Use and Care Guide

3.14.2.2 Change PIN code
Enter the new PIN code and press OK. Confirm by
entering the same code again and pressing OK. When
the PIN code is changed, the message PIN code
changed appears in the display.
Make a note of the new PIN code on the designated line
in Memo. See Memo on page 3 .
3.14.2.3 Duration
Duration
Duration of alarm
Duration of time lock
Duration of alarm
When Alarm is activated ( High security) there is also the
possibility to select how long the alarm signal should
last. A figure between 1 and 20 minutes can be
selected.
Duration of time lock
A time lock can be set to decide how many days will
pass before the PIN must be entered before use. 1-90
days can be selected.
3.15 Messages
In this menu the previous fault and information
messages can be found. For some of the most common
fault messages, there are tips and advice to help you
rectify the fault.
MESSAGES
Fault messages
Info messages
3.15.1 Fault messages
If the robotic lawnmower is disrupted in any way e.g.
gets stuck under a fallen branch a message is shown in
the lawnmower’s display relating to the disruption and
the time it happened.
If the same fault message is repeated several times, this
may indicate that an adjustment to the installation or the
robotic lawnmower is required. See Fault messages on
page 48 for more information on possible reasons for
each message.
The list contains the latest 50 fault messages sorted by
date with the last incident to occur first on the list.
The date and time when the fault messages are
displayed can be shown by selecting a fault message
and pressing the OK button.
Tips and advice to help you rectify the fault, are also
displayed.
3.15.2 Info messages
Messages shown in the display not caused by an actual
fault are instead saved under the Info messages
heading. Examples for such messages is Slope too
steep . See Information messages on page 51 for more
information on possible reasons for each message.
The list contains the latest 50 fault messages sorted by
date with the latest incident to occur first on the list.
3.16 Weather timer
Only applicable for Automower 315
WEATHER TIMER
Use Weather timer
The weather timer allows the robotic lawnmower to
automatically adjust its mowing times based on how
quick the lawn grows.
When the weather timer is activated, the robotic
lawnmower needs time to decide what the optimal
mowing time is for the working area in question. For this
reason it can take a couple of days before the mowing
results are optimal.
The robotic lawnmower can not operate longer than the
timer settings. For optimal weather timer performance, it
is therefore recommended when setting the timer to only
de-select the times when the robotic lawnmower must
not operate. Other times should be made available for
the weather timer.
When the weather timer is activated, it is very important
to regularly check that the blade disc is clean and that
the blades are in good condition. Any grass twisted
around the blade disc shaft or blunt blades can affect
how the weather timer functions.
3.16.1 To activate the weather timer
Check the box by pressing OK to activate the weather
timer.
3.16.2 Cutting time
If the mowing results are not optimal when using the
Weather timer , Cutting time settings may need
adjusting.
The longer cutting time that is chosen, the longer the
robotic lawnmower will be allowed to work.
Cutting time
Low
Medium
High
3.16.2.1 To adjust the cutting time
1. Place the cursor by Cutting time and press OK.
26 - Installation 473 - 001 -