Operation Manual

22 - English
3. INSTALLATION
3.3 Charging the battery
Automower
®
is supplied with an uncharged battery. As
soon as the charging station is connected, it is possible to
charge the mower.
1. Set the main switch to the ON position.
2. Place
Automower
®
in the charging station to
charge the battery while you are laying the
boundary wire.
From an uncharged state the battery takes about 1
to 2 hours until it is fully char
ged.
IMPORTANT INFORMATION
Do not tread or walk on the charging station
plate.
IMPORTANT INFORMATION
Automower
®
cannot be used before the
installation is complete.