User Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Maintenance schedule
- Daily maintenance
- Weekly maintenance
- Monthly maintenance
- Yearly maintenance
- Intermittent maintenance
- To adjust the idle speed
- To do maintenance on the spark arrester mesh
- To do maintenance on the spark plug
- To clean the air filter
- To sharpen the saw chain
- To lubricate the cutting equipment
- Transportation
- Storage
- Technical data
- Accessories
- Contents of the EC declaration of conformity
- Einleitung
- Sicherheit
- Montage
- Betrieb
- So verwenden Sie den Kraftstoff
- Vor dem Starten des Motors
- So starten Sie bei kaltem Motor
- So starten Sie einen warmen Motor
- So starten Sie den Motor, wenn der Kraftstoff zu heiß ist
- So stoppen Sie das Gerät
- So verwenden Sie eine Rindenstütze
- So fällen Sie einen Baum
- So entasten Sie einen Baum
- So zersägen Sie einen Baumstamm
- Wartung
- Transport
- Lagerung
- Technische Daten
- Zubehör
- Inhalt der EG-Konformitätserklärung
- Introduction
- Sécurité
- Montage
- Utilisation
- Entretien
- Schéma d'entretien
- Entretien quotidien
- Entretien hebdomadaire
- Entretien mensuel
- Maintenance annuelle
- Entretien périodique
- Pour régler le régime de ralenti
- Pour effectuer l'entretien de la grille pare-étincelles
- Pour effectuer l’entretien de la bougie d’allumage
- Pour nettoyer le filtre à air
- Pour affûter la chaîne de sciage
- Pour lubrifier l’équipement de coupe
- Transport
- Remisage
- Caractéristiques techniques
- Accessoires
- Contenu de la déclaration de conformité CE
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Programa de mantenimiento
- Mantenimiento diario
- Mantenimiento semanal
- Mantenimiento mensual
- Mantenimiento anual
- Mantenimiento intermitente
- Para ajustar el régimen de ralentí
- Para realizar el mantenimiento de la red apagachispas
- Para realizar el mantenimiento de la bujía
- Para limpiar el filtro de aire
- Para afilar la cadena de sierra
- Para lubricar el equipo de corte
- Transporte
- Almacenamiento
- Datos técnicos
- Accesorios
- Contenido de la declaración de conformidad CE
- Introduzione
- Sicurezza
- Definizioni di sicurezza
- Istruzioni di sicurezza generali
- Istruzioni di sicurezza per l’utilizzo
- Istruzioni di sicurezza per la manutenzione
- Montaggio
- Utilizzo
- Manutenzione
- Programma di manutenzione
- Manutenzione giornaliera
- Manutenzione settimanale
- Manutenzione mensile
- Manutenzione annuale
- Manutenzione occasionale
- Per regolare il regime minimo
- Per gli interventi di manutenzione della rete parascintille
- Per gli interventi di manutenzione della candela
- Per pulire il filtro dell'aria
- Per affilare la catena
- Per lubrificare l'attrezzatura di taglio
- Trasporto
- Rimessaggio
- Dati tecnici
- Accessori
- Contenuto della dichiarazione di conformità CE
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Transport
- Opslag
- Technische gegevens
- Accessoires
- Inhoud van de EG-verklaring van overeenstemming
- Introduktion
- Säkerhet
- Montering
- Drift
- underhåll
- Transport
- Förvaring
- Tekniska data
- Tillbehör
- Innehållet i EG-försäkran om överensstämmelse
- Innledning
- Sikkerhet
- Montering
- Bruk
- Vedlikehold
- Transport
- Oppbevaring
- Tekniske data
- Tilbehør
- Innholdet i EF-samsvarserklæringen
- Indledning
- Sikkerhed
- Montering
- Drift
- Vedligeholdelse
- Vedligeholdelsesskema
- Dagligt eftersyn
- Ugentligt eftersyn
- Månedligt eftersyn
- Årlig vedligeholdelse
- Periodisk vedligeholdelse
- Sådan justerer du tomgangshastigheden
- Sådan foretager du vedligeholdelse på gnistfangernettet.
- Sådan foretager du vedligeholdelse på tændrøret
- Rengøring af luftfilteret
- Sådan skærpes savkæden
- Sådan smøres skæreudstyret
- Transport
- Opbevaring
- Tekniske data
- Tilbehør
- Indhold i EF-overensstemmelseserklæring
- Johdanto
- Turvallisuus
- Asentaminen
- Käyttö
- Huolto
- Kuljettaminen
- Säilytys
- Tekniset tiedot
- Lisävarusteet
- EU:n vaatimustenmukaisuusvakuutus
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Esquema de manutenção
- Controle diário
- Controle semanal
- Manutenção mensal
- Manutenção anual
- Manutenção intermitente
- Ajustar o ralenti
- Realizar tarefas de manutenção na rede retentora de faíscas
- Para efetuar a manutenção da vela de ignição
- Para limpar o filtro de ar
- Para afiar a corrente da serra
- Para lubrificar o equipamento de corte
- Transporte
- Armazenamento
- Especificações técnicas
- Acessórios
- Conteúdo da declaração de conformidade CE
- Εισαγωγή
- Ασφάλεια
- Συναρμολόγηση
- Λειτουργία
- Συντήρηση
- Πρόγραμμα συντήρησης
- Καθημερινή συντήρηση
- Εβδομαδιαία συντήρηση
- Μηνιαία συντήρηση
- Ετήσια συντήρηση
- Διακεκομμένη συντήρηση
- Για να ρυθμίσετε τις στροφές ανά λεπτό ρελαντί
- Εκτέλεση εργασιών συντήρησης στη σίτα συγκράτησης των σπινθήρων
- Εκτέλεση εργασιών συντήρησης στο μπουζί
- Καθαρισμός του φίλτρου αέρα
- Ακόνισμα αλυσίδας πριονιού
- Λίπανση του εξοπλισμού κοπής
- Μεταφορά
- Αποθήκευση
- Τεχνικά στοιχεία
- Αξεσουάρ
- Περιεχόμενα της Δήλωσης Συμμόρφωσης ΕΚ
- Úvod
- Bezpečnost
- Montáž
- Provoz
- Údržba
- Přeprava
- Skladování
- Technické údaje
- Příslušenství
- Obsah prohlášení o shodě ES
- Uvod
- Sigurnost
- Sastavljanje
- Rad
- Održavanje
- Prijevoz
- Skladištenje
- Tehnički podaci
- Dodaci
- Sadržaj deklaracije o usklađenosti EZ-a
- Uvod
- Varnost
- Montaža
- Delovanje
- Vzdrževanje
- Prevoz
- Shranjevanje
- Tehnični podatki
- Dodatna oprema
- Vsebina izjave ES o skladnosti
- Wstęp
- Bezpieczeństwo
- Montaż
- Obsługa
- Przegląd
- Transport
- Przechowywanie
- Dane techniczne
- Akcesoria
- Treść deklaracji zgodności z normami WE
- Úvod
- Bezpečnosť
- Montáž
- Prevádzka
- Údržba
- Preprava
- Skladovanie
- Technické údaje
- Príslušenstvo
- Obsah vyhlásenia o zhode ES
- Bevezető
- Biztonság
- Összeszerelés
- Üzemeltetés
- Karbantartás
- Szállítás
- Tárolás
- Műszaki adatok
- Tartozékok
- Az EK-megfelelőségi nyilatkozat tartalma
- Введение
- Безопасность
- Сборка
- Эксплуатация
- Техническое обслуживание
- График технического обслуживания
- Ежедневное обслуживание
- Еженедельное обслуживание
- Ежемесячное обслуживание
- Ежегодное обслуживание
- Периодическое обслуживание
- Регулировка скорости холостого хода
- Техобслуживание искрогасительной сетки
- Техобслуживание свечи зажигания
- Очистка воздушного фильтра
- Заточка цепи пилы
- Смазка режущего оборудования
- Транспортировка
- Хранение
- Технические данные
- Принадлежности
- Содержание декларации о соответствии ЕС
- Sissejuhatus
- Ohutus
- Kokkupanek
- Töö
- Hooldamine
- Transportimine
- Hoiustamine
- Tehnilised andmed
- Lisatarvikud
- EL-i vastavusdeklaratsiooni sisu
- Įvadas
- Sauga
- Surinkimas
- Naudojimas
- Techninės priežiūros darbas
- Priežiūros grafikas
- Kasdienė techninė priežiūra
- Savaitinė techninė priežiūra
- Mėnesinė techninė priežiūra
- Kasmetinė techninė priežiūra
- Protarpiais atliekama techninė priežiūra
- Greičio tuščiąja eiga reguliavimas
- Kibirkščių sulaikymo tinklelio priežiūra
- Uždegimo žvakės priežiūra
- Kaip išvalyti oro filtrą
- Pjūklo grandinės galandimas
- Pjovimo įrangos tepimas
- Transportavimas
- Laikymas
- Techniniai duomenys
- Priedai
- EB atitikties deklaracijos turinys
- Ievads
- Drošība
- Montāža
- Lietošana
- Apkope
- Transportēšana
- Glabāšana
- Tehniskie dati
- Piederumi
- EK atbilstības deklarācijas saturs
- Въведение
- Безопасност
- Монтиране
- Експлоатация
- Поддръжка
- График за техническо обслужване
- Всекидневно обслужване
- Седмично техническо обслужване
- Месечно техническо обслужване
- Ежегодно обслужване
- Периодично обслужване
- Регулиране на оборотите на празния ход
- За техническо обслужване на искрогасителната мрежа
- Техническо обслужване на запалителната свещ
- Почистване на въздушния филтър
- Заточване на веригата за моторен трион
- Смазване на режещото оборудване
- Транспортиране
- Съхранение
- Технически данни
- Принадлежности
- Съдържание на ЕО декларацията за съответствие
- Introducere
- Siguranţă
- Definiţii privind siguranţa
- Instrucțiuni generale de siguranță
- Instrucțiuni de siguranță pentru utilizare
- Instrucțiuni de siguranță pentru întreținere
- Asamblarea
- Funcționarea
- Pentru utilizarea carburantului
- Înainte de pornirea motorului
- Pentru pornirea unui motor rece
- Pentru pornirea unui motor cald
- Pentru a porni motorul când carburantul este prea fierbinte
- Pentru oprire
- Utilizarea unei bare de protecție
- Pentru a doborî un copac
- Tăierea ramurilor unui arbore
- Ferăstruirea unui buștean
- Întreținerea
- Program de întreţinere
- Întreținerea zilnică
- Întreținerea săptămânală
- Întreținerea lunară
- Întreținerea anuală
- Întreţinere intermitentă
- Pentru reglarea turaţiei de mers în gol
- Pentru a efectua operații de întreținere la sita parascântei
- Pentru a efectua operații de întreținere a bujiei
- Pentru a curăța filtrul de aer
- Pentru ascuţirea lanţului de ferăstrău
- Pentru a unge echipamentul de tăiere
- Transportul
- Depozitarea
- Date tehnice
- Accesorii
- Conținutul declarației de conformitate CE
- Giriş
- Güvenlik
- Montaj
- Kullanım
- Bakım
- Taşıma
- Saklama
- Teknik veriler
- Aksesuarlar
- AB uyumluluk bildiriminin içeriği
- Вступ
- Безпека
- Збирання
- Експлуатація
- Технічне обслуговування
- Графік технічного обслуговування
- Щоденне технічне обслуговування
- Щотижневе технічне обслуговування
- Щомісячне технічне обслуговування
- Щорічне обслуговування
- Періодичне технічне обслуговування
- Налаштування швидкості холостого ходу
- Технічне обслуговування іскропоглинальної сітки
- Технічне обслуговування свічки запалювання
- Очищення повітряного фільтра
- Нагострювання ланцюга пилки
- Змащування різального обладнання
- Транспортування
- Зберігання
- Технічні характеристики
- Аксесуари
- Зміст декларації відповідності ЄС
- Uvod
- Bezbednost
- Sklapanje
- Rukovanje
- Održavanje
- Transport
- Skladištenje
- Tehnički podaci
- Oprema
- Sadržaj EZ deklaracije o usaglašenosti
- Uvod
- Sigurnost
- Sastavljanje
- Rukovanje
- Održavanje
- Plan održavanja
- Svakodnevno održavanje
- Sedmično održavanje
- Mjesečno održavanje
- Godišnje održavanje
- Povremeno održavanje
- Da biste podesili brzinu u praznom hodu
- Održavanje mrežice za odvođenje iskri
- Da biste obavili radove održavanja na svjećici
- Čišćenje zračnog filtera
- Da biste naoštrili lanac pile
- Da biste podmazali opremu za rezanje
- Transport
- Skladištenje
- Tehnički podaci
- Pribor
- Sadržaj deklaracije EZ o usklađenosti
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Programa de mantenimiento
- Mantenimiento diario
- Mantenimiento semanal
- Mantenimiento mensual
- Mantenimiento anual
- Mantenimiento intermitente
- Para ajustar el régimen de ralentí
- Para realizar tareas de mantenimiento en la red apagachispas
- Para realizar tareas de mantenimiento en la bujía
- Para limpiar el filtro de aire
- Para afilar la cadena de sierra
- Para lubricar el equipo de corte
- Transporte
- Almacenamiento
- Datos técnicos
- Accesorios
- Contenido de la declaración de conformidad de CE
- Introdução
- Segurança
- Montagem
- OPERAÇÃO
- Para usar o combustível
- Antes de dar partida no motor
- Para dar partida a frio em um motor
- Para dar partida a quente em um motor
- Para dar partida no motor quando o combustível estiver muito quente
- Para interromper o funcionamento
- To use a spiked bumper
- Para derrubar uma árvore
- Para cortar um galho de uma árvore
- Para cortar um tronco
- Manutenção
- Cronograma de manutenção
- Manutenção diária
- Manutenção semanal
- Manutenção mensal
- Manutenção anual
- Manutenção Intermitente
- Para ajustar a marcha lenta
- To do maintenance on the spark arrester mesh
- Para fazer manutenção na vela de ignição
- Para limpar o filtro de ar
- Para afiar a corrente da serra
- Para lubrificar o equipamento de corte
- Transporte
- Armazenagem
- Dados técnicos
- Acessórios
- Conteúdo da declaração de conformidade da CE
- はじめに
- 安全性
- 組立
- 操作
- メンテナンス
- 搬送
- 保管
- 主要諸元
- Accessories(アクセサリー)
- EC 適合宣言の内容
12. Wait 10-15 seconds.
13. Pull the throttle trigger lightly to set normal idle.
14. Use the product.
To start the engine when the fuel is
too hot
If the product does not start, the fuel can be too hot.
Note: Always use new fuel and decrease the operation
time during warm weather.
1. Put the product in a cool area away from open
sunlight.
2. Let the product cool down for 20 minutes at
minimum.
3. Press the air purge bulb again and again for 10-15
seconds.
4. Obey the procedure to start a cold engine. Refer to
To start a cold engine on page 16
.
To stop
• Push the stop switch to stop the engine.
Note: The stop switch automatically goes back to its
initial position.
To use a spiked bumper
A spiked bumper holds the wood as you cut. The spiked
bumper is a pivot between the engine body and the
guide bar.
1. Put the lower end of the spiked bumper at the
correct felling hinge width.
2. Push against the front handle with your left hand and
lift the rear handle with your right hand.
3. Cut until you get the correct felling hinge width.
Note:
The felling hinge must have an equal
thickness.
4. Cut more than half of the diameter and then put the
felling wedge into the saw cut.
To fell a tree
1. Remove dirt, stones, loose bark, nails, staples and
wire from the tree.
2. Make a notch 1/3 the diameter of the tree,
perpendicular to the direction of the fall. (Fig. 49)
3. Make the lower horizontal notch cut. This helps
prevent pinching the saw chain or the guide bar
when the second notch is made.
4. Make the felling back cut (X) a minimum of 50 mm (2
in) higher than the horizontal notch cut. Keep the
felling back cut parallel to the horizontal notching cut
so sufficient wood is left to be a hinge. Do not cut
through the hinge. The hinge wood keeps the tree
from twisting and falling in the incorrect direction.
(Fig. 50) and (Fig. 51)
5. As the felling back cut nears the hinge, the tree
starts to fall. Make sure that the tree can fall in the
correct direction and not rock rearward and pinch the
saw chain. Stop the cut before the felling back cut is
complete to prevent this. Use wedges of wood or
plastic to open the cut and let the tree fall along the
necessary line of fall. (Fig. 52)
6. When the tree starts to fall, remove the product from
the cut. Stop the motor, put the product down and
use the planned escape path. Be careful of limbs
falling from above and monitor your footing. (Fig. 53)
To limb a tree
1. Use larger limbs to hold the log off the ground.
2. Remove small limbs in one cut. (Fig. 54)
3. Cut branches that have tension from the bottom to
the top to prevent pinching the saw chain or the
guide bar.
To buck a log
CAUTION: Do not let the saw chain touch
the ground.
• If the log has support along its full length, cut from
the top of the log (known as overbucking). (Fig. 55)
• If the log has support on one end, cut 1/3 the
diameter from below the log (known as
underbucking).
• If the log has support on the two ends, cut 1/3 the
diameter from the top. Complete the cut by
underbucking the lower 2/3 of the log to touch the
first cut. (Fig. 56)
• If you buck a log on a slope, always stay on the
uphill side of the log. Cut through the log while you
keep complete control of the product. Then release
the cutting pressure near the end of the cut while
tightly holding the rear handle and front handle. (Fig.
57)
Maintenance
WARNING: Read and understand the safety
chapter before you clean, repair or do
maintenance on the product.
Maintenance schedule
Make sure that you obey the maintenance schedule.
The intervals are calculated from daily use of the
product. The intervals are different if you do not use the
862 - 002 - 03.12.2018 17