Use and Care Guide

ECO mode the robotic lawnmower otherwise can not be
started inside the working area.
3.18.3 Spiral cutting
If the robotic lawnmower enters an area where it senses
the grass is longer than average, it can change the
movement pattern. It can then mow in a spiral pattern to
faster cut the area of longer grass.
Intensity
Low-
Low
HighHigh
High+
Use Spiral cutting
Mid
Spiral cutting is activated by default, uncheck the box to
deactivate.
The level of intensity can be adjusted to set how much
over the average height the grass has to be for spiral
cutting to begin. Low- / Low sensitivity means that spiral
cutting begins less often. High / High+ sensitivity means
that spiral cutting begins more often.
In order to minimize the risk for lawn wear in steep
slopes, spiral cutting does not start in slopes steeper
than 15%.
3.18.4 General
Set language and time or reset user settings to factory
default.
General Time & date
Language
Country
Reset all user settings
About
3.18.4.1 Time & Date
This function allows you to set current time and date and
required formats.
Time & Date Set time
Set date
Time format
Date format
• Set time: Enter the correct time and press OK to
exit.
• Set date: Enter correct date and press OK to exit.
• Time format: Place the cursor at the required time
format: 12h 24h. Press OK to exit.
• Date format: Place the cursor at the required date
format:
YYYY-MM-DD (year-month-day)
MM-DD-YYYY (month-day-year)
DD-MM-YYYY (day-month-year)
Exit by pressing OK.
3.18.4.2 Language
Set language with this function.
To select language: Place the cursor at the required
language and press OK.
3.18.4.3 Country
With this function you can select in what country the
robotic lawnmower will work.
Place the cursor at the required country and press OK.
3.18.4.4 Reset all user settings
This function allows you to reset the robotic lawnmower
to the factory default settings.
The following settings are however not altered:
• Security level
• PIN code
• Loop signal
• Messages
• Date & Time
• Language
• Country
1. Select Reset all user settings in the menu and press
OK.
2. Confirm by pressing OK.
3.18.4.5 About
The
About menu displays information about the robotic
lawnmower's serial number and different software
versions.
3.19 Accessories
Settings for accessories mounted on the mower can be
made in this menu.
473 - 001 - Installation - 33