Operation Manual

20 - English
3. INSTALLATION
The transformer shall be mounted on a vertical
surface, for example a house wall. Mount the
transformer with screws in the two attachment points.
Securing screws are not included. Choose screws
suitable for the wall material.
Mount the transformer at a height such that there is
no risk the transformer can become submerged in
water (minimum 12"/30 cm from the ground). The
transformer must never be placed on the ground.
Do not put the charging station in a corner or pocket
in the working area.
Avoid placing the charging station in a narrow
passage (narrower than about 10 ft (3 metres)).
Do not position the charging station so that the mower
can come closer than 10 ft (3 metres) behind the
charging station (for example on a narrow point). The
mower will not then find the charging station.
min 30cm/12”
10 ft