Operation Manual

English - 76
TROUBLESHOOTING
Upside down
The robotic lawnmower is leaning too
much or has turned over.
Turn the robotic lawnmower the right way up.
Needs manual
charging
The robotic lawnmower is set to the
Secondary area operating mode.
Place the robotic lawnmower in the charging
station. This behaviour is normal and no action is
required.
Next start hh:mm
The timer setting prevents the robotic
lawnmower from operating.
Change the timer settings. See 6.3 Timer on
page 44.
The robotic lawnmower is currently in
standby.
The robotic lawnmower needs to be in the charging
station for at least 2 hours per day (6 hours for
Automower® 310). This is normal and no action is
required.
The clock on the robotic lawnmower
is not correct.
Set the time. See Time & date on page 61.
Empty battery
The robotic lawnmower cannot nd
the charging station.
The guide wire is broken or not connected.
The battery is spent.
The charging station’s antenna is defective.
Lifted
The lift sensor has been activated as
the mower has become trapped.
Free the mower
Collision sensor
problem, front/rear
Mower body can not move freely
around its chassis.
Check that the mower body can move freely
around its chassis.
If the problem remains, please contact your dealer
Wheel drive problem,
right/left
Grass or other object is wrapped
around the drive wheel.
Clean the wheels and around the wheels.
Alarm! Mower
switched off
The alarm was activated because the
mower was switched OFF.
Adjust the mower security level in the Security
menu.
Alarm! Mower stopped
The alarm was activated because the
mower was stopped.
Alarm! Mower lifted
The alarm was activated because the
mower was lifted.
Alarm! Mower tilted
The alarm was activated because the
mower was tilted.
Electronic problem
Temporary electronic or software
related issue in the mower.
Restart the mower. If the problem remains, please
contact your dealer.
Loop sensor problem,
front/rear
Charging system
problem
Tilt sensor problem
Temporary problem
Temporary battery
problem
Temporary battery related issue in
the mower.
Battery problem
Charging current too
high
Wrong or faulty power supply unit.
Verify you are using correct power supply unit. If
the problem remains, please contact your dealer.
OM_1157863-26_HQ 310,315,EN_160229.indd 76 2016-02-29 10:52:39