User Manual

Contents
Introduction.....................................................................7
Safety..............................................................................8
Assembly...................................................................... 12
Operation......................................................................13
Maintenance................................................................. 14
Transportation, storage and disposal........................... 15
Technical data.............................................................. 16
EC Declaration of Conformity....................................... 17
Introduction
Product description
The product is a multi purpose vacuum-cleaner
designed for commercial use.
Intended use
Use the product to clean dry, non-flammable dust and
liquids.
Read and obey the safety instructions and the operator's
instructions.
Only do maintenance and repair on the product that is
specified by the manufacturer.
The manufacturer accepts no liability for damage that is
a result of incorrect use, incorrect maintenance or
incorrect repair.
Product overview WDC 220, WDC 225
(Fig. 1)
1. Main switch
2. Filter cleaning system
3. Vacuum inlet
4. Wheels
5. Cable holder, Hose holder
6. Filter bag
7. Nozzle
8. Handle
9. Floor nozzle
10. Crevice nozzle
11. Operator's manual
12. Extension tube
13. Hose
Product overview WDC 325L
(Fig. 2)
1. Main switch
2. Filter cleaning system
3. Vacuum inlet
4. Wheels
5. Cable holder, Hose holder
6. Filter bag
7. Nozzle
8. Handle
9. Floor nozzle
10. Crevice nozzle
11. Operator's manual
12. Extension tube
13. Hose
14. Power tool adaptor
15. Electrical connection for power tool
16. Tool box
Symbols on the product
(Fig. 3) Read the operator's manual carefully and
make sure that you understand the
instructions before use.
(Fig. 4) The unit has double insulation.
(Fig. 5) Do not discard the unit with domestic waste.
Obey the local requirements.
(Fig. 6) The product agrees with the applicable EC
directives.
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Dust Class L
(Fig. 7)
Observe the safety advice and associated measures for
Dust Class L.
562 - 004 - 20.03.2019 7