Operator's Manual
Table Of Contents
- INTRODUCTION
- SYMBOLS AND DECALS
- SAFETY
- CONTROLS
- OPERATION
- MAINTENANCE
- LUBRICATION
- TROUBLESHOOTING
- STORAGE
- SCHEMATIC
- TECHNICAL DATA
- SERVICE JOURNAL
- INTRODUCCIÓN
- SÍMBOLOS Y RÓTULOS
- SEGURIDAD
- CONTROLES
- Palancas de control de la dirección
- Freno de estacionamiento
- Interruptor de encendido
- Medidor de servicio
- Interruptor de cuchilla
- Control del acelerador
- Estrangulador
- Palanca de ajuste del asiento
- Válvula de corte de combustible
- Fusible
- Palanca de altura de corte
- Desplazamiento
- Varillajes de derivación
- Depósito de combustible
- OPERACIÓN
- MANTENIMIENTO
- LUBRICACIÓN
- SOLUCIÓN DE PROBLEMAS
- ALMACENAMIENTO
- ESQUEMA
- DATOS TÉCNICOS
- REGISTRO DE SERVICIO
31
TECHNICAL DATA
ENGINE
Manufacturer Kawasaki
Type FR730V
Power
17.9 kW
1)
24 hp
1)
Lubrication Pressure with oil lter
Spark Plug
NGK BPR4ES
Gap: .030" (0,76 mm)
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 13.25 litres 3-1/2 gallons
Cooling Air cooled
Air lter Standard
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
TRANSMISSION
Transmission Hydrostatic transaxles
Steering control Dual levers, foam gripped
Speed forward 0–10.5 km/h 0–6.5 mi/h
Speed reverse 0–5.6 km/h 0–3.5 mi/h
Brakes Integrated Mechanical Park Brake
Front caster tires 11 x 6-5
Rear tires, turf pneumatic 18 x 9.5-8
Tire pressure 103 kPa / 1 bar / 15 psi
FRAME
Cutting Width 137 cm 54"
Cutting Height 3.8 cm – 10.2 cm 1-1/2" – 4"
Number of Blades 3
Blade Length 46.4 cm 18-1/4"
Anti-scalp roller 6 adjustable
Sprung Seat Standard
Hinged Arm Rests Optional
Service Meter Digital
Blade Engagement Ogura Clutch
Deck Construction 10 gauge fabricated
Productivity
11,311 m
2
/h
2.8 acres/h
DIMENSIONS
Weight 290 kg 640 lb
Base Machine Length 191 cm 75"
Base Machine Height 102 cm 40"
Base Machine Width 112 cm 43-3/4"
Overall Width, Chute Up 145 cm 57"
Overall Width, Chute Down
172 cm 67-1/2"
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.