Operation Manual

3012-271
3012-272
3012-1301
3012-1337
English - 71
MAINTENANCE
8.3 After winter storage
Check whether the robotic lawnmower, contact strips or
charging strips need to be cleaned before using. If the
charging or contact strips appear to be burnt or coated,
clean them using ne grade emery cloth. Check that the
mower’s time and date are correct.
8.4 Cleaning
It is important to keep the robotic lawnmower clean.
A robotic lawnmower with a lot of grass stuck to it will
nd it harder to travel up slopes, perform worse and be
exposed to greater wear and tear. It is recommended to
clean using a soft brush.
IMPORTANT INFORMATION
Never use a high-pressure washer or even
running water to clean the robotic lawn-
mower. Never use solvents for cleaning.
Chassis and blade disc
1. Set the main switch to position 0.
2. Wear protective gloves.
3. Lift the robotic lawnmower onto its side.
4. Clean the blade disc and chassis using e.g. a dish
brush.
Check at the same time that the skid plate rotates freely
in relation to the blade disc.
If long blades of grass or other objects nd their way in,
these may impede the blade disc. Even a slight braking
effect leads to a higher consumption of energy and
longer mowing times, and at worst will prevent the robotic
lawnmower from being able to mow a large lawn. The
blade disc must be removed to carry out a more thorough
cleaning. If necessary, contact your dealer.
OM_1157863-26_HQ 310,315,EN_160229.indd 71 2016-02-29 10:52:36