- To examine the cutting equipment
- To replace the blade
- To do a check of the oil level
- To change the engine oil
- Air filter
- To examine the spark plug
- To examine the fuel system
- To adjust the clutch wire
- Transportation, storage and disposal
- Technical data
- EC Declaration of Conformity
- Въведение
- Безопасност
- Монтаж
- Експлоатация
- Поддръжка
- Въведение
- График за техническо обслужване
- За извършване на обща проверка
- За външно почистване на машината
- За почистване на вътрешната повърхност на капака на режещите части
- За проверка на режещото оборудване
- За сменяне на ножовете
- За проверка на нивото на маслото
- За смяна на моторното масло
- Въздушен филтър
- За проверка на запалителната свещ
- За проверка на горивната система
- За регулиране на кабела на съединителя
- Транспортиране, съхранение и изхвърляне
- Технически характеристики
- Декларация за съответствие на ЕО
- Úvod
- Bezpečnost
- Montáž
- Provoz
- Údržba
- Přeprava, skladování a likvidace
- Technické údaje
- ES Prohlášení o shodě
- Indledning
- Sikkerhed
- Montering
- Drift
- Vedligeholdelse
- Indledning
- Vedligeholdelsesskema
- Sådan udføres et generelt eftersyn
- Sådan rengøres produktet udvendigt
- Sådan rengøres indersiden af klippeskjoldet
- Sådan efterses skæreudstyret
- Sådan udskiftes klingen
- Sådan kontrolleres oliestanden
- Sådan skiftes motorolien
- Luftfilter
- Sådan undersøger du tændrøret
- Sådan undersøger du brændstofsystemet
- Sådan justeres koblingskablet
- Transport, opbevaring og bortskaffelse
- Tekniske data
- EU-overensstemmelseserklæring
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Wartung
- Einleitung
- Wartungsplan
- So führen Sie eine allgemeine Inspektion durch
- So reinigen Sie das Produkt außen
- So reinigen Sie die Innenseite der Schneidewerkabdeckung
- So prüfen Sie die Schneidausrüstung
- So tauschen Sie das Messer aus
- So prüfen Sie den Ölstand
- So wechseln Sie das Motoröl
- Luftfilter
- So überprüfen Sie die Zündkerze
- So prüfen Sie die Kraftstoffanlage
- So passen Sie das Kupplungsseil an
- Transport, Lagerung und Entsorgung
- Technische Angaben
- EG-Konformitätserklärung
- Εισαγωγή
- Ασφάλεια
- Συναρμολόγηση
- Λειτουργία
- Συντήρηση
- Εισαγωγή
- Πρόγραμμα συντήρησης
- Για να εκτελέσετε γενική επιθεώρηση
- Για να καθαρίσετε εξωτερικά το προϊόν
- Για να καθαρίσετε την εσωτερική επιφάνεια του καλύμματος κοπής
- Για να ελέγξετε τον εξοπλισμό κοπής
- Για να αντικαταστήσετε τη λεπίδα
- Έλεγχος της στάθμης λαδιού
- Αλλαγή του λαδιού του κινητήρα
- Φίλτρο αέρα
- Για να εξετάσετε το μπουζί
- Για να ελέγξετε το σύστημα καυσίμου
- Για να ρυθμίζετε την ντίζα του συμπλέκτη
- Μεταφορά, αποθήκευση και απόρριψη
- Τεχνικά στοιχεία
- Δήλωση Συμμόρφωσης ΕΚ
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Introducción
- Programa de mantenimiento
- Para realizar una inspección general
- Para limpiar el producto externamente
- Para limpiar la superficie interior de la cubierta de corte
- Para inspeccionar el equipo de corte
- Para sustituir la cuchilla
- Para realizar una comprobación del nivel de aceite
- Para cambiar el aceite del motor
- Filtro de aire
- Para examinar la bujía
- Para inspeccionar el sistema de combustible
- Para ajustar el cable de embrague
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Declaración CE de conformidad
- Sissejuhatus
- Ohutus
- Kokkupanek
- Töö
- Hooldamine
- Transportimine, hoiulepanek ja utiliseerimine
- Tehnilised andmed
- EÜ vastavusdeklaratsioon
- Johdanto
- Turvallisuus
- Asentaminen
- Toiminta
- Huolto
- Johdanto
- Huoltokaavio
- Yleistarkastus
- Laitteen puhdistaminen ulkopuolelta
- Leikkuusuojuksen sisäpinnan puhdistaminen
- Terävarustuksen tarkistaminen
- Terän vaihtaminen
- Öljyn määrän tarkistaminen
- Moottoriöljyn vaihtaminen
- Ilmansuodatin
- Sytytystulpan tarkistus
- Polttoainejärjestelmän tarkistaminen
- Kytkinjohdon säätäminen
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- EY-vaatimustenmukaisuusvakuutus
- Introduction
- Sécurité
- Montage
- Utilisation
- Maintenance
- Introduction
- Schéma d'entretien
- Pour faire une inspection générale
- Pour nettoyer la partie extérieure du produit
- Pour nettoyer la surface interne du capot de coupe
- Pour inspecter l'équipement de coupe
- Pour remplacer la lame
- Pour contrôler le niveau d'huile
- Pour vidanger l'huile moteur
- Filtre à air
- Pour vérifier la bougie
- Pour examiner le système de carburant
- Pour régler le câble d'embrayage
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Déclaration de conformité CE
- Uvod
- Sigurnost
- Sastavljanje
- Rad
- Održavanje
- Prijevoz, spremanje i zbrinjavanje
- Tehnički podaci
- Izjava o sukladnosti EC
- Bevezető
- Biztonság
- Összeszerelés
- Üzemeltetés
- Karbantartás
- Bevezető
- Karbantartási terv
- Általános ellenőrzés
- A termék külső tisztítása
- A vágóburkolat belső felületének tisztítása
- A vágószerkezet ellenőrzése
- A kés cseréje
- Az olajszint ellenőrzése
- A motorolaj cseréje
- Légszűrő
- A gyújtógyertya ellenőrzése.
- Az üzemanyagrendszer ellenőrzése
- A tengelykapcsoló bovden beállítása
- Szállítás, tárolás és ártalmatlanítás
- Műszaki adatok
- EK megfelelőségi nyilatkozat
- Introduzione
- Sicurezza
- Montaggio
- Utilizzo
- Manutenzione
- Introduzione
- Programma di manutenzione
- Per effettuare un'ispezione generale
- Per pulire esternamente il prodotto
- Per pulire la superficie interna del coperchio di taglio
- Per controllare l’attrezzatura di taglio
- Per sostituire la lama
- Per eseguire il controllo del livello dell’olio
- Per sostituire l’olio motore
- Filtro dell’aria
- Per esaminare la candela
- Per controllare il sistema di alimentazione
- Per regolare il filo della frizione
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Dichiarazione CE di conformità
- Įvadas
- Sauga
- Surinkimas
- Naudojimas
- Priežiūra
- Transportavimas, saugojimas ir utilizavimas
- Techniniai duomenys
- EB atitikties deklaracija
- Ievads
- Drošība
- Montāža
- Lietošana
- Tehniskā apkope
- Pārvadāšana, glabāšana un utilizēšana
- Tehniskie dati
- EK atbilstības deklarācija
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Vervoer, opslag en verwerking
- Technische gegevens
- EG-conformiteitsverklaring
- Innledning
- Sikkerhet
- Montering
- Bruk
- Vedlikehold
- Innledning
- Vedlikeholdsskjema
- Slik utfører du en generell inspeksjon
- Slik rengjør du produktet på utsiden
- Slik rengjør du den indre overflaten av klippedekselet
- Slik kontrollerer du skjæreutstyret
- Slik bytter du kniven
- Slik kontrollerer du oljenivået
- Slik skifter du motorolje
- Luftfilter
- Kontrollere tennpluggen
- Slik undersøker du drivstoffsystemet
- Slik justerer du clutchvaieren
- Transport, oppbevaring og avhending
- Tekniske data
- EF-samsvarserklæring
- Wstęp
- Bezpieczeństwo
- Montaż
- Obsługa
- Konserwacja
- Wstęp
- Plan konserwacji
- Przegląd ogólny
- Czyszczenie maszyny od zewnątrz
- Czyszczenie powierzchni wewnętrznych osłony osprzętu tnącego.
- Kontrola osprzętu tnącego
- Wymiana ostrza
- Kontrola poziomu oleju
- Wymiana oleju silnikowego
- Filtr powietrza
- Sprawdzanie świecy zapłonowej
- Kontrolowanie instalacji paliwowej
- Regulacja linki sprzęgła
- Transport, przechowywanie i utylizacja
- Dane techniczne
- Deklaracja zgodności WE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Introdução
- Esquema de manutenção
- Para efetuar uma inspeção geral
- Para limpar o produto externamente
- Para limpar a superfície interior da cobertura de corte
- Para examinar o equipamento de corte
- Para substituir a lâmina
- Para verificar o nível do óleo
- Para mudar o óleo de motor
- Filtro de ar
- Examinar a vela de ignição
- Para examinar o sistema de combustível
- Para ajustar o cabo de embraiagem
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Declaração CE de conformidade
- Introducere
- Siguranţă
- Asamblarea
- Operation (Funcționare)
- Întreţinerea
- Introducere
- Program de întreținere
- Pentru a efectua o inspecție generală
- Pentru a curăța produsul la exterior
- Pentru a curăța suprafața interioară a capacului de tăiere
- Pentru a examina echipamentul de tăiere
- Pentru a înlocui lama
- Pentru a verifica nivelul de ulei
- Pentru a schimba uleiul de motor
- Filtru de aer
- Pentru a verifica bujia
- Pentru a examina sistemul de alimentare cu carburant
- Pentru a regla cablul de ambreiaj
- Transportul, depozitarea şi eliminarea
- Date tehnice
- Declarație de conformitate CE
- Введение
- Безопасность
- Сборка
- Эксплуатация
- Техническое обслуживание
- Введение
- График технического обслуживания
- Выполнение общего осмотра
- Очистка изделия снаружи
- Очистка внутренней поверхности режущей деки
- Проверка режущего оборудования
- Замена ножа
- Проверка уровня масла
- Замена моторного масла
- Воздушный фильтр
- Проверка свечи зажигания
- Проверка топливной системы
- Регулировка троса сцепления
- Транспортировка, хранение и утилизация
- Технические данные
- Декларация соответствия ЕС
- Úvod
- Bezpečnosť
- Montáž
- Prevádzka
- Údržba
- Úvod
- Plán údržby
- Vykonanie všeobecnej kontroly
- Čistenie externých povrchov výrobku
- Čistenie vnútorného povrchu krytu rezacej časti
- Kontrola rezného zariadenia
- Výmena noža
- Kontrola hladiny oleja
- Výmena motorového oleja
- Vzduchový filter
- Kontrola zapaľovacej sviečky
- Kontrola palivového systému
- Nastavenie lanka spojky
- Preprava, skladovanie a likvidácia
- Technické údaje
- ES vyhlásenie o zhode
- Uvod
- Varnost
- Montaža
- Delovanje
- Vzdrževanje
- Uvod
- Urnik vzdrževanja
- Izvajanje splošnih pregledov
- Kako čistiti zunanjost izdelka
- Kako očistiti notranjo površino pokrova rezila
- Kako pregledati rezalno opremo
- Zamenjava rezil
- Kako preveriti nivo olja
- Kako zamenjati motorno olje
- Zračni filter
- Pregled svečke
- Kako pregledati sistem za gorivo
- Kako nastaviti žico sklopke
- Transport skladiščenje in odstranitev
- Tehnični podatki
- Izjava ES o skladnosti
- Uvod
- Bezbednost
- Sklapanje
- Rukovanje
- Održavanje
- Transport, skladištenje i odlaganje
- Tehnički podaci
- EZ deklaracija o usaglašenosti
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Transport, förvaring och kassering
- Tekniska data
- EG‐försäkran om överensstämmelse
- Giriş
- Güvenlik
- Montaj
- Kullanım
- Bakım
- Taşıma, depolama ve atma
- Teknik veriler
- AT Uyumluluk Bildirimi
- Вступ
- Безпека
- Збирання
- ЕКСПЛУАТАЦІЯ
- ТЕХНІЧНЕ ОБСЛУГОВУВАННЯ
- Вступ
- Графік технічного обслуговування
- Процедура загальної перевірки
- Чищення зовнішніх поверхонь виробу
- Чищення внутрішніх поверхонь кожуха леза
- Перевірка різального обладнання
- Заміна ножа
- Перевірка рівня оливи
- Заміна моторної оливи
- Повітряний фільтр
- Перевірка свічки запалювання
- Перевірка паливної системи
- Регулювання дроту зчеплення
- Транспортування, зберігання та утилізація
- Технічні дані
- Декларація відповідності ЄС
• If the blade hits an object or if vibrations occur, stop
the product immediately. Disconnect the ignition
cable from the spark plug. Examine the product for
damages. Repair damages or let an authorised
service agent do the repair.
• Never attach the engine brake handle permanently
to the handle when the engine is started.
• Put the product on a stable, flat surface and start it.
Make sure that the blade does not hit the ground or
other objects.
• Always stay behind the product when you operate it.
• Let all the wheels stay on the ground and keep 2
hands on the handle when you operate the product.
Keep your hands and feet away from the rotating
blades.
• Do not tilt the product when the engine is started.
• Be careful when you pull the product rearward.
• Never lift up the product when the engine is started.
If you must lift the product, first stop the engine and
disconnect the ignition cable from the spark plug.
• Do not walk rearward when you operate the product.
• Stop the engine when you move across areas
without grass, for example paths made of gravel,
stone and asphalt.
• Do not run with the product when the engine is
started. Always walk when you operate the product.
• Stop the engine before you change the cutting
height. Never make adjustments with the engine
started.
• Never let the product stay out of view with the engine
started. Stop the engine and make sure that the
cutting equipment does not rotate.
Safety instructions for operation
Personal protective equipment
WARNING: Read the warning instructions
that follow before you use the product.
• Personal protective equipment cannot fully prevent
injury but it decreases the degree of injury if an
accident does occur. Let your dealer help you select
the right equipment.
• Use heavy-duty slip-resistant boots or shoes. Do not
use open shoes or go with bare feet.
• Use heavy, long pants.
• Use protective gloves when necessary, for example
when you attach, examine or clean the cutting
equipment.
Safety devices on the product
WARNING: Read the warning instructions
that follow before you use the product.
• Do not use a product with defective safety devices.
• Do a check of the safety devices regularly. If the
safety devices are defective, speak to your
Husqvarna service agent.
Cutting cover
• Examine the cutting cover to make sure that there
are no damages such as cracks.
Engine brake handle
The engine brake handle stops the engine. When the
engine brake handle is released, the engine stops.
To do an inspection of the engine brake, start the engine
and then release the engine brake handle. If the engine
does not stop in 3 seconds, let an approved Husqvarna
service agent adjust the engine brake.
(Fig. 11 )
Muffler
The muffler keeps the noise levels to a minimum and
sends the exhaust fumes away from the operator.
Do not use the product if the muffler is missing or
defective. A defective muffler increases the noise level
and the risk of fire.
Examine the muffler regularly to make sure that it is
attached correctly and not damaged.
CAUTION: The muffler becomes very hot
during and after use and when the engine
operates at idle speed. Be careful near
flammable materials and/or fumes to prevent
fire.
Fuel safety
WARNING: Read the warning instructions
that follow before you use the product.
• Do not start the product if there is fuel or engine oil
on the product. Remove the unwanted fuel/oil and let
the product dry.
• If you spill fuel on your clothing, change clothing
immediately.
• Do not get fuel on your body, it can cause injury. If
you get fuel on your body, use soap and water to
remove the fuel.
• Do not start the product if the engine has a leak.
Examine the engine for leaks regularly.
• Be careful with fuel. Fuel is flammable and the fumes
are explosive and can cause injuries or death.
• Do not breathe in the fuel fumes, it can cause injury.
Make sure that there is a sufficient airflow.
• Do not smoke near the fuel or the engine.
• Do not put warm objects near the fuel or the engine.
• Do not add the fuel when the engine is on.
• Make sure that the engine is cool before you refuel.
8
801 - 001 - 11.06.2018