Operator's Manual
Table Of Contents
- INTRODUCTION
- SYMBOLS AND DECALS
- SAFETY
- CONTROLS
- OPERATION
- MAINTENANCE
- LUBRICATION
- TROUBLESHOOTING
- STORAGE
- SCHEMATIC
- TECHNICAL DATA
- SERVICE JOURNAL
- INTRODUCCIÓN
- SÍMBOLOS Y RÓTULOS
- SEGURIDAD
- CONTROLES
- Palancas de control de la dirección
- Freno de estacionamiento
- Interruptor de encendido
- Medidor de servicio
- Interruptor de cuchilla
- Control del acelerador
- Estrangulador
- Palanca de ajuste del asiento
- Válvula de corte de combustible
- Fusible
- Palanca de altura de corte
- Desplazamiento
- Varillajes de derivación
- Depósito de combustible
- OPERACIÓN
- MANTENIMIENTO
- LUBRICACIÓN
- SOLUCIÓN DE PROBLEMAS
- ALMACENAMIENTO
- ESQUEMA
- DATOS TÉCNICOS
- REGISTRO DE SERVICIO
35
SERVICE JOURNAL
100-HOUR SERVICE
Action Date, mtr reading, stamp, sign
Do the 25-hour service
r
Do the 50-hour service
r
Change the engine oil lter
r
Clean/replace the spark plugs
r
Replace the fuel lter
r
Check V-belts
r
Check / tighten caster wheel axle bolts (at 200 hour intervals)
r
Change the air lter’s paper cartridge
r
300-HOUR SERVICE
Action Date, mtr reading, stamp, sign
Do the 25-hour service
r
Do the 50-hour service
r
Do the 100-hour service
r
Check / adjust the mower deck
r
Clean the combustion chamber and grind the valve seats
r
Check the engine valve clearance
r
Replace the air cleaner’s foam pre-lter
r
AT LEAST ONCE EACH YEAR
Action Date, mtr reading, stamp, sign
Clean the engine’s cooling air intake (at 25 hour intervals)
r
Replace the air cleaner’s foam pre-lter (at 50 hour intervals)
r
Replace the air lter’s paper cartridge
r
Change the engine oil (50 hours)
r
Replace the engine oil lter (100 hours)
r
Check / adjust the cutting height
r
Check / adjust the park brake (50 hours)
r
Clean / change the spark plugs (100 hours)
r
Change the fuel lter (100 hours)
r
Check the engine valve clearance
r