User Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Maintenance schedule
- Daily maintenance
- Weekly maintenance
- Monthly maintenance
- Yearly maintenance
- Intermittent maintenance
- To adjust the idle speed
- To do maintenance on the spark arrester mesh
- To do maintenance on the spark plug
- To clean the air filter
- To sharpen the saw chain
- To lubricate the cutting equipment
- Transportation
- Storage
- Technical data
- Accessories
- Contents of the EC declaration of conformity
- Einleitung
- Sicherheit
- Montage
- Betrieb
- So verwenden Sie den Kraftstoff
- Vor dem Starten des Motors
- So starten Sie bei kaltem Motor
- So starten Sie einen warmen Motor
- So starten Sie den Motor, wenn der Kraftstoff zu heiß ist
- So stoppen Sie das Gerät
- So verwenden Sie eine Rindenstütze
- So fällen Sie einen Baum
- So entasten Sie einen Baum
- So zersägen Sie einen Baumstamm
- Wartung
- Transport
- Lagerung
- Technische Daten
- Zubehör
- Inhalt der EG-Konformitätserklärung
- Introduction
- Sécurité
- Montage
- Utilisation
- Entretien
- Schéma d'entretien
- Entretien quotidien
- Entretien hebdomadaire
- Entretien mensuel
- Maintenance annuelle
- Entretien périodique
- Pour régler le régime de ralenti
- Pour effectuer l'entretien de la grille pare-étincelles
- Pour effectuer l’entretien de la bougie d’allumage
- Pour nettoyer le filtre à air
- Pour affûter la chaîne de sciage
- Pour lubrifier l’équipement de coupe
- Transport
- Remisage
- Caractéristiques techniques
- Accessoires
- Contenu de la déclaration de conformité CE
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Programa de mantenimiento
- Mantenimiento diario
- Mantenimiento semanal
- Mantenimiento mensual
- Mantenimiento anual
- Mantenimiento intermitente
- Para ajustar el régimen de ralentí
- Para realizar el mantenimiento de la red apagachispas
- Para realizar el mantenimiento de la bujía
- Para limpiar el filtro de aire
- Para afilar la cadena de sierra
- Para lubricar el equipo de corte
- Transporte
- Almacenamiento
- Datos técnicos
- Accesorios
- Contenido de la declaración de conformidad CE
- Introduzione
- Sicurezza
- Definizioni di sicurezza
- Istruzioni di sicurezza generali
- Istruzioni di sicurezza per l’utilizzo
- Istruzioni di sicurezza per la manutenzione
- Montaggio
- Utilizzo
- Manutenzione
- Programma di manutenzione
- Manutenzione giornaliera
- Manutenzione settimanale
- Manutenzione mensile
- Manutenzione annuale
- Manutenzione occasionale
- Per regolare il regime minimo
- Per gli interventi di manutenzione della rete parascintille
- Per gli interventi di manutenzione della candela
- Per pulire il filtro dell'aria
- Per affilare la catena
- Per lubrificare l'attrezzatura di taglio
- Trasporto
- Rimessaggio
- Dati tecnici
- Accessori
- Contenuto della dichiarazione di conformità CE
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Transport
- Opslag
- Technische gegevens
- Accessoires
- Inhoud van de EG-verklaring van overeenstemming
- Introduktion
- Säkerhet
- Montering
- Drift
- underhåll
- Transport
- Förvaring
- Tekniska data
- Tillbehör
- Innehållet i EG-försäkran om överensstämmelse
- Innledning
- Sikkerhet
- Montering
- Bruk
- Vedlikehold
- Transport
- Oppbevaring
- Tekniske data
- Tilbehør
- Innholdet i EF-samsvarserklæringen
- Indledning
- Sikkerhed
- Montering
- Drift
- Vedligeholdelse
- Vedligeholdelsesskema
- Dagligt eftersyn
- Ugentligt eftersyn
- Månedligt eftersyn
- Årlig vedligeholdelse
- Periodisk vedligeholdelse
- Sådan justerer du tomgangshastigheden
- Sådan foretager du vedligeholdelse på gnistfangernettet.
- Sådan foretager du vedligeholdelse på tændrøret
- Rengøring af luftfilteret
- Sådan skærpes savkæden
- Sådan smøres skæreudstyret
- Transport
- Opbevaring
- Tekniske data
- Tilbehør
- Indhold i EF-overensstemmelseserklæring
- Johdanto
- Turvallisuus
- Asentaminen
- Käyttö
- Huolto
- Kuljettaminen
- Säilytys
- Tekniset tiedot
- Lisävarusteet
- EU:n vaatimustenmukaisuusvakuutus
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Esquema de manutenção
- Controle diário
- Controle semanal
- Manutenção mensal
- Manutenção anual
- Manutenção intermitente
- Ajustar o ralenti
- Realizar tarefas de manutenção na rede retentora de faíscas
- Para efetuar a manutenção da vela de ignição
- Para limpar o filtro de ar
- Para afiar a corrente da serra
- Para lubrificar o equipamento de corte
- Transporte
- Armazenamento
- Especificações técnicas
- Acessórios
- Conteúdo da declaração de conformidade CE
- Εισαγωγή
- Ασφάλεια
- Συναρμολόγηση
- Λειτουργία
- Συντήρηση
- Πρόγραμμα συντήρησης
- Καθημερινή συντήρηση
- Εβδομαδιαία συντήρηση
- Μηνιαία συντήρηση
- Ετήσια συντήρηση
- Διακεκομμένη συντήρηση
- Για να ρυθμίσετε τις στροφές ανά λεπτό ρελαντί
- Εκτέλεση εργασιών συντήρησης στη σίτα συγκράτησης των σπινθήρων
- Εκτέλεση εργασιών συντήρησης στο μπουζί
- Καθαρισμός του φίλτρου αέρα
- Ακόνισμα αλυσίδας πριονιού
- Λίπανση του εξοπλισμού κοπής
- Μεταφορά
- Αποθήκευση
- Τεχνικά στοιχεία
- Αξεσουάρ
- Περιεχόμενα της Δήλωσης Συμμόρφωσης ΕΚ
- Úvod
- Bezpečnost
- Montáž
- Provoz
- Údržba
- Přeprava
- Skladování
- Technické údaje
- Příslušenství
- Obsah prohlášení o shodě ES
- Uvod
- Sigurnost
- Sastavljanje
- Rad
- Održavanje
- Prijevoz
- Skladištenje
- Tehnički podaci
- Dodaci
- Sadržaj deklaracije o usklađenosti EZ-a
- Uvod
- Varnost
- Montaža
- Delovanje
- Vzdrževanje
- Prevoz
- Shranjevanje
- Tehnični podatki
- Dodatna oprema
- Vsebina izjave ES o skladnosti
- Wstęp
- Bezpieczeństwo
- Montaż
- Obsługa
- Przegląd
- Transport
- Przechowywanie
- Dane techniczne
- Akcesoria
- Treść deklaracji zgodności z normami WE
- Úvod
- Bezpečnosť
- Montáž
- Prevádzka
- Údržba
- Preprava
- Skladovanie
- Technické údaje
- Príslušenstvo
- Obsah vyhlásenia o zhode ES
- Bevezető
- Biztonság
- Összeszerelés
- Üzemeltetés
- Karbantartás
- Szállítás
- Tárolás
- Műszaki adatok
- Tartozékok
- Az EK-megfelelőségi nyilatkozat tartalma
- Введение
- Безопасность
- Сборка
- Эксплуатация
- Техническое обслуживание
- График технического обслуживания
- Ежедневное обслуживание
- Еженедельное обслуживание
- Ежемесячное обслуживание
- Ежегодное обслуживание
- Периодическое обслуживание
- Регулировка скорости холостого хода
- Техобслуживание искрогасительной сетки
- Техобслуживание свечи зажигания
- Очистка воздушного фильтра
- Заточка цепи пилы
- Смазка режущего оборудования
- Транспортировка
- Хранение
- Технические данные
- Принадлежности
- Содержание декларации о соответствии ЕС
- Sissejuhatus
- Ohutus
- Kokkupanek
- Töö
- Hooldamine
- Transportimine
- Hoiustamine
- Tehnilised andmed
- Lisatarvikud
- EL-i vastavusdeklaratsiooni sisu
- Įvadas
- Sauga
- Surinkimas
- Naudojimas
- Techninės priežiūros darbas
- Priežiūros grafikas
- Kasdienė techninė priežiūra
- Savaitinė techninė priežiūra
- Mėnesinė techninė priežiūra
- Kasmetinė techninė priežiūra
- Protarpiais atliekama techninė priežiūra
- Greičio tuščiąja eiga reguliavimas
- Kibirkščių sulaikymo tinklelio priežiūra
- Uždegimo žvakės priežiūra
- Kaip išvalyti oro filtrą
- Pjūklo grandinės galandimas
- Pjovimo įrangos tepimas
- Transportavimas
- Laikymas
- Techniniai duomenys
- Priedai
- EB atitikties deklaracijos turinys
- Ievads
- Drošība
- Montāža
- Lietošana
- Apkope
- Transportēšana
- Glabāšana
- Tehniskie dati
- Piederumi
- EK atbilstības deklarācijas saturs
- Въведение
- Безопасност
- Монтиране
- Експлоатация
- Поддръжка
- График за техническо обслужване
- Всекидневно обслужване
- Седмично техническо обслужване
- Месечно техническо обслужване
- Ежегодно обслужване
- Периодично обслужване
- Регулиране на оборотите на празния ход
- За техническо обслужване на искрогасителната мрежа
- Техническо обслужване на запалителната свещ
- Почистване на въздушния филтър
- Заточване на веригата за моторен трион
- Смазване на режещото оборудване
- Транспортиране
- Съхранение
- Технически данни
- Принадлежности
- Съдържание на ЕО декларацията за съответствие
- Introducere
- Siguranţă
- Definiţii privind siguranţa
- Instrucțiuni generale de siguranță
- Instrucțiuni de siguranță pentru utilizare
- Instrucțiuni de siguranță pentru întreținere
- Asamblarea
- Funcționarea
- Pentru utilizarea carburantului
- Înainte de pornirea motorului
- Pentru pornirea unui motor rece
- Pentru pornirea unui motor cald
- Pentru a porni motorul când carburantul este prea fierbinte
- Pentru oprire
- Utilizarea unei bare de protecție
- Pentru a doborî un copac
- Tăierea ramurilor unui arbore
- Ferăstruirea unui buștean
- Întreținerea
- Program de întreţinere
- Întreținerea zilnică
- Întreținerea săptămânală
- Întreținerea lunară
- Întreținerea anuală
- Întreţinere intermitentă
- Pentru reglarea turaţiei de mers în gol
- Pentru a efectua operații de întreținere la sita parascântei
- Pentru a efectua operații de întreținere a bujiei
- Pentru a curăța filtrul de aer
- Pentru ascuţirea lanţului de ferăstrău
- Pentru a unge echipamentul de tăiere
- Transportul
- Depozitarea
- Date tehnice
- Accesorii
- Conținutul declarației de conformitate CE
- Giriş
- Güvenlik
- Montaj
- Kullanım
- Bakım
- Taşıma
- Saklama
- Teknik veriler
- Aksesuarlar
- AB uyumluluk bildiriminin içeriği
- Вступ
- Безпека
- Збирання
- Експлуатація
- Технічне обслуговування
- Графік технічного обслуговування
- Щоденне технічне обслуговування
- Щотижневе технічне обслуговування
- Щомісячне технічне обслуговування
- Щорічне обслуговування
- Періодичне технічне обслуговування
- Налаштування швидкості холостого ходу
- Технічне обслуговування іскропоглинальної сітки
- Технічне обслуговування свічки запалювання
- Очищення повітряного фільтра
- Нагострювання ланцюга пилки
- Змащування різального обладнання
- Транспортування
- Зберігання
- Технічні характеристики
- Аксесуари
- Зміст декларації відповідності ЄС
- Uvod
- Bezbednost
- Sklapanje
- Rukovanje
- Održavanje
- Transport
- Skladištenje
- Tehnički podaci
- Oprema
- Sadržaj EZ deklaracije o usaglašenosti
- Uvod
- Sigurnost
- Sastavljanje
- Rukovanje
- Održavanje
- Plan održavanja
- Svakodnevno održavanje
- Sedmično održavanje
- Mjesečno održavanje
- Godišnje održavanje
- Povremeno održavanje
- Da biste podesili brzinu u praznom hodu
- Održavanje mrežice za odvođenje iskri
- Da biste obavili radove održavanja na svjećici
- Čišćenje zračnog filtera
- Da biste naoštrili lanac pile
- Da biste podmazali opremu za rezanje
- Transport
- Skladištenje
- Tehnički podaci
- Pribor
- Sadržaj deklaracije EZ o usklađenosti
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Programa de mantenimiento
- Mantenimiento diario
- Mantenimiento semanal
- Mantenimiento mensual
- Mantenimiento anual
- Mantenimiento intermitente
- Para ajustar el régimen de ralentí
- Para realizar tareas de mantenimiento en la red apagachispas
- Para realizar tareas de mantenimiento en la bujía
- Para limpiar el filtro de aire
- Para afilar la cadena de sierra
- Para lubricar el equipo de corte
- Transporte
- Almacenamiento
- Datos técnicos
- Accesorios
- Contenido de la declaración de conformidad de CE
- Introdução
- Segurança
- Montagem
- OPERAÇÃO
- Para usar o combustível
- Antes de dar partida no motor
- Para dar partida a frio em um motor
- Para dar partida a quente em um motor
- Para dar partida no motor quando o combustível estiver muito quente
- Para interromper o funcionamento
- To use a spiked bumper
- Para derrubar uma árvore
- Para cortar um galho de uma árvore
- Para cortar um tronco
- Manutenção
- Cronograma de manutenção
- Manutenção diária
- Manutenção semanal
- Manutenção mensal
- Manutenção anual
- Manutenção Intermitente
- Para ajustar a marcha lenta
- To do maintenance on the spark arrester mesh
- Para fazer manutenção na vela de ignição
- Para limpar o filtro de ar
- Para afiar a corrente da serra
- Para lubrificar o equipamento de corte
- Transporte
- Armazenagem
- Dados técnicos
- Acessórios
- Conteúdo da declaração de conformidade da CE
- はじめに
- 安全性
- 組立
- 操作
- メンテナンス
- 搬送
- 保管
- 主要諸元
- Accessories(アクセサリー)
- EC 適合宣言の内容
To fill the fuel tank
1. Make sure that the fuel mixture is correct and that
the fuel mixture is in a fuel container with an antispill
valve.
2. If fuel is on the container, remove the unwanted fuel
and let the container dry.
3. Make sure that the area near the fuel tank cap is
clean.
4. Remove the fuel tank cap. (Fig. 44)
5. Shake the fuel container before you add the fuel
mixture to the fuel tank.
6. Put back the fuel tank cap.
To lubricate the saw chain
The product has an automatic lubrication system. Make
sure to only use the correct chain oil and obey the
instructions.
1. Use vegetable-based saw chain oil or a standard
chain oil.
2. Make sure that the area near the cap of the saw
chain oil tank is clean.
3. Remove the cap of the saw chain oil tank.
4. Fill the saw chain oil tank with the recommended
saw chain oil.
5. Put back the cap of the saw chain oil tank.
Before you start the engine
• Examine the product for missing, damaged, loose or
worn parts.
• Examine the nuts, screws and bolts.
• Examine the air filter.
• Examine the throttle trigger lockout and the throttle
control for correct operation.
• Examine the stop switch for correct operation.
• Examine the product for fuel leaks.
• Examine the saw chain sharpness and tension.
To start a cold engine
1. Move the front hand guard forward to engage the
chain brake. (Fig. 45)
2. Pull the choke control out and up.
3. Push the air purge bulb 6 times. (Fig. 46)
4. Hold the body of the product on the ground with your
left hand.
5. Put your right foot through the rear handle.
6. Pull the starter rope handle slowly with your right
hand until you feel some resistance.
7. Pull the starter rope handle with force. (Fig. 47)
CAUTION:
Do not pull the starter rope
until it stops. Do not let go of the starter
rope when it is fully extended. Release
the starter rope slowly. If you do not
obey these instructions, it can cause
damage to the engine.
Note: Do not pull the throttle trigger when you start
the engine.
8. Continue to pull the starter rope handle until the
engine starts or tries to start (pull max 3 times).
9. If the engine starts or tries to start, push the choke
control down. (Fig. 48)
10. Continue to pull until the engine starts.
11. Hold the rear handle with your right hand and the
front handle with your left hand.
12. Immediately pull the front hand guard rearward in the
direction of the front handle to disengage the chain
brake. (Fig. 27)
Note: The chain will move.
13. Run 20-30 seconds at elevated idle speed.
14. Pull the throttle trigger lightly to set normal idle.
15. Run 20-30 seconds at normal idle.
16. Use the product.
To start a warm engine
1. Move the front hand guard forward to engage the
chain brake. (Fig. 45)
2. Pull the choke control out and up.
3. Push the air purge bulb 6 times. (Fig. 46)
4. Push the choke control down. (Fig. 48)
5. Hold the body of the product on the ground with your
left hand.
6. Put your right foot through the rear handle.
7. Pull the starter rope handle slowly with your right
hand until you feel some resistance.
8. Pull the starter rope handle with force. (Fig. 47)
CAUTION:
Do not pull the starter rope
until it stops. Do not let go of the starter
rope when it is fully extended. Release
the starter rope slowly. If you do not
obey these instructions, it can cause
damage to the engine.
Note: Do not pull the throttle trigger when you start
the engine.
9. Pull the starter rope handle until the engine starts.
10. Hold the rear handle with your right hand and the
front handle with your left hand.
11. Immediately pull the front hand guard rearward in the
direction of the front handle to disengage the chain
brake. (Fig. 27)
Note:
The chain will move.
16 862 - 002 - 03.12.2018