Operation Manual

English - 69
8. MAINTENANCE
8.3 Service
Leave your Automower
®
to a dealer for service prior to
winter storage. This is essential in order to keep the
mower in a good condition.
Service usually includes the following:
• Thorough cleaning of body, chassis, blade disc,
skid plate and all other moving parts.
• Testing of the mower’s function and components.
• Checking of wear components such as mower
blades and bearings.
• Testing of the mower’s battery capacity as well as
a recommendation of change if necessary.
• Relubrication of both chassis halves of the mower
in order to maintain moisture and wetness
resistance.
• If necessary the dealer can also load Automower
®
with new software, possibly including newly added
features.
8.4 After winter storage
During a service the dealer can clean the mower
thoroughly, test its function and components as well as
replace wear parts if necessary. If the charging or
contact strips appear to be burnt, clean them using fine
grade emery cloth. Check that the mower’s time and
date are correct.
8.5 Cleaning
It is important to keep Automower
®
clean. A mower
with a large amount of clippings negotiates slopes
very poorly. It is recommended to clean using a brush
and a spray with water.
Underframe and blade disc
1. Set the main switch to the OFF position.
2. Wear protective gloves.
3. Lift Automower
®
onto its side.
IMPORTANT INFORMATION
Never use a high-pressure washer or even
running water to clean the Automower
®
.
Solvent must never be used when cleaning.
OFF