User Manual
Table Of Contents
- Contents
- Introduction
- Safety
- Assembly
- Operation
- Maintenance
- Transportation, storage and disposal
- Technical data
- EC Declaration of Conformity
- مقدمة
- السلامة
- التجميع
- التشغيل
- الصيانة
- النقل والتخزين وطريقة التخلص من المنتج
- البيانات الفنية
- بيان التوافق مع توجيهات الاتحاد الأوروبي (EC)
- Въведение
- Безопасност
- Монтиране
- Операция
- Поддръжка
- Въведение
- Редовен сервиз и инспекция
- Поддръжка на уредите от клас на запрашаване L
- За да изпразните контейнера за отпадъци след засмукване на течности
- За да изпразните контейнера за отпадъци след сухо засмукване
- За да почистите филтъра, използвайте почистващата система на филтъра
- За външно почистване на машината
- За смяна на филтъра
- За да подмените торбичката за прах
- Транспортиране, съхранение и изхвърляне
- Технически характеристики
- Декларация за съответствие на ЕО
- Úvod
- Bezpečnost
- Montáž
- Provoz
- Údržba
- Přeprava, skladování a likvidace
- Technické údaje
- ES Prohlášení o shodě
- Indledning
- Sikkerhed
- Montering
- Drift
- Vedligeholdelse
- Indledning
- Regelmæssig vedligeholdelse og eftersyn
- Vedligeholdelse af Støvklasse L-produkter
- Sådan tømmes støvbeholderen efter opsamling af væsker
- Sådan tømmes støvbeholderen efter opsamling af tørt materiale
- Sådan rengøres filteret, filterrensesystem
- Sådan rengøres produktet udvendigt
- Sådan udskiftes filteret
- Sådan udskiftes filterposen
- Transport, opbevaring og bortskaffelse
- Tekniske data
- EU-overensstemmelseserklæring
- Einleitung
- Sicherheit
- Montage
- Betrieb
- Wartung
- Einleitung
- Regelmäßige Wartung und Inspektion
- Wartung von Geräten der Staubklasse L
- Entleerung des Schmutzbehälters nach dem Aufsaugen von Flüssigkeiten
- Entleeren des Schmutzbehälters nach dem Aufsaugen von trockenem Material
- Reinigen des Filters, Filter-Reinigungssystem
- So reinigen Sie das Gerät außen
- Austausch des Filters
- Austausch des Filterbeutels
- Transport, Lagerung und Entsorgung
- Technische Angaben
- EG-Konformitätserklärung
- Εισαγωγή
- Ασφάλεια
- Συναρμολόγηση
- Λειτουργία
- Συντήρηση
- Εισαγωγή
- Τακτική συντήρηση και επιθεώρηση
- Συντήρηση των προϊόντων σκόνης κατηγορίας L
- Άδειασμα του δοχείου ακαθαρσιών μετά την αναρρόφηση υγρών υλικών
- Άδειασμα του δοχείου ακαθαρσιών μετά την αναρρόφηση στερών υλικών
- Καθαρισμός του φίλτρου και του συστήματος καθαρισμού του φίλτρου
- Εξωτερικός καθαρισμός του προϊόντος
- Αντικατάσταση του φίλτρου
- Αντικατάσταση του φιλτρόσακου
- Μεταφορά, αποθήκευση και απόρριψη
- Τεχνικά στοιχεία
- Δήλωση Συμμόρφωσης ΕΚ
- Introducción
- Seguridad
- Montaje
- Funcionamiento
- Mantenimiento
- Introducción
- Mantenimiento e inspección periódicos
- Mantenimiento de productos para polvo de clase L
- Vaciado del depósito de suciedad después de aspirar líquido
- Vaciado del depósito de suciedad después de aspirar material seco
- Limpieza del filtro y el sistema de limpieza del filtro
- Para limpiar el producto externamente
- Cambio del filtro
- Cambio de la bolsa filtrante
- Transporte, almacenamiento y eliminación
- Datos técnicos
- Declaración CE de conformidad
- Sissejuhatus
- Ohutus
- Kokkupanek
- Töö
- Hooldamine
- Transportimine, hoiulepanek ja utiliseerimine
- Tehnilised andmed
- EÜ vastavusdeklaratsioon
- Johdanto
- Turvallisuus
- Asentaminen
- Toiminta
- Huolto
- Johdanto
- Säännöllinen huolto ja tarkastus
- Pölyluokan L tuotteiden huolto
- Säiliön tyhjentäminen nesteen imuroinnin jälkeen
- Säiliön tyhjentäminen kuivien materiaalien imuroinnin jälkeen
- Suodattimen puhdistaminen, suodatinpuhdistusjärjestelmä
- Laitteen puhdistaminen ulkopuolelta
- Suodattimen vaihtaminen
- Suodatinpussin vaihtaminen
- Kuljettaminen, säilyttäminen ja hävittäminen
- Tekniset tiedot
- EY-vaatimustenmukaisuusvakuutus
- Introduction
- Sécurité
- Montage
- Utilisation
- Entretien
- Introduction
- Entretien et inspection réguliers
- Entretien des produits de classe de filtration L
- Pour vider le réservoir à saletés après l'aspiration de liquides
- Pour vider le réservoir à saletés après l'aspiration de substances sèches
- Pour nettoyer le filtre, système de nettoyage de filtre
- Pour nettoyer la partie extérieure du produit
- Pour remplacer le filtre
- Pour remplacer le sac filtrant
- Transport, entreposage et mise au rebut
- Caractéristiques techniques
- Déclaration de conformité CE
- Uvod
- Sigurnost
- Sastavljanje
- Rad
- Održavanje
- Prijevoz, spremanje i zbrinjavanje
- Tehnički podaci
- Izjava o sukladnosti EC
- Bevezető
- Biztonság
- Összeszerelés
- Üzemeltetés
- Karbantartás
- Szállítás, tárolás és ártalmatlanítás
- Műszaki adatok
- EK megfelelőségi nyilatkozat
- Introduzione
- Sicurezza
- Montaggio
- Funzionamento
- Manutenzione
- Introduzione
- Ispezione e interventi di manutenzione periodici
- Manutenzione dei prodotti con polvere classe L
- Svuotamento del contenitore della sporcizia dopo il prelievo del liquido
- Svuotamento del contenitore della sporcizia dopo il prelievo a secco
- Pulizia del filtro, sistema di pulizia del filtro
- Pulizia esterna del prodotto
- Sostituzione del filtro
- Sostituzione della cartuccia del filtro
- Trasporto, stoccaggio e smaltimento
- Dati tecnici
- Dichiarazione CE di conformità
- はじめに
- 安全性
- 組立
- 操作
- メンテナンス
- 搬送、保管、廃棄
- 主要諸元
- EC 適合性宣言
- 서문
- 안전성
- 조립
- 작동
- 유지 보수
- 운송, 보관 및 폐기
- 기술 정보
- EU 준수 선언문
- Įvadas
- Sauga
- Surinkimas
- Naudojimas
- Techninės priežiūros darbas
- Įvadas
- Reguliari priežiūra ir tikrinimas.
- L klasės dulkių siurbimo gaminių techninė priežiūra
- Nešvarumų talpyklos ištuštinimas po skysčio siurbimo
- Nešvarumų talpyklos ištuštinimas po sausų medžiagų siurbimo
- Filtro ir filtro valymo sistemos valymas
- Gaminio valymas iš išorės
- Filtro keitimas
- Filtro maišelio keitimas
- Transportavimas, saugojimas ir utilizavimas
- Techniniai duomenys
- EB atitikties deklaracija
- Ievads
- Drošība
- Montāža
- Lietošana
- Apkope
- Pārvadāšana, glabāšana un utilizēšana
- Tehniskie dati
- EK atbilstības deklarācija
- Inleiding
- Veiligheid
- Montage
- Werking
- Onderhoud
- Inleiding
- Regelmatig onderhoud en regelmatige inspectie
- Onderhoud van producten met stofklasse L
- De vuilcontainer leegmaken nadat vloeistof is opgezogen
- De vuilcontainer legen na het opzuigen van droog materiaal
- Het filter reinigen, filterreinigingssysteem
- Product aan de buitenkant reinigen
- Het filter vervangen
- De filterzak vervangen
- Vervoer, opslag en verwerking
- Technische gegevens
- EG-conformiteitsverklaring
- Innledning
- Sikkerhet
- Montering
- Bruk
- Vedlikehold
- Innledning
- Regelmessig service og inspeksjon
- Vedlikehold av produkter i støvklasse L
- Slik tømmer du støvbeholderen etter innsamling av væsker
- Slik tømmer du støvbeholderen etter tørrengjøring
- Slik rengjør du filteret og filterrengjøringssystemet
- Slik rengjør du produktet på utsiden
- Slik skifter du filteret
- Slik skifter du ut filterposen
- Transport, oppbevaring og avhending
- Tekniske data
- EF-samsvarserklæring
- Wstęp
- Bezpieczeństwo
- Montaż
- Obsługa
- Przegląd
- Wstęp
- Regularny serwis i kontrola
- Konserwacja produktów do odkurzania pyłu klasy L
- Opróżnianie pojemnika na kurz i brud po wciągnięciu cieczy
- Opróżnianie pojemnika na kurz i brud po wciągnięciu suchego materiału
- Czyszczenie filtra, system czyszczenia filtra
- Czyszczenie produktu od zewnątrz
- Wymiana filtra
- Wymiana worka filtracyjnego
- Transport, przechowywanie i utylizacja
- Dane techniczne
- Deklaracja zgodności WE
- Introdução
- Segurança
- Montagem
- Funcionamento
- Manutenção
- Introdução
- Manutenção e inspeção regular
- Manutenção de produtos de poeiras da classe L
- Esvaziar o recipiente de resíduos após a limpeza de líquidos
- Esvaziar o recipiente de resíduos após a limpeza de resíduos secos
- Limpar o filtro, sistema de limpeza de filtros
- Para limpar o produto externamente
- Substituir o filtro
- Substituir o saco de filtro
- Transporte, armazenamento e eliminação
- Especificações técnicas
- Declaração CE de conformidade
- Introducere
- Siguranţă
- Asamblarea
- Funcţionarea
- Întreținerea
- Introducere
- Service și inspecție periodice
- Întreținerea produselor din clasa de praf L
- Pentru a goli recipientul pentru murdărie după aspirarea de lichid
- Golirea recipientului pentru murdărie după aspirarea uscată
- Curățarea filtrului, sistem de curățare a filtrului
- Pentru a curăța produsul la exterior
- Înlocuirea filtrului
- Înlocuirea sacului filtrului
- Transportul, depozitarea şi eliminarea
- Date tehnice
- Declarație de conformitate CE
- Введение
- Безопасность
- Сборка
- Эксплуатация
- Техническое обслуживание
- Транспортировка, хранение и утилизация
- Технические данные
- Декларация соответствия ЕС
- Úvod
- Bezpečnosť
- Montáž
- Prevádzka
- Údržba
- Úvod
- Pravidelný servis a kontrola
- Údržba výrobkov určených pre prach triedy L
- Vyprázdnenie nádoby na nečistoty po vysávaní kvapalín
- Vyprázdnenie nádoby na nečistoty po vysávaní suchého materiálu
- Čistenie filtra, systém čistenia filtra
- Čistenie externých povrchov výrobku
- Výmena filtra
- Výmena filtračného vrecka
- Preprava, skladovanie a likvidácia
- Technické údaje
- ES vyhlásenie o zhode
- Uvod
- Varnost
- Montaža
- Delovanje
- Vzdrževanje
- Transport skladiščenje in odstranitev
- Tehnični podatki
- Izjava ES o skladnosti
- Uvod
- Bezbednost
- Sklapanje
- Rukovanje
- Održavanje
- Transport, skladištenje i odlaganje
- Tehnički podaci
- EZ deklaracija o usaglašenosti
- Introduktion
- Säkerhet
- Montering
- Drift
- Underhåll
- Transport, förvaring och kassering
- Tekniska data
- EG‐försäkran om överensstämmelse
- Giriş
- Güvenlik
- Montaj
- Kullanım
- Bakım
- Taşıma, depolama ve atma
- Teknik veriler
- AT Uyumluluk Bildirimi
- Вступ
- Безпека
- Збирання
- Експлуатація
- ТЕХНІЧНЕ ОБСЛУГОВУВАННЯ
- Вступ
- Регулярне обслуговування й перевірка
- Технічне обслуговування виробів, розрахованих на збирання пилу класу L
- Спорожнення контейнера для бруду після збирання рідини
- Спорожнення контейнера для бруду після збирання сухого сміття
- Очищення фільтра, система очищення фільтрів
- Чищення зовнішніх поверхонь виробу
- Заміна фільтра
- Заміна мішкового фільтра
- Транспортування, зберігання й утилізація
- Технічні дані
- Декларація відповідності ЄС
- 简介
- 安全性
- 组装
- 操作
- 维护
- 运输、存放和废弃处理
- 技术参数
- 欧盟一致性声明
Maintenance
Introduction
WARNING: Before you do maintenance, you
must read and understand the safety
chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
Regular service and inspection
• Regular service and inspection of the product must
be done by qualified personnel referring to related
legislation and regulations.
• Electrical tests for ground continuity, insulation
resistance, and condition of the flexible cord must be
done frequently.
• If a defect is found, the product must be removed
from service and repaired by an approved service
technician.
Maintenance of Dust Class L products
The following applies for Dust Class L products, WDC
325L.
• During maintenance and cleaning, use the product
safely for maintenance personnel or other persons.
• In the maintenance area:
• Use filtered mandatory airflow.
• Use protective clothing.
• Clean the maintenance area so that no harmful
material get out in other areas.
• If the parts can not be cleaned satisfactorily during
maintenance and repair:
• Put the parts in correctly sealed bags.
• Discard the parts referring to legal regulations.
To empty the dirt container after liquid
pick up
1. Stop the product, see
To stop the product on page
13
.
2. Disconnect the hose from the vacuum inlet by pulling
out the hose.
3. Unlock the clasps and lift off the motor unit. (Fig. 8)
4. Empty the dirt container by tilting it rearward and put
the liquids into a floor drain. * Handle only on some
models. (Fig. 29)
CAUTION:
Always empty and clean the
dirt container and the float system after
liquid pick up. Do not pick up liquid
without the float system and filter
installed in the product.
5. Put the motor unit on the dirt container and lock the
clasps. (Fig. 12)
To empty the dirt container after dry
pick up
1. Stop the product, see
To stop the product on page
13
.
2. Unlock the clasps and lift off the motor unit. (Fig. 8)
3. Do a check to see if the filter bag is full.
4. Remove the filter bag if it is full.
CAUTION: Do not pick up dry material
without the filter and the filter bag in
position.
5. Install a new filter bag, see
To install the filter bag on
page 12
.
Note: The suction efficiency of the product depends
on the dimension and quality of the filter and the filter
bag. Use only Husqvarna filter and filter bags.
6. Put the motor unit on the dirt container and lock the
clasps. (Fig. 12)
To clean the filter, filter cleaning system
The product has a semi-automatic filter cleaning system.
Use the filter cleaning system regularly, at the latest
when the cleaning performance is no longer sufficient.
Regular use of the filter cleaning system increases the
life of the filter.
1. Clean the filter when the suction power is no longer
sufficient. (Fig. 30)
2. Put the hose in the vacuum inlet on the front of the
product. (Fig. 16)
3. Connect the appliance into the mains.
4. Put the main switch to the "I" position. (Fig. 17)
5. Put the handle in your hand (A) to make suction into
your hand.
6. Beat the filter cleaning button 3 times with your fist
(B). (Fig. 31)
7. If the suction power is not sufficient, remove the
filter, see
To replace the filter on page 15
.
8. Shake, brush or wash the filter to clean it.
9. Let the filter dry.
10. Install the filter, see
To install the filter bag on page
12
.
14
562 - 004 - 20.03.2019