Use and Care Guide

3.22 Yard layout examples
The robotic mower’s behaviour is controlled to a certain extent by what settings are made. Adapting the robotic
lawnmower's settings according to the shape of the lawn makes it easier for the robotic lawnmower to frequently
reach all parts and therefore achieve a perfect mowing result.
Different layouts require different settings. The following pages outline a number of layout examples with installation
proposals and settings.
The recommended timer settings in the following examples are applicable to Automower 310/315 unless otherwise
stated.
There is more installation help on www.husqvarna.com. Select country, then enter the supportpages for more
information and videos.
Note: The default settings for the robotic lawnmower have been chosen to work in as many different gardens as
possible. The settings only need to be adjusted when special installation conditions exist.
3.22.1 Open and level area
Area
150 m
2
/ 1615 sq. ft.
Timer Automower 310
08:00 am - 02:00 pm, Monday, Wed-
nesday, Friday
Automower 315
08:00 am - 03:00 pm, Monday, Wed-
nesday, Friday
Lawn coverage Factory setting
Remarks The timer should be used to prevent
the grass looking trampled since the
area is less than the maximum ca-
pacity of the robotic lawnmower.
As the area is open and uncomplica-
ted there is no need for a guide wire
in this installation.
3.22.2 A number of islands and a 35% slope
Area
500 m
2
/ 5382 sq.fr.
270˚
90˚
Timer Automower 310
08:00 am - 06:30 pm , Monday to
Sunday
Automower 315
08:00 am - 04:30 pm, Monday to
Sunday
Lawn coverage Factory setting
Find charging sta-
tion
Factory setting
Remarks Place the charging station in the low-
er part of the working area. Lay the
guide wire at an angle over the steep
slope. Make sure guide wire is laid
according to recommendations in
Laying and connecting the guide wire
on page 20
38 - Installation 473 - 001 -