Use and Care Guide
3 Installation
3.1 Presentation
This chapter contains information that is important to be
aware of when planning the installation.
Before starting the installation make yourself familiar
with what is included in the carton.
Automower 310/315
Robotic lawnmower √
Charging station √
Power supply √
Low voltage cable √
Charging station screws 5 pcs
Allen key √
Measurement gauge √
Cable markers √
Operator's manual and
Quick guide
√
Extra blades 9 pcs
Alarm decal √
3.1.1 Main components for installation
The installation of the robotic lawnmower involves 4
main components:
1. A robotic lawnmower that mows the lawn by
essentially operating in a random pattern.
2. A charging station, to where the robotic lawnmower
returns when the battery level becomes too low.
3. A power supply, which is connected to the charging
station and a 100-240V wall socket. The power
supply is connected to the wall socket and to the
charging station using a 10 m / 33 ft. long low
voltage cable. Low voltage cables with 3 m / 10 ft.
and 20 m / 65 ft. length are available as optional
accessories. No parts of the power supply must be
changed or tampered with. For example the low
voltage cable must not be shortened or extended.
4. Loop wire, which is laid around the edges of the
lawn and around objects and plants that the robotic
lawnmower must not run into. The loop wire is used
both as a boundary wire and a guide wire. The
maximum permitted length for the boundary loop is
400 m / 1300 ft.
3.2 Preparations
Read through this entire chapter before beginning the
installation. How the installation is done also affects how
well the robotic lawnmower works. It is therefore
important to plan the installation carefully.
Planning is simplified if you make a sketch of the
working area, including all obstacles. This makes it
easier to see the ideal positions for the charging station,
the boundary wire and the guide wire. Draw on the
sketch where the boundary and guide wires should be
routed.
Visit www.husqvarna.com for further descriptions and
tips regarding installation.
1. If the lawn in the working area is longer than 10 cm /
4 in. mow it using a standard lawnmower. Collect the
grass.
2. Fill in holes and hollows to stop rainwater forming
pools of water. The product may be damaged if it is
operated in pools of water. See
Guarantee terms on
page 60
.
3. Read carefully through all the steps before the
installation.
4. Check that all parts for the installation are included.
See
Product overview on page 6
.
• Robotic lawnmower
• Charging station
473 - 001 - Installation - 11