Operation Manual

English - 21
3. INSTALLATION
Installation and connecting the charging
station
1. Position the charging station in a suitable spot.
2. Attach the charging station to the ground using
the supplied screws.
3. Ensure the screws are secured all the way down
in the countersink.
4. Connect the low voltage cable to the charging
station.
Only use original cable and transformer.
5. Connect the low voltage cable to the
transformer.
The connectors may be slightly difficult to
connect, as they are moisture-proof.
6. Connect the transformer’s power cord to a 120 V
(230V) wall socket. It is preferable to use an
earth-fault breaker as recommended.
IMPORTANT INFORMATION
It is not permitted to make new holes in the
plate. Only the existing holes may be used to
secure the plate to the ground.