User Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Introduction
- Maintenance schedule
- To do a general inspection
- To clean the product externally
- To clean the inner surface of the cutting cover
- To examine the cutting equipment
- To replace the blade
- To do a check of the oil level
- To change the engine oil
- Air filter
- To examine the spark plug
- To examine the fuel system
- To adjust the clutch wire
- Transportation, storage and disposal
- Technical data
- EC Declaration of Conformity
- Въведение
- Безопасност
- Монтаж
- Експлоатация
- Поддръжка
- Въведение
- График за техническо обслужване
- За извършване на обща проверка
- За външно почистване на машината
- За почистване на вътрешната повърхност на капака на режещите части
- За проверка на режещото оборудване
- За сменяне на ножовете
- За проверка на нивото на маслото
- За смяна на моторното масло
- Въздушен филтър
- За проверка на запалителната свещ
- За проверка на горивната система
- За регулиране на кабела на съединителя
- Транспортиране, съхранение и изхвърляне
- Технически характеристики
- Декларация за съответствие на ЕО
- Úvod
- Bezpečnost
- Montáž
- Provoz
- Údržba
- Přeprava, skladování a likvidace
- Technické údaje
- ES Prohlášení o shodě
- Indledning
- Sikkerhed
- Montering
- Drift
- Vedligeholdelse
- Indledning
- Vedligeholdelsesskema
- Sådan udføres et generelt eftersyn
- Sådan rengøres produktet udvendigt
- Sådan rengøres indersiden af klippeskjoldet
- Sådan efterses skæreudstyret
- Sådan udskiftes klingen
- Sådan kontrolleres oliestanden
- Sådan skiftes motorolien
- Luftfilter
- Sådan undersøger du tændrøret
- Sådan undersøger du brændstofsystemet
- Sådan justeres koblingskablet
- Transport, opbevaring og bortskaffelse
- Tekniske data
- EU-overensstemmelseserklæring
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Wartung
- Einleitung
- Wartungsplan
- So führen Sie eine allgemeine Inspektion durch
- So reinigen Sie das Produkt außen
- So reinigen Sie die Innenseite der Schneidewerkabdeckung
- So prüfen Sie die Schneidausrüstung
- So tauschen Sie das Messer aus
- So prüfen Sie den Ölstand
- So wechseln Sie das Motoröl
- Luftfilter
- So überprüfen Sie die Zündkerze
- So prüfen Sie die Kraftstoffanlage
- So passen Sie das Kupplungsseil an
- Transport, Lagerung und Entsorgung
- Technische Angaben
- EG-Konformitätserklärung
- Εισαγωγή
- Ασφάλεια
- Συναρμολόγηση
- Λειτουργία
- Συντήρηση
- Εισαγωγή
- Πρόγραμμα συντήρησης
- Για να εκτελέσετε γενική επιθεώρηση
- Για να καθαρίσετε εξωτερικά το προϊόν
- Για να καθαρίσετε την εσωτερική επιφάνεια του καλύμματος κοπής
- Για να ελέγξετε τον εξοπλισμό κοπής
- Για να αντικαταστήσετε τη λεπίδα
- Έλεγχος της στάθμης λαδιού
- Αλλαγή του λαδιού του κινητήρα
- Φίλτρο αέρα
- Για να εξετάσετε το μπουζί
- Για να ελέγξετε το σύστημα καυσίμου
- Για να ρυθμίζετε την ντίζα του συμπλέκτη
- Μεταφορά, αποθήκευση και απόρριψη
- Τεχνικά στοιχεία
- Δήλωση Συμμόρφωσης ΕΚ
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Introducción
- Programa de mantenimiento
- Para realizar una inspección general
- Para limpiar el producto externamente
- Para limpiar la superficie interior de la cubierta de corte
- Para inspeccionar el equipo de corte
- Para sustituir la cuchilla
- Para realizar una comprobación del nivel de aceite
- Para cambiar el aceite del motor
- Filtro de aire
- Para examinar la bujía
- Para inspeccionar el sistema de combustible
- Para ajustar el cable de embrague
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Declaración CE de conformidad
- Sissejuhatus
- Ohutus
- Kokkupanek
- Töö
- Hooldamine
- Transportimine, hoiulepanek ja utiliseerimine
- Tehnilised andmed
- EÜ vastavusdeklaratsioon
- Johdanto
- Turvallisuus
- Asentaminen
- Toiminta
- Huolto
- Johdanto
- Huoltokaavio
- Yleistarkastus
- Laitteen puhdistaminen ulkopuolelta
- Leikkuusuojuksen sisäpinnan puhdistaminen
- Terävarustuksen tarkistaminen
- Terän vaihtaminen
- Öljyn määrän tarkistaminen
- Moottoriöljyn vaihtaminen
- Ilmansuodatin
- Sytytystulpan tarkistus
- Polttoainejärjestelmän tarkistaminen
- Kytkinjohdon säätäminen
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- EY-vaatimustenmukaisuusvakuutus
- Introduction
- Sécurité
- Montage
- Utilisation
- Maintenance
- Introduction
- Schéma d'entretien
- Pour faire une inspection générale
- Pour nettoyer la partie extérieure du produit
- Pour nettoyer la surface interne du capot de coupe
- Pour inspecter l'équipement de coupe
- Pour remplacer la lame
- Pour contrôler le niveau d'huile
- Pour vidanger l'huile moteur
- Filtre à air
- Pour vérifier la bougie
- Pour examiner le système de carburant
- Pour régler le câble d'embrayage
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Déclaration de conformité CE
- Uvod
- Sigurnost
- Sastavljanje
- Rad
- Održavanje
- Prijevoz, spremanje i zbrinjavanje
- Tehnički podaci
- Izjava o sukladnosti EC
- Bevezető
- Biztonság
- Összeszerelés
- Üzemeltetés
- Karbantartás
- Bevezető
- Karbantartási terv
- Általános ellenőrzés
- A termék külső tisztítása
- A vágóburkolat belső felületének tisztítása
- A vágószerkezet ellenőrzése
- A kés cseréje
- Az olajszint ellenőrzése
- A motorolaj cseréje
- Légszűrő
- A gyújtógyertya ellenőrzése.
- Az üzemanyagrendszer ellenőrzése
- A tengelykapcsoló bovden beállítása
- Szállítás, tárolás és ártalmatlanítás
- Műszaki adatok
- EK megfelelőségi nyilatkozat
- Introduzione
- Sicurezza
- Montaggio
- Utilizzo
- Manutenzione
- Introduzione
- Programma di manutenzione
- Per effettuare un'ispezione generale
- Per pulire esternamente il prodotto
- Per pulire la superficie interna del coperchio di taglio
- Per controllare l’attrezzatura di taglio
- Per sostituire la lama
- Per eseguire il controllo del livello dell’olio
- Per sostituire l’olio motore
- Filtro dell’aria
- Per esaminare la candela
- Per controllare il sistema di alimentazione
- Per regolare il filo della frizione
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Dichiarazione CE di conformità
- Įvadas
- Sauga
- Surinkimas
- Naudojimas
- Priežiūra
- Transportavimas, saugojimas ir utilizavimas
- Techniniai duomenys
- EB atitikties deklaracija
- Ievads
- Drošība
- Montāža
- Lietošana
- Tehniskā apkope
- Pārvadāšana, glabāšana un utilizēšana
- Tehniskie dati
- EK atbilstības deklarācija
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Vervoer, opslag en verwerking
- Technische gegevens
- EG-conformiteitsverklaring
- Innledning
- Sikkerhet
- Montering
- Bruk
- Vedlikehold
- Innledning
- Vedlikeholdsskjema
- Slik utfører du en generell inspeksjon
- Slik rengjør du produktet på utsiden
- Slik rengjør du den indre overflaten av klippedekselet
- Slik kontrollerer du skjæreutstyret
- Slik bytter du kniven
- Slik kontrollerer du oljenivået
- Slik skifter du motorolje
- Luftfilter
- Kontrollere tennpluggen
- Slik undersøker du drivstoffsystemet
- Slik justerer du clutchvaieren
- Transport, oppbevaring og avhending
- Tekniske data
- EF-samsvarserklæring
- Wstęp
- Bezpieczeństwo
- Montaż
- Obsługa
- Konserwacja
- Wstęp
- Plan konserwacji
- Przegląd ogólny
- Czyszczenie maszyny od zewnątrz
- Czyszczenie powierzchni wewnętrznych osłony osprzętu tnącego.
- Kontrola osprzętu tnącego
- Wymiana ostrza
- Kontrola poziomu oleju
- Wymiana oleju silnikowego
- Filtr powietrza
- Sprawdzanie świecy zapłonowej
- Kontrolowanie instalacji paliwowej
- Regulacja linki sprzęgła
- Transport, przechowywanie i utylizacja
- Dane techniczne
- Deklaracja zgodności WE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Introdução
- Esquema de manutenção
- Para efetuar uma inspeção geral
- Para limpar o produto externamente
- Para limpar a superfície interior da cobertura de corte
- Para examinar o equipamento de corte
- Para substituir a lâmina
- Para verificar o nível do óleo
- Para mudar o óleo de motor
- Filtro de ar
- Examinar a vela de ignição
- Para examinar o sistema de combustível
- Para ajustar o cabo de embraiagem
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Declaração CE de conformidade
- Introducere
- Siguranţă
- Asamblarea
- Operation (Funcționare)
- Întreţinerea
- Introducere
- Program de întreținere
- Pentru a efectua o inspecție generală
- Pentru a curăța produsul la exterior
- Pentru a curăța suprafața interioară a capacului de tăiere
- Pentru a examina echipamentul de tăiere
- Pentru a înlocui lama
- Pentru a verifica nivelul de ulei
- Pentru a schimba uleiul de motor
- Filtru de aer
- Pentru a verifica bujia
- Pentru a examina sistemul de alimentare cu carburant
- Pentru a regla cablul de ambreiaj
- Transportul, depozitarea şi eliminarea
- Date tehnice
- Declarație de conformitate CE
- Введение
- Безопасность
- Сборка
- Эксплуатация
- Техническое обслуживание
- Введение
- График технического обслуживания
- Выполнение общего осмотра
- Очистка изделия снаружи
- Очистка внутренней поверхности режущей деки
- Проверка режущего оборудования
- Замена ножа
- Проверка уровня масла
- Замена моторного масла
- Воздушный фильтр
- Проверка свечи зажигания
- Проверка топливной системы
- Регулировка троса сцепления
- Транспортировка, хранение и утилизация
- Технические данные
- Декларация соответствия ЕС
- Úvod
- Bezpečnosť
- Montáž
- Prevádzka
- Údržba
- Úvod
- Plán údržby
- Vykonanie všeobecnej kontroly
- Čistenie externých povrchov výrobku
- Čistenie vnútorného povrchu krytu rezacej časti
- Kontrola rezného zariadenia
- Výmena noža
- Kontrola hladiny oleja
- Výmena motorového oleja
- Vzduchový filter
- Kontrola zapaľovacej sviečky
- Kontrola palivového systému
- Nastavenie lanka spojky
- Preprava, skladovanie a likvidácia
- Technické údaje
- ES vyhlásenie o zhode
- Uvod
- Varnost
- Montaža
- Delovanje
- Vzdrževanje
- Uvod
- Urnik vzdrževanja
- Izvajanje splošnih pregledov
- Kako čistiti zunanjost izdelka
- Kako očistiti notranjo površino pokrova rezila
- Kako pregledati rezalno opremo
- Zamenjava rezil
- Kako preveriti nivo olja
- Kako zamenjati motorno olje
- Zračni filter
- Pregled svečke
- Kako pregledati sistem za gorivo
- Kako nastaviti žico sklopke
- Transport skladiščenje in odstranitev
- Tehnični podatki
- Izjava ES o skladnosti
- Uvod
- Bezbednost
- Sklapanje
- Rukovanje
- Održavanje
- Transport, skladištenje i odlaganje
- Tehnički podaci
- EZ deklaracija o usaglašenosti
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Transport, förvaring och kassering
- Tekniska data
- EG‐försäkran om överensstämmelse
- Giriş
- Güvenlik
- Montaj
- Kullanım
- Bakım
- Taşıma, depolama ve atma
- Teknik veriler
- AT Uyumluluk Bildirimi
- Вступ
- Безпека
- Збирання
- ЕКСПЛУАТАЦІЯ
- ТЕХНІЧНЕ ОБСЛУГОВУВАННЯ
- Вступ
- Графік технічного обслуговування
- Процедура загальної перевірки
- Чищення зовнішніх поверхонь виробу
- Чищення внутрішніх поверхонь кожуха леза
- Перевірка різального обладнання
- Заміна ножа
- Перевірка рівня оливи
- Заміна моторної оливи
- Повітряний фільтр
- Перевірка свічки запалювання
- Перевірка паливної системи
- Регулювання дроту зчеплення
- Транспортування, зберігання та утилізація
- Технічні дані
- Декларація відповідності ЄС
![](/manual/husqvarna/9676368-01/user-manual-bulgarian-czech-danish-german-greek-english-spanish-estonian-finnish-french-croatian-hungarian-italian-lithuanian-latvian-norwegian-bokmal-dutch-polish-portuguese-romanian-russian-slovak-slovenian-swedish-turkish-ukrainian/images/img-9.png)
• Before you refuel, open the fuel tank cap slowly and
release the pressure carefully.
• Do not add fuel to the engine in an indoor area. Not
sufficient airflow can cause injury or death because
of asphyxiation or carbon monoxide.
• Tighten the fuel tank cap fully. If the fuel tank cap is
not tightened, there is a risk of fire.
• Move the product a minimum of 3 m (10 ft) from the
position where you filled the tank before a start.
• Do not put too much fuel in the fuel tank.
Safety instructions for maintenance
WARNING: Read the warning instructions
that follow before you use the product.
• The exhaust fumes from the engine contain carbon
monoxide, an odourless, poisonous and very
dangerous gas. Do not start the engine indoors or in
closed spaces.
• Before you do the maintenance on the product, stop
the engine and remove the ignition cable from the
spark plug.
• Use protective gloves when you do maintenance on
the cutting equipment. The blade is very sharp and
cuts can easily occur.
• Accessories and changes to the product that are not
approved by the manufacturer, can cause serious
injury or death. Do not change the product. Always
use accessories that are approved by the
manufacturer.
• If the maintenance is not done correctly and
regularly, the risk of injury and damage to the
product increases.
• Only do the maintenance as given in this owner's
manual. All other servicing must be done by an
approved Husqvarna service agent.
• Let an approved Husqvarna service agent do
servicing on the product regularly.
• Replace damaged, worn or broken parts.
Assembly
To assemble the handle
1. Put the pins at the bottom of the lower handle into
the holes as given in the illustration. Align the screw
holes and attach the screws, washers and knobs.
Tighten the knobs fully.(Fig. 12 )
2. Align the holes in the handlebar with the holes in the
lower handle and attach the screws, washers and
knobs. On the right side also attach the loop for the
starter rope. Tighten the knobs fully.(Fig. 13 )
3. Use enclosed cable holders to attach the cables to
the handle.(Fig. 14 )
Note: Make sure that the tension in the cables is not
too high.
To adjust the handle height
1. Loosen the lower knobs.(Fig. 15 )
2. Dismantle the knob, washer, and screw.
3. The handle can be set to 2 different heights. Adjust
the handle to a suitable height with the fixing screw
in one of the two holes.(Fig. 16 )
4. Fit the screw and knob.
5. Slide the knobs up towards the handle until they stop
and a click is heard. Tighten the knobs properly.(Fig.
17 )
To set the product in transport position
1. Remove the grass catcher.
2. Loosen the knobs on the upper handle and fold the
handle down.(Fig. 18 )
3. Loosen the lower knobs.
4. Move the knobs to the lower end of the grooves on
the left and the right side of the product.(Fig. 19 )
5. Fold the handle forward.(Fig. 20 )
To set the product in operation position
1. Lift the handlebar until the lower handle locks in
operation position.(Fig. 21 )
2. Move the knobs up in the direction of the handle until
they stop and you hear a click.
3. Tighten the knobs fully.(Fig. 22 )
4. Lift the top part of the handlebar.
5. Tighten the knobs fully.(Fig. 23 )
To assemble the grass catcher
1. Put the top part of the grass catcher onto the lower
part of the grass catcher.(Fig. 24 )
2. Attach the grass catcher frame with the clips.(Fig.
25 )
3. Lift the rear cover.
4. Attach the hooks on the grass catcher to the top
edge of the chassis.(Fig. 26 )
5. Put the lower part of the grass catcher into the grass
discharge channel.
801 - 001 - 11.06.2018 9