User Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Transportation, storage and disposal
- Technical data
- EC Declaration of Conformity
- مقدمة
- السلامة
- التجميع
- التشغيل
- الصيانة
- النقل والتخزين وطريقة التخلص من المنتج
- البيانات الفنية
- بيان التوافق مع توجيهات الاتحاد الأوروبي (EC)
- Въведение
- Безопасност
- Монтиране
- Операция
- Поддръжка
- Въведение
- Редовен сервиз и инспекция
- Поддръжка на уредите от клас на запрашаване L
- За да изпразните контейнера за отпадъци след засмукване на течности
- За да изпразните контейнера за отпадъци след сухо засмукване
- За да почистите филтъра, използвайте почистващата система на филтъра
- За външно почистване на машината
- За смяна на филтъра
- За да подмените торбичката за прах
- Транспортиране, съхранение и изхвърляне
- Технически характеристики
- Декларация за съответствие на ЕО
- Úvod
- Bezpečnost
- Montáž
- Provoz
- Údržba
- Přeprava, skladování a likvidace
- Technické údaje
- ES Prohlášení o shodě
- Indledning
- Sikkerhed
- Montering
- Drift
- Vedligeholdelse
- Indledning
- Regelmæssig vedligeholdelse og eftersyn
- Vedligeholdelse af Støvklasse L-produkter
- Sådan tømmes støvbeholderen efter opsamling af væsker
- Sådan tømmes støvbeholderen efter opsamling af tørt materiale
- Sådan rengøres filteret, filterrensesystem
- Sådan rengøres produktet udvendigt
- Sådan udskiftes filteret
- Sådan udskiftes filterposen
- Transport, opbevaring og bortskaffelse
- Tekniske data
- EU-overensstemmelseserklæring
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Wartung
- Einleitung
- Regelmäßige Wartung und Inspektion
- Wartung von Geräten der Staubklasse L
- Entleerung des Schmutzbehälters nach dem Aufsaugen von Flüssigkeiten
- Entleeren des Schmutzbehälters nach dem Aufsaugen von trockenem Material
- Reinigen des Filters, Filter-Reinigungssystem
- So reinigen Sie das Gerät außen
- Austausch des Filters
- Austausch des Filterbeutels
- Transport, Lagerung und Entsorgung
- Technische Angaben
- EG-Konformitätserklärung
- Εισαγωγή
- Ασφάλεια
- Συναρμολόγηση
- Λειτουργία
- Συντήρηση
- Εισαγωγή
- Τακτική συντήρηση και επιθεώρηση
- Συντήρηση των προϊόντων σκόνης κατηγορίας L
- Άδειασμα του δοχείου ακαθαρσιών μετά την αναρρόφηση υγρών υλικών
- Άδειασμα του δοχείου ακαθαρσιών μετά την αναρρόφηση στερών υλικών
- Καθαρισμός του φίλτρου και του συστήματος καθαρισμού του φίλτρου
- Εξωτερικός καθαρισμός του προϊόντος
- Αντικατάσταση του φίλτρου
- Αντικατάσταση του φιλτρόσακου
- Μεταφορά, αποθήκευση και απόρριψη
- Τεχνικά στοιχεία
- Δήλωση Συμμόρφωσης ΕΚ
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Introducción
- Mantenimiento e inspección periódicos
- Mantenimiento de productos para polvo de clase L
- Vaciado del depósito de suciedad después de aspirar líquido
- Vaciado del depósito de suciedad después de aspirar material seco
- Limpieza del filtro y el sistema de limpieza del filtro
- Para limpiar el producto externamente
- Cambio del filtro
- Cambio de la bolsa filtrante
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Declaración CE de conformidad
- Sissejuhatus
- Ohutus
- Kokkupanek
- Töö
- Hooldamine
- Transportimine, hoiulepanek ja utiliseerimine
- Tehnilised andmed
- EÜ vastavusdeklaratsioon
- Johdanto
- Turvallisuus
- Asentaminen
- Toiminta
- Huolto
- Johdanto
- Säännöllinen huolto ja tarkastus
- Pölyluokan L tuotteiden huolto
- Säiliön tyhjentäminen nesteen imuroinnin jälkeen
- Säiliön tyhjentäminen kuivien materiaalien imuroinnin jälkeen
- Suodattimen puhdistaminen, suodatinpuhdistusjärjestelmä
- Laitteen puhdistaminen ulkopuolelta
- Suodattimen vaihtaminen
- Suodatinpussin vaihtaminen
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- EY-vaatimustenmukaisuusvakuutus
- Introduction
- Sécurité
- Montage
- Utilisation
- Entretien
- Introduction
- Entretien et inspection réguliers
- Entretien des produits de classe de filtration L
- Pour vider le réservoir à saletés après l'aspiration de liquides
- Pour vider le réservoir à saletés après l'aspiration de substances sèches
- Pour nettoyer le filtre, système de nettoyage de filtre
- Pour nettoyer la partie extérieure du produit
- Pour remplacer le filtre
- Pour remplacer le sac filtrant
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Déclaration de conformité CE
- Uvod
- Sigurnost
- Sastavljanje
- Rad
- Održavanje
- Prijevoz, spremanje i zbrinjavanje
- Tehnički podaci
- Izjava o sukladnosti EC
- Bevezető
- Biztonság
- Összeszerelés
- Üzemeltetés
- Karbantartás
- Szállítás, tárolás és ártalmatlanítás
- Műszaki adatok
- EK megfelelőségi nyilatkozat
- Introduzione
- Sicurezza
- Montaggio
- Funzionamento
- Manutenzione
- Introduzione
- Ispezione e interventi di manutenzione periodici
- Manutenzione dei prodotti con polvere classe L
- Svuotamento del contenitore della sporcizia dopo il prelievo del liquido
- Svuotamento del contenitore della sporcizia dopo il prelievo a secco
- Pulizia del filtro, sistema di pulizia del filtro
- Pulizia esterna del prodotto
- Sostituzione del filtro
- Sostituzione della cartuccia del filtro
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Dichiarazione CE di conformità
- はじめに
- 安全性
- 組立
- 操作
- メンテナンス
- 搬送、保管、廃棄
- 主要諸元
- EC 適合性宣言
- 서문
- 안전성
- 조립
- 작동
- 유지 보수
- 운송, 보관 및 폐기
- 기술 정보
- EU 준수 선언문
- Įvadas
- Sauga
- Surinkimas
- Naudojimas
- Techninės priežiūros darbas
- Įvadas
- Reguliari priežiūra ir tikrinimas.
- L klasės dulkių siurbimo gaminių techninė priežiūra
- Nešvarumų talpyklos ištuštinimas po skysčio siurbimo
- Nešvarumų talpyklos ištuštinimas po sausų medžiagų siurbimo
- Filtro ir filtro valymo sistemos valymas
- Gaminio valymas iš išorės
- Filtro keitimas
- Filtro maišelio keitimas
- Transportavimas, saugojimas ir utilizavimas
- Techniniai duomenys
- EB atitikties deklaracija
- Ievads
- Drošība
- Montāža
- Lietošana
- Apkope
- Pārvadāšana, glabāšana un utilizēšana
- Tehniskie dati
- EK atbilstības deklarācija
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Inleiding
- Regelmatig onderhoud en regelmatige inspectie
- Onderhoud van producten met stofklasse L
- De vuilcontainer leegmaken nadat vloeistof is opgezogen
- De vuilcontainer legen na het opzuigen van droog materiaal
- Het filter reinigen, filterreinigingssysteem
- Product aan de buitenkant reinigen
- Het filter vervangen
- De filterzak vervangen
- Vervoer, opslag en verwerking
- Technische gegevens
- EG-conformiteitsverklaring
- Innledning
- Sikkerhet
- Montering
- Bruk
- Vedlikehold
- Innledning
- Regelmessig service og inspeksjon
- Vedlikehold av produkter i støvklasse L
- Slik tømmer du støvbeholderen etter innsamling av væsker
- Slik tømmer du støvbeholderen etter tørrengjøring
- Slik rengjør du filteret og filterrengjøringssystemet
- Slik rengjør du produktet på utsiden
- Slik skifter du filteret
- Slik skifter du ut filterposen
- Transport, oppbevaring og avhending
- Tekniske data
- EF-samsvarserklæring
- Wstęp
- Bezpieczeństwo
- Montaż
- Obsługa
- Przegląd
- Wstęp
- Regularny serwis i kontrola
- Konserwacja produktów do odkurzania pyłu klasy L
- Opróżnianie pojemnika na kurz i brud po wciągnięciu cieczy
- Opróżnianie pojemnika na kurz i brud po wciągnięciu suchego materiału
- Czyszczenie filtra, system czyszczenia filtra
- Czyszczenie produktu od zewnątrz
- Wymiana filtra
- Wymiana worka filtracyjnego
- Transport, przechowywanie i utylizacja
- Dane techniczne
- Deklaracja zgodności WE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Introdução
- Manutenção e inspeção regular
- Manutenção de produtos de poeiras da classe L
- Esvaziar o recipiente de resíduos após a limpeza de líquidos
- Esvaziar o recipiente de resíduos após a limpeza de resíduos secos
- Limpar o filtro, sistema de limpeza de filtros
- Para limpar o produto externamente
- Substituir o filtro
- Substituir o saco de filtro
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Declaração CE de conformidade
- Introducere
- Siguranţă
- Asamblarea
- Funcţionarea
- Întreținerea
- Introducere
- Service și inspecție periodice
- Întreținerea produselor din clasa de praf L
- Pentru a goli recipientul pentru murdărie după aspirarea de lichid
- Golirea recipientului pentru murdărie după aspirarea uscată
- Curățarea filtrului, sistem de curățare a filtrului
- Pentru a curăța produsul la exterior
- Înlocuirea filtrului
- Înlocuirea sacului filtrului
- Transportul, depozitarea şi eliminarea
- Date tehnice
- Declarație de conformitate CE
- Введение
- Безопасность
- Сборка
- Эксплуатация
- Техническое обслуживание
- Транспортировка, хранение и утилизация
- Технические данные
- Декларация соответствия ЕС
- Úvod
- Bezpečnosť
- Montáž
- Prevádzka
- Údržba
- Úvod
- Pravidelný servis a kontrola
- Údržba výrobkov určených pre prach triedy L
- Vyprázdnenie nádoby na nečistoty po vysávaní kvapalín
- Vyprázdnenie nádoby na nečistoty po vysávaní suchého materiálu
- Čistenie filtra, systém čistenia filtra
- Čistenie externých povrchov výrobku
- Výmena filtra
- Výmena filtračného vrecka
- Preprava, skladovanie a likvidácia
- Technické údaje
- ES vyhlásenie o zhode
- Uvod
- Varnost
- Montaža
- Delovanje
- Vzdrževanje
- Transport skladiščenje in odstranitev
- Tehnični podatki
- Izjava ES o skladnosti
- Uvod
- Bezbednost
- Sklapanje
- Rukovanje
- Održavanje
- Transport, skladištenje i odlaganje
- Tehnički podaci
- EZ deklaracija o usaglašenosti
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Transport, förvaring och kassering
- Tekniska data
- EG‐försäkran om överensstämmelse
- Giriş
- Güvenlik
- Montaj
- Kullanım
- Bakım
- Taşıma, depolama ve atma
- Teknik veriler
- AT Uyumluluk Bildirimi
- Вступ
- Безпека
- Збирання
- Експлуатація
- ТЕХНІЧНЕ ОБСЛУГОВУВАННЯ
- Вступ
- Регулярне обслуговування й перевірка
- Технічне обслуговування виробів, розрахованих на збирання пилу класу L
- Спорожнення контейнера для бруду після збирання рідини
- Спорожнення контейнера для бруду після збирання сухого сміття
- Очищення фільтра, система очищення фільтрів
- Чищення зовнішніх поверхонь виробу
- Заміна фільтра
- Заміна мішкового фільтра
- Транспортування, зберігання й утилізація
- Технічні дані
- Декларація відповідності ЄС
- 简介
- 安全性
- 组装
- 操作
- 维护
- 运输、存放和废弃处理
- 技术参数
- 欧盟一致性声明
To install the tube holder
1. Move the tube holder vertically on the extension
tube.
2. Use a screwdriver to install the tube holder on
correct height of the extension tube. (Fig. 19)
3. Park the extension tube at the holders on the rear of
the product. (Fig. 20)
Operation
Introduction
WARNING: Before you operate the product,
you must read and understand the safety
chapter.
To start the product
Before the product is used, make sure that the
frequency and voltage shown on the rating plate is the
same as the mains voltage.
1. Make sure that the main switch is in position "0".
(Fig. 10)
2. Do a check that correct filters are in position in the
product.
3. Put the hose into the vacuum inlet at the front of the
product. Push the hose forward until it is installed
tightly in position in the vacuum inlet. (Fig. 16)
4. Connect the two extension tubes with the handle.
Twist the extension tubes to make sure that they are
correctly in position.
5. Attach a nozzle to the extension tube. Select the
nozzle after the type of material that is to be cleaned.
6. Connect the plug into the mains.
7. Put the main switch into position "I" to start the
product. (Fig. 17)
To stop the product
1. Put the main switch into position "0" to stop the
product.
2. Disconnect the plug from the mains. (Fig. 10)
To use the blow function
1. Put the hose in the opening on the rear of the
product. (Fig. 21)
2. Connect the plug into the mains.
3. Put the main switch to the "I" position. (Fig. 17)
4. Adjust the blow power on the handle or by the main
switch*. *Only on some models. (Fig. 22)
To use the power tool socket*
*Only on some models.
CAUTION:
Follow the operating instructions
and safety instructions for appliances
connected to the power tool socket.
Note: The maximum power consumption of the
connected tool is told in section
Technical data on page
16
.
1. Make sure that the switch on the power tool is in
position "0". (Fig. 23)
2. Disconnect the handle from the hose. Press the
hatches on the hose end (A) and pull out the handle
(B). (Fig. 24)
3. Connect the power tool adaptor. (Fig. 25)
4. Adjust the suction power on the power tool adaptor
or by the main switch*. *Only on some models. (Fig.
26)
5. Connect the hose to the vacuum inlet of the product
and to the power tool. Connect the cable of the
power tool to the electrical connection of the product.
(Fig. 27)
6. Make sure that the switch on the power tool is in
position "0". (Fig. 23)
7. Turn the main switch on the product to the power
tool position (A).
8. Put the switch of the power tool to "I" (B). (Fig. 28)
Note: You can start and stop the product with the
main switch on the product (A) or on the power tool
(B).
To clean liquid
Note: The product has a float system that stops the
airflow through the product at the maximum liquid level.
CAUTION: Do not clean liquid without the
float system in position.
1. Make sure that the filter and the filter tension (the
float system) is in position, see
To replace the filter
on page 15
. Remove the filter bag if it is installed.
2. Use the floor nozzle to clean liquid.
3. At the maximum liquid level, a noticeable change of
the motor sound is heard. The suction power
decreases.
4. Stop the product, see
To stop the product on page
13
.
5. Empty the dirt container, see
To empty the dirt
container after liquid pick up on page 14
.
562 - 004 - 20.03.2019
13